JABuyer Posted January 31, 2008 Posted January 31, 2008 When I try to transfer a movie from my hard drive to a blank DVD+R in the E drive I keep getting an I/O message. The write sectors are not always the same but the message is basically the same each time and is gives the message after about 2% of the transfer has been made. I have tried HP DVD+R and Verbatim DVD+R discs and the same message appears. What really confuses me iis that for the longest time the transfers worked fine. I do not think I did anything to change anything but I am not real computer savy so I may have by accident but I can not figure out what has happened. My computer is a Compaq Presario with windows XP and the E drive has the HP lightscribe. It would be greatly appreciated if one of the experts on this forum could take a look at the message I get and advise me what to do to fix it. The message is as follows; I/O Error! Devise:[0:0:0] HL-DP-ST DVDRRW GWA-4166B 1823 (E:) ATA ScSi:Status 0X02 Interpretation: Check Condition CDB: 2A 00 00 01 16 60 00 00 20 00 Interpretation: Write(10)-Sectors:71264-71295 Sense Are: 70 00 03 0000 0E 0000 80 04 00 00 00 00 Interpretation: Unknown (Vendor Unique) (0x80,0x04) Thank you John
JABuyer Posted February 1, 2008 Author Posted February 1, 2008 can you post your log please? I tried to transfer again and this is the log John I 20:32:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 20:32:52 Total Physical Memory: 1,039,660 KB - Available: 554,140 KB W 20:32:52 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 20:32:52 Drive K:\ (FAT32) does not support single files > 4 GB in size. I 20:32:52 Initialising SPTI... I 20:32:52 Searching for SCSI / ATAPI devices... I 20:32:52 Found 1 DVD-ROM and 1 DVD±RW! I 20:33:05 Operation Started! I 20:33:05 Source File: K:\FLETCH.MDS I 20:33:05 Source File Sectors: 2,285,858 (MODE1/2048) I 20:33:05 Source File Size: 4,681,437,184 bytes I 20:33:05 Source File Volume Identifier: FLETCH I 20:33:05 Source File Implementation Identifier: DVD Shrink I 20:33:05 Source File File System(s): ISO9660, UDF (1.02) I 20:33:05 Destination Device: [0:0:0] HL-DT-ST DVDRRW GWA-4166B 1823 (E:) (ATA) I 20:33:05 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x) I 20:33:05 Destination Media Sectors: 2,295,104 I 20:33:05 Write Mode: DVD I 20:33:05 Write Type: DAO I 20:33:05 Write Speed: MAX I 20:33:05 Link Size: Auto I 20:33:05 Test Mode: No I 20:33:05 BURN-Proof: Enabled I 20:33:06 Filling Buffer... (40 MB) I 20:33:07 Writing LeadIn... I 20:33:29 Writing Image... (LBA: 0 - 2285857) W 20:36:02 Failed to Write Sectors 62048 - 62079 - Spindle Servo Failure W 20:36:02 Retrying (1 of 20)... W 20:36:02 Retry Failed - No Seek Complete W 20:36:02 Retrying (2 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (3 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (4 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (5 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (6 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (7 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (8 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (9 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (10 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (11 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (12 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (13 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (14 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (15 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (16 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (17 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (18 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (19 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:02 Retrying (20 of 20)... W 20:36:02 Retry Failed - Invalid Address For Write W 20:36:37 Retrying (21)... W 20:36:37 Retry Failed - Invalid Address For Write E 20:36:38 Failed to Write Sectors 62048 - 62079 - Spindle Servo Failure I 20:36:38 Synchronising Cache... I 20:36:39 Closing Track... I 20:36:41 Finalising Disc... E 20:36:47 Failed to Write Image! E 20:36:47 Operation Failed! - Duration: 00:03:41 I 20:36:47 Average Write Rate: 656 KB/s (0.5x) - Maximum Write Rate: 1,985 KB/s (1.4x)
LIGHTNING UK! Posted February 1, 2008 Posted February 1, 2008 Do you have a HP machine? You could try this firmware update: http://h10025.www1.hp.com/ewfrf/wc/generic...=en&lang=en You might also like to consider ditching your discs and getting some better ones - Taiyo Yuden or Verbatim.
kevdriver Posted February 1, 2008 Posted February 1, 2008 John, first off get rid of the CMC MAG discs and buy some Verbatim DVD-R. CMC MAGs are utter rubbish. Also ensure that you have the latest firmware for your burner. Tools>Drive> check for firmware updates. I think the CMCs are your major problem now though. Edit: I'm just too damn slow.......
JABuyer Posted February 1, 2008 Author Posted February 1, 2008 I jsut tries DVD Decryper also and this is the log.What is the problem. Thanks John I 20:43:54 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 20:43:54 Drive D:\ (FAT32) does not support single files > 4 GB W 20:43:54 Drive K:\ (FAT32) does not support single files > 4 GB I 20:43:54 Initialising SPTI... I 20:43:54 Searching for SCSI / ATAPI devices... I 20:43:54 Found 1 DVD-ROM and 1 DVD±RW! I 20:44:01 Operation Started! I 20:44:01 Source File: K:\FLETCH.MDS I 20:44:01 Source File Sectors: 2,285,858 (MODE1/2048) I 20:44:01 Source File Size: 4,681,437,184 bytes I 20:44:01 Source File Implementation Identifier: DVD Shrink I 20:44:01 Destination Device: [0:0:0] HL-DT-ST DVDRRW GWA-4166B 1823 (E:) (ATA) I 20:44:01 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x) I 20:44:01 Destination Media Sectors: 2,295,104 I 20:44:01 Write Mode: DVD I 20:44:01 Write Type: SAO I 20:44:01 Write Speed: MAX I 20:44:01 Link Size: Auto I 20:44:01 Test Mode: No I 20:44:01 BURN-Proof: Enabled I 20:44:01 Filling Buffer... I 20:44:02 Writing LeadIn... I 20:44:25 Writing Image... W 20:46:18 Failed to Write Sectors 60032 - 60063 - Unknown (Vendor Unique) (0x80, 0x04) W 20:46:18 Retrying (1 of 20)... W 20:46:18 Retry Failed - No Seek Complete W 20:46:18 Retrying (2 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (3 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (4 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (5 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (6 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (7 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (8 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (9 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (10 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (11 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (12 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (13 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (14 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (15 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (16 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (17 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (18 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (19 of 20)... W 20:46:18 Retry Failed - Invalid Address For Write W 20:46:18 Retrying (20 of 20)... W 20:46:18 Retry Failed! - Invalid Address For Write E 20:47:11 Failed to Write Sectors 60032 - 60063 - Unknown (Vendor Unique) (0x80, 0x04) I 20:47:11 Synchronising Cache... I 20:47:11 Closing Track... I 20:47:13 Finalising Disc... E 20:47:39 Failed to Write Image! E 20:47:39 Operation Failed! - Duration: 00:03:37 I 20:47:39 Average Write Rate: 727 KB/s (0.5x) - Maximum Write Rate: 1,827 KB/s (1.3x)
JABuyer Posted February 1, 2008 Author Posted February 1, 2008 Do you have a HP machine? You could try this firmware update: http://h10025.www1.hp.com/ewfrf/wc/generic...=en&lang=en You might also like to consider ditching your discs and getting some better ones - Taiyo Yuden or Verbatim. Thanks for the reply. My machine is a Compaq Preserio I have tries both HP DVD+R Disc and Verbatin DVD+R John
kevdriver Posted February 1, 2008 Posted February 1, 2008 John, Same problem the Boss just answered from your above post about Imgburn.
LIGHTNING UK! Posted February 1, 2008 Posted February 1, 2008 Compaq and HP are the same thing. Download the firmware I linked to and install it to update your drive. http://h10025.www1.hp.com/ewfrf/wc/softwar...228&lang=en (slightly different version of the same page - uses 'compaq' logo) Oh and post a log when you're burning a Verbatim disc please.
JABuyer Posted February 1, 2008 Author Posted February 1, 2008 Compaq and HP are the same thing. Download the firmware I linked to and install it to update your drive. http://h10025.www1.hp.com/ewfrf/wc/softwar...228&lang=en (slightly different version of the same page - uses 'compaq' logo) Oh and post a log when you're burning a Verbatim disc please. I downloaded the firmware and it says to continue if you are using different transfer programs. you have to do different things but I do not use any of the programs listed to do the transfers I use either Imgburn or DVDecrypter to write to the disc. John
LIGHTNING UK! Posted February 1, 2008 Posted February 1, 2008 All you have to do is burn the ISO file! Load it in write mode and burn it to a CDR(W). Or if you have a floppy drive, put it on a floppy disc.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now