dunlop Posted February 5, 2008 Posted February 5, 2008 Perhaps I am just beating a dead horse here...but I figured it was worth a post. Of late it seems that Image Burn is taking a lot longer to Burn and Verify. In the past my burning time was about 18 minutes.... and now it's more than doubled. Checked out all the usual suspects Firmware update for LiteOn burner. DMA enabled on Primary and Secondary Using good media:Tayo Yuden Burning at 4-6x Could it be that the burner is finally on it's last legs? Have done about 1000 burns on this hardware.(At work so I don't have the model # available.) Thanks in advance for any feedback.
jmet Posted February 5, 2008 Posted February 5, 2008 What DMA mode is it in? Could you please post a log as well?
LIGHTNING UK! Posted February 5, 2008 Posted February 5, 2008 Follow the post in the FAQ about dealing with DMA issues - i.e. uninstall the IDE controller entry in Device Manager and reboot. If that doesn't work, get back to us with the log etc as jmet said.
dunlop Posted February 6, 2008 Author Posted February 6, 2008 Follow the post in the FAQ about dealing with DMA issues - i.e. uninstall the IDE controller entry in Device Manager and reboot. If that doesn't work, get back to us with the log etc as jmet said. Thanks people...here you go. ; ImgBurn Version 2.3.2.0 - Log ; Sunday, 03 February 2008, 23:33:47 ; \\****************************************// ; ; I 22:35:23 ImgBurn Version 2.3.2.0 started! I 22:35:23 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 22:35:23 Total Physical Memory: 981,488 KB - Available: 450,816 KB W 22:35:23 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 22:35:23 Initialising SPTI... I 22:35:23 Searching for SCSI / ATAPI devices... I 22:35:32 Found 2 DVD±RWs! I 22:36:18 Operation Started! I 22:36:18 Source File: C:\BLANKED_HILLS.ISO I 22:36:18 Source File Sectors: 2,245,488 (MODE1/2048) I 22:36:18 Source File Size: 4,598,759,424 bytes I 22:36:18 Source File Volume Identifier: BLANKED_HILLS I 22:36:18 Source File Implementation Identifier: DVD Shrink I 22:36:18 Source File File System(s): ISO9660, UDF (1.02) I 22:36:18 Destination Device: [5:1:0] LITE-ON DVDRW SHW-160P6S PS0B (F:) (ATA) I 22:36:18 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 6x, 8x, 12x, 16x) I 22:36:18 Destination Media Sectors: 2,298,496 I 22:36:18 Write Mode: DVD I 22:36:18 Write Type: DAO I 22:36:18 Write Speed: 6x I 22:36:18 Link Size: Auto I 22:36:18 Test Mode: No I 22:36:18 BURN-Proof: Enabled I 22:36:18 Filling Buffer... (20 MB) I 22:36:19 Writing LeadIn... I 22:37:23 Writing Image... (LBA: 0 - 2245487) I 23:05:28 Synchronising Cache... I 23:05:47 Image MD5: 3e879efbd179d00043e8b9e8b787d507 I 23:05:47 Operation Successfully Completed! - Duration: 00:29:29 I 23:05:47 Average Write Rate: 2,665 KB/s (1.9x) - Maximum Write Rate: 2,906 KB/s (2.1x) I 23:05:47 Cycling Tray before Verify... W 23:05:56 Waiting for device to become ready... I 23:06:08 Device Ready! I 23:06:09 Operation Started! I 23:06:09 Source Device: [5:1:0] LITE-ON DVDRW SHW-160P6S PS0B (F:) (ATA) I 23:06:09 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG03) (Speeds: 6x, 8x, 12x, 16x) I 23:06:09 Image File: C:\BLANKED_HILLS.ISO I 23:06:09 Image File Sectors: 2,245,488 (MODE1/2048) I 23:06:09 Image File Size: 4,598,759,424 bytes I 23:06:09 Image File Volume Identifier: BLANKED_HILLS I 23:06:09 Image File Implementation Identifier: DVD Shrink I 23:06:09 Image File File System(s): ISO9660, UDF (1.02) I 23:06:09 Verifying Sectors... (LBA: 0 - 2245487) I 23:33:43 Device MD5: 3e879efbd179d00043e8b9e8b787d507 I 23:33:43 Image MD5: 3e879efbd179d00043e8b9e8b787d507 I 23:33:46 File Successfully Deleted: C:\BLANKED_HILLS.ISO I 23:33:46 Operation Successfully Completed! - Duration: 00:27:34 I 23:33:46 Average Verify Rate: 2,715 KB/s (2.0x) - Maximum Verify Rate: 3,157 KB/s (2.3x) I 23:33:46 Close Request Acknowledged I 23:33:46 Closing Down... I 23:33:46 Shutting down SPTI... I 23:33:47 ImgBurn closed!
dunlop Posted February 6, 2008 Author Posted February 6, 2008 Follow the post in the FAQ about dealing with DMA issues - i.e. uninstall the IDE controller entry in Device Manager and reboot. If that doesn't work, get back to us with the log etc as jmet said. Thanks people...here you go. ; ImgBurn Version 2.3.2.0 - Log ; Sunday, 03 February 2008, 23:33:47 ; \\****************************************// ; ; I 22:35:23 ImgBurn Version 2.3.2.0 started! I 22:35:23 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 22:35:23 Total Physical Memory: 981,488 KB - Available: 450,816 KB W 22:35:23 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 22:35:23 Initialising SPTI... I 22:35:23 Searching for SCSI / ATAPI devices... I 22:35:32 Found 2 DVD±RWs! I 22:36:18 Operation Started! I 22:36:18 Source File: C:\BLANKED_HILLS.ISO I 22:36:18 Source File Sectors: 2,245,488 (MODE1/2048) I 22:36:18 Source File Size: 4,598,759,424 bytes I 22:36:18 Source File Volume Identifier: BLANKED_HILLS I 22:36:18 Source File Implementation Identifier: DVD Shrink I 22:36:18 Source File File System(s): ISO9660, UDF (1.02) I 22:36:18 Destination Device: [5:1:0] LITE-ON DVDRW SHW-160P6S PS0B (F:) (ATA) I 22:36:18 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 6x, 8x, 12x, 16x) I 22:36:18 Destination Media Sectors: 2,298,496 I 22:36:18 Write Mode: DVD I 22:36:18 Write Type: DAO I 22:36:18 Write Speed: 6x I 22:36:18 Link Size: Auto I 22:36:18 Test Mode: No I 22:36:18 BURN-Proof: Enabled I 22:36:18 Filling Buffer... (20 MB) I 22:36:19 Writing LeadIn... I 22:37:23 Writing Image... (LBA: 0 - 2245487) I 23:05:28 Synchronising Cache... I 23:05:47 Image MD5: 3e879efbd179d00043e8b9e8b787d507 I 23:05:47 Operation Successfully Completed! - Duration: 00:29:29 I 23:05:47 Average Write Rate: 2,665 KB/s (1.9x) - Maximum Write Rate: 2,906 KB/s (2.1x) I 23:05:47 Cycling Tray before Verify... W 23:05:56 Waiting for device to become ready... I 23:06:08 Device Ready! I 23:06:09 Operation Started! I 23:06:09 Source Device: [5:1:0] LITE-ON DVDRW SHW-160P6S PS0B (F:) (ATA) I 23:06:09 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG03) (Speeds: 6x, 8x, 12x, 16x) I 23:06:09 Image File: C:\BLANKED_HILLS.ISO I 23:06:09 Image File Sectors: 2,245,488 (MODE1/2048) I 23:06:09 Image File Size: 4,598,759,424 bytes I 23:06:09 Image File Volume Identifier: BLANKED_HILLS I 23:06:09 Image File Implementation Identifier: DVD Shrink I 23:06:09 Image File File System(s): ISO9660, UDF (1.02) I 23:06:09 Verifying Sectors... (LBA: 0 - 2245487) I 23:33:43 Device MD5: 3e879efbd179d00043e8b9e8b787d507 I 23:33:43 Image MD5: 3e879efbd179d00043e8b9e8b787d507 I 23:33:46 File Successfully Deleted: C:\BLANKED_HILLS.ISO I 23:33:46 Operation Successfully Completed! - Duration: 00:27:34 I 23:33:46 Average Verify Rate: 2,715 KB/s (2.0x) - Maximum Verify Rate: 3,157 KB/s (2.3x) I 23:33:46 Close Request Acknowledged I 23:33:46 Closing Down... I 23:33:46 Shutting down SPTI... I 23:33:47 ImgBurn closed! Ooooppps..,.read the FAQ's and did the uninstall.
cornholio7 Posted February 6, 2008 Posted February 6, 2008 did you delete the controller and reboot? you have dma problems
dunlop Posted February 6, 2008 Author Posted February 6, 2008 did you delete the controller and reboot?you have dma problems Cornholio7 and all, thanks for your time and patience. Just to make sure...my Device Manager reads: IDEA ATA/ATAPI Controllers Primary IDE Channel Primary IDE Channel Primary IDE Channel Secondary IDE Channel Secondary IDE Channel Secondary IDE Channel Standard Dual Channel PCI IDE Controller The last entry Standard Dual........is the one I wish to uninstall and reboot? Thanks again
LIGHTNING UK! Posted February 6, 2008 Posted February 6, 2008 You only have 1 entry that says 'controller' ? Just delete them all until that entire branch is empty, then reboot - but start with the controller because it'll remove the channels along with it.
dunlop Posted February 6, 2008 Author Posted February 6, 2008 Lightning UK!. Thanks so much for your response..and sorry for the insipid questions , but here goes: The last three items in Bold are the ones I need to delete(uninstall)..not the entire tier. And, if I am unable to resolve the issue, is this a harbinger of more evil things to come. Worst case scenario, I can live with longer burning times.The DVD's that I have backed up,albeit taking longer, have all been flawless burns. IDEA ATA/ATAPI Controllers Primary IDE Channel Primary IDE Channel Primary IDE Channel Secondary IDE Channel Secondary IDE Channel Secondary IDE Channel Standard Dual Channel PCI IDE Controller ]Standard Dual Channel PCI IDE Controller ]Standard Dual Channel PCI IDE Controller
LIGHTNING UK! Posted February 6, 2008 Posted February 6, 2008 Yes, uninstall all the controller entries and then reboot. If it asks you to reboot before you've deleted all 3, just click no.
dunlop Posted February 6, 2008 Author Posted February 6, 2008 Yes, uninstall all the controller entries and then reboot. If it asks you to reboot before you've deleted all 3, just click no. Thanks again UK Lightning!. Got 3 more hours of work and a blizzard to contend with before I can follow your advice. Will post results.
dunlop Posted February 6, 2008 Author Posted February 6, 2008 Yes, uninstall all the controller entries and then reboot. If it asks you to reboot before you've deleted all 3, just click no. Thanks again UK Lightning!. Got 3 more hours of work and a blizzard to contend with before I can follow your advice. Will post results. Eureka.....Followed your advice, deleted and rebooted. Burned and verified in 16+ minutes. Thanks for your patience and efforts.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now