Finding Pioneer drive in Image Burn

[Lighting]

Having problem finding my DVD RW Drive in Image Burn wondering if any one had any ideas have a Pioneer DVD-RWDVDR-104

 

In image burn after choosing book type bottom right hand corner Change book Type screen comes up tried all tabs cannot fine a tab to work with my drive

 

Any help will be appreciated will image burn work with this drive?

 

TY

[cornholio7]

pioneer auto set dual layer to -rom.

you need a special firmware to set +r discs to rom, there are no settings in imgburn to adjust pioneer drives

[Lighting]

pioneer auto set dual layer to -rom.

you need a special firmware to set +r discs to rom, there are no settings in imgburn to adjust pioneer drives

 

 

So it would be Best to get a new drive then?

Thanks for Help

[cornholio7]

only if you want one, i have 2 pioneer drives , both work fine , i use mainly -R discs

[Lighting]

only if you want one, i have 2 pioneer drives , both work fine , i use mainly -R discs

 

 

I am confused then what is the next step if I wont to keep my drive do I need firmware? If so where and how please

 

TY

[Lighting]

only if you want one, i have 2 pioneer drives , both work fine , i use mainly -R discs

 

 

I am confused then what is the next step if I wont to keep my drive do I need firmware? If so where and how please

 

TY

[LIGHTNING UK!]

I'm not even sure if bitsetting was really around when the 104 came out... that drive is pretty old now!

 

The 'Pioneer' forum at CDFreaks is probably a good place to start looking for info.

 

Are you actually having a problem with +R discs not being recognised at all in your players or something? Otherwise you don't really have anything to gain by bitsetting.

[Lighting]

I'm not even sure if bitsetting was really around when the 104 came out... that drive is pretty old now!

 

The 'Pioneer' forum at CDFreaks is probably a good place to start looking for info.

 

Are you actually having a problem with +R discs not being recognised at all in your players or something? Otherwise you don't really have anything to gain by bitsetting.

 

This all started with a Wii ISO Burn following instructions from http://www.thegameforum.com/nintendo-wii-g...i-iso-pics.html

got hung up on change book type screen and selecting drive

 

TY

[dontasciime]

You will need to buy a new drive as pioneer 104 cannot booktype DVD-ROM also the guide you are following the last piece of advice is to not bother verifying with a witty it's just wasting someones time. DO NOT follow that bit of advice and ALWAYS VERIFY after burning anything.

[Lighting]

You will need to buy a new drive as pioneer 104 cannot booktype DVD-ROM also the guide you are following the last piece of advice is to not bother verifying with a witty it's just wasting someones time. DO NOT follow that bit of advice and ALWAYS VERIFY after burning anything.

 

 

Thanks for the Information and time muchly apreciated

[dontasciime]

If you can get a benq 1650/55 those have been excellent for my Wii backups.

 

The Liteon 20A1P (I have 3 of them) non of them can burn Wii backups with consistency using top quality media eg taiyo yuden and verbatim example I burn a verb @4x wii starts to read it then gives up, the next one is fine, then next 3 fail, stick same image on CMC mag media and it works then go back to verb and taiyo yuden and fail ~KLON firmware in all liteons.

 

Switch to one of my benq and not a single failure on over 30 backups.

 

Trying to find a new benq 1650 will be very hard work I thought I would just mention the liteon (however the drive in my wii is brand new but no 2 wii drives are exactly the same so other users may have had no issues with their liteon 20a1p and wii backups)

 

It will be a question of take the plunge, use good media burnt @ 4x finding media that will burn @2x in newer writers and newer media will require a bit of luck also