swany Posted February 18, 2008 Posted February 18, 2008 Log posted below, I am getting "Potential 'WaitImmediateIO' Deferred Error - (1/3) - Write Error" and not able to find determine, or find root cause. Thanks! Once again, an awesome product!!! Keep up the good work. ; //****************************************\\ ; ImgBurn Version 2.4.0.0 - Log ; Sunday, 10 February 2008, 18:36:19 ; \\****************************************// ; ; I 18:17:43 ImgBurn Version 2.4.0.0 started! I 18:17:43 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2) I 18:17:43 Total Physical Memory: 8,386,732 KB - Available: 6,872,196 KB I 18:17:43 Initialising SPTI... I 18:17:43 Searching for SCSI / ATAPI devices... I 18:17:43 Found 1 DVD±RW/RAM! I 18:18:35 Operation Started! I 18:18:35 Source File: C:\ISO's\XXXXXXXXX.iso I 18:18:35 Source File Sectors: 2,289,493 (MODE1/2048) I 18:18:35 Source File Size: 4,688,881,664 bytes I 18:18:35 Source File Volume Identifier: THE_OUTSIDERS I 18:18:35 Source File Volume Set Identifier: 47AF83B8________XXXXXXXXXX I 18:18:35 Source File Application Identifier: ELBY CLONEDVD I 18:18:35 Source File Implementation Identifier: ELABORATE BYTES I 18:18:35 Source File File System(s): ISO9660, UDF (1.02) I 18:18:35 Destination Device: [2:1:0] Optiarc DVD RW AD-7190S 1.01 (E:) (ATAPI) I 18:18:35 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 18:18:35 Destination Media Sectors: 2,298,496 I 18:18:35 Write Mode: DVD I 18:18:35 Write Type: DAO I 18:18:35 Write Speed: MAX I 18:18:35 Link Size: Auto I 18:18:35 Test Mode: No I 18:18:35 OPC: Yes I 18:18:35 BURN-Proof: Enabled I 18:18:36 Filling Buffer... (40 MB) I 18:18:36 Writing LeadIn... I 18:19:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 2289492) I 18:19:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2289492) I 18:26:41 Synchronising Cache... W 18:27:06 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Write Error W 18:27:06 Synchronise Cache Failed! - Reason: Write Error W 18:27:06 Retrying (2 of 3)... I 18:27:07 Exporting Graph Data... I 18:27:07 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190S_1.01_SUNDAY-FEBRUARY-10-2008_6-18_PM_TYG02_MAX.ibg I 18:27:07 Export Successfully Completed! I 18:27:07 Operation Successfully Completed! - Duration: 00:08:32 I 18:27:07 Average Write Rate: 10,130 KB/s (7.3x) - Maximum Write Rate: 11,270 KB/s (8.1x) I 18:36:19 Close Request Acknowledged I 18:36:19 Closing Down... I 18:36:19 Shutting down SPTI... I 18:36:19 ImgBurn closed!
LIGHTNING UK! Posted February 18, 2008 Posted February 18, 2008 Is this on every burn you do? How many have you tested? If you re-enable the 'Verify' option, does it pass ok?
blutach Posted February 18, 2008 Posted February 18, 2008 Try a firmware update - http://forum.rpc1.org/dl_firmware.php?download_id=2435 And turn verify on. Regards
swany Posted February 18, 2008 Author Posted February 18, 2008 Yes, so far it does it on everyone that I burn. I have not updated firmware. I will burn one now, with verify checked to see what happens. Then I will update firmware and see what happens. I will say that even with the error it seems to burn fine, and the disc works. Have not watched one fully through yet, but DVD player will read it. I will let you know.
LIGHTNING UK! Posted February 18, 2008 Posted February 18, 2008 I looked for firmware updates but I think the S in AD-7190S means it's SATA, PATA. The 7190S doesn't even exist according to http://www.sonynec-optiarc.eu/en/support-s...-ad-series.html but I know it's the same as the 7191S but without lightscribe. The latest for the 7191S is still 1.01. You could cross flash it to a LiteOn DH-20A3S and be done with it!
swany Posted February 18, 2008 Author Posted February 18, 2008 I turned Verify on and it gave an error again. below is the log and i have a screen shot, which is attached. The disc how ever works fine, i just placed it in the dvd player and skipped through all chapters and it works fine. plays and fast forwards fine also. BTW, thanks for the fast replies!!!! I 18:58:23 ImgBurn Version 2.4.0.0 started! I 18:58:23 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2) I 18:58:23 Total Physical Memory: 8,386,732 KB - Available: 6,338,636 KB I 18:58:23 Initialising SPTI... I 18:58:23 Searching for SCSI / ATAPI devices... I 18:58:23 Found 1 DVD±RW and 1 DVD±RW/RAM! I 18:59:17 Operation Started! I 18:59:17 Source File: C:\ISO's\ST_ELMOS_FIRE.iso I 18:59:17 Source File Sectors: 2,289,513 (MODE1/2048) I 18:59:17 Source File Size: 4,688,922,624 bytes I 18:59:17 Source File Volume Identifier: ST_ELMOS_FIRE I 18:59:17 Source File Volume Set Identifier: 47AF8AF4________ST_ELMOS_FIRE I 18:59:17 Source File Application Identifier: ELBY CLONEDVD I 18:59:17 Source File Implementation Identifier: ELABORATE BYTES I 18:59:17 Source File File System(s): ISO9660, UDF (1.02) I 18:59:17 Destination Device: [2:1:0] Optiarc DVD RW AD-7190S 1.01 (E:) (ATAPI) I 18:59:17 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 18:59:17 Destination Media Sectors: 2,298,496 I 18:59:17 Write Mode: DVD I 18:59:17 Write Type: DAO I 18:59:17 Write Speed: MAX I 18:59:17 Link Size: Auto I 18:59:17 Test Mode: No I 18:59:17 OPC: Yes I 18:59:17 BURN-Proof: Enabled I 18:59:20 Filling Buffer... (40 MB) I 18:59:20 Writing LeadIn... I 18:59:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 2289512) I 18:59:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2289512) I 19:07:26 Synchronising Cache... W 19:07:48 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Write Error W 19:07:48 Synchronise Cache Failed! - Reason: Write Error W 19:07:48 Retrying (2 of 3)... I 19:07:49 Exporting Graph Data... I 19:07:49 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190S_1.01_SUNDAY-FEBRUARY-17-2008_6-59_PM_TYG02_MAX.ibg I 19:07:49 Export Successfully Completed! I 19:07:49 Operation Successfully Completed! - Duration: 00:08:31 I 19:07:49 Average Write Rate: 10,130 KB/s (7.3x) - Maximum Write Rate: 11,237 KB/s (8.1x) I 19:07:49 Cycling Tray before Verify... I 19:07:49 Device Ready! I 19:07:49 Operation Started! I 19:07:49 Source Device: [2:1:0] Optiarc DVD RW AD-7190S 1.01 (E:) (ATAPI) I 19:07:49 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 19:07:49 Image File: C:\ISO's\ST_ELMOS_FIRE.iso I 19:07:49 Image File Sectors: 2,289,513 (MODE1/2048) I 19:07:49 Image File Size: 4,688,922,624 bytes I 19:07:49 Image File Volume Identifier: ST_ELMOS_FIRE I 19:07:49 Image File Volume Set Identifier: 47AF8AF4________ST_ELMOS_FIRE I 19:07:49 Image File Application Identifier: ELBY CLONEDVD I 19:07:49 Image File Implementation Identifier: ELABORATE BYTES I 19:07:49 Image File File System(s): ISO9660, UDF (1.02) I 19:07:49 Read Speed (Data/Audio): MAX / MAX I 19:07:49 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2289512) I 19:07:49 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2289512) E 19:09:06 Failed to Read Sector 0 - Logical Block Address out of Range E 19:09:06 Failed to Verify Sectors! I 19:09:06 Exporting Graph Data... I 19:09:06 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190S_1.01_SUNDAY-FEBRUARY-17-2008_6-59_PM_TYG02_MAX.ibg I 19:09:06 Export Successfully Completed! E 19:09:06 Operation Failed! - Duration: 00:01:16 I 19:09:06 Average Verify Rate: N/A - Maximum Verify Rate: N/A imgburn.bmp
LIGHTNING UK! Posted February 18, 2008 Posted February 18, 2008 hmm verify failed so the drive thinks the disc is a coaster.
LIGHTNING UK! Posted February 18, 2008 Posted February 18, 2008 FYI, the latest 'test' 20A3S firmware (direct from someone at liteon) is available here: http://www.4shared.com/account/dir/5572060...t_Firmware.html You want the 9V63WIN.rar one.
swany Posted February 18, 2008 Author Posted February 18, 2008 (edited) so i updated the firmware form the link you provided. However it appears the PC and applications read it as the same old Optiarc drive. Below is the log. Once again the disc works fine. I 19:34:35 ImgBurn Version 2.4.0.0 started! I 19:34:35 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2) I 19:34:35 Total Physical Memory: 8,386,732 KB - Available: 7,381,116 KB I 19:34:35 Initialising SPTI... I 19:34:35 Searching for SCSI / ATAPI devices... I 19:34:35 Found 1 DVD±RW and 1 DVD±RW/RAM! I 19:35:36 Operation Started! I 19:35:36 Source File: F:\Across_The_Universe.iso I 19:35:36 Source File Sectors: 2,288,662 (MODE1/2048) I 19:35:36 Source File Size: 4,687,179,776 bytes I 19:35:36 Source File Volume Identifier: Across_The_Universe I 19:35:36 Source File Volume Set Identifier: 47A8AB23________Across_The_Universe I 19:35:36 Source File Application Identifier: ELBY CLONEDVD I 19:35:36 Source File Implementation Identifier: ELABORATE BYTES I 19:35:36 Source File File System(s): ISO9660, UDF (1.02) I 19:35:36 Destination Device: [2:1:0] Optiarc DVD RW AD-7190S 1.01 (E:) (ATAPI) I 19:35:36 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 19:35:36 Destination Media Sectors: 2,298,496 I 19:35:36 Write Mode: DVD I 19:35:36 Write Type: DAO I 19:35:36 Write Speed: MAX I 19:35:36 Link Size: Auto I 19:35:36 Test Mode: No I 19:35:36 OPC: Yes I 19:35:36 BURN-Proof: Enabled I 19:35:37 Filling Buffer... (40 MB) I 19:35:38 Writing LeadIn... I 19:36:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 2288661) I 19:36:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2288661) I 19:43:44 Synchronising Cache... W 19:44:00 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Write Error W 19:44:00 Synchronise Cache Failed! - Reason: Write Error W 19:44:00 Retrying (2 of 3)... I 19:44:01 Exporting Graph Data... I 19:44:02 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190S_1.01_SUNDAY-FEBRUARY-17-2008_7-35_PM_TYG02_MAX.ibg I 19:44:02 Export Successfully Completed! I 19:44:02 Operation Successfully Completed! - Duration: 00:08:25 I 19:44:02 Average Write Rate: 10,126 KB/s (7.3x) - Maximum Write Rate: 11,263 KB/s (8.1x) I 19:44:02 Cycling Tray before Verify... I 19:44:02 Device Ready! I 19:44:02 Operation Started! I 19:44:02 Source Device: [2:1:0] Optiarc DVD RW AD-7190S 1.01 (E:) (ATAPI) I 19:44:02 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 19:44:02 Image File: F:\xxxxxxxxx.iso I 19:44:02 Image File Sectors: 2,288,662 (MODE1/2048) I 19:44:02 Image File Size: 4,687,179,776 bytes I 19:44:02 Image File Volume Identifier: xxxxxxxxx I 19:44:02 Image File Volume Set Identifier: 47A8AB23 I 19:44:02 Image File Application Identifier: ELBY CLONEDVD I 19:44:02 Image File Implementation Identifier: ELABORATE BYTES I 19:44:02 Image File File System(s): ISO9660, UDF (1.02) I 19:44:02 Read Speed (Data/Audio): MAX / MAX I 19:44:02 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2288661) I 19:44:02 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2288661) W 19:44:09 Failed to Read Sector 0 - Logical Block Address out of Range W 19:44:09 Failed to Read Sector 1 - Logical Block Address out of Range E 19:44:10 Failed to Read Sector 2 - Logical Block Address out of Range E 19:44:11 Failed to Verify Sectors! I 19:44:11 Exporting Graph Data... I 19:44:11 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190S_1.01_SUNDAY-FEBRUARY-17-2008_7-35_PM_TYG02_MAX.ibg I 19:44:11 Export Successfully Completed! E 19:44:11 Operation Failed! - Duration: 00:00:08 I 19:44:11 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 0 KB/s (0.0x) Edited February 18, 2008 by swany
LIGHTNING UK! Posted February 18, 2008 Posted February 18, 2008 My link or Blu's one? If you used mine, it didn't work or you selected the wrong drive!
swany Posted February 18, 2008 Author Posted February 18, 2008 I followed the link that you provided and used 9V63WIN.rar as the file to Flash. It says to update from the 1.01, but when its done nothing happens.
LIGHTNING UK! Posted February 18, 2008 Posted February 18, 2008 But it does actually go through the flashing process - whereby the progress bar counts up etc? Do you get a 'success' (or 'error') message at the end of it or just nothing at all?
swany Posted February 18, 2008 Author Posted February 18, 2008 I get a success, but on a reboot after words nothing changes. i have tried 2 different flashes from "wind" and nothing seems to be working to flash it.
LIGHTNING UK! Posted February 18, 2008 Posted February 18, 2008 Fancy trying this method instead then? http://club.cdfreaks.com/f86/how-crossflas...h-20a3x-235438/ Maybe if you can get the latest official LiteOn firmware on the drive properly, the test ones will then go on too.
swany Posted February 18, 2008 Author Posted February 18, 2008 Yes, i followed the shortcut method, get the right firmware and flash the firmware with out the flash tool. On another note i will say that I have the IDE version of this drive also. I put them both in the same computer, and have burned a successful with verify using the IDE drive. I am going to try again with the SATA drive to see if that makes a difference now. here is the log with the IDE drive. I 10:50:31 ImgBurn Version 2.4.0.0 started! I 10:50:31 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2) I 10:50:31 Total Physical Memory: 8,386,732 KB - Available: 7,434,684 KB I 10:50:31 Initialising SPTI... I 10:50:31 Searching for SCSI / ATAPI devices... I 10:50:31 Found 2 DVD±RW/RAMs! I 10:51:04 Operation Started! I 10:51:04 Source File: F:\xxxxxxxxx.iso I 10:51:04 Source File Sectors: 2,283,400 (MODE1/2048) I 10:51:04 Source File Size: 4,676,403,200 bytes I 10:51:04 Source File Volume Identifier: xxxxxxxx I 10:51:04 Source File Volume Set Identifier: 47A344AD________xxxxxxxxx I 10:51:04 Source File Application Identifier: ELBY CLONEDVD I 10:51:04 Source File Implementation Identifier: ELABORATE BYTES I 10:51:04 Source File File System(s): ISO9660, UDF (1.02) I 10:51:04 Destination Device: [1:0:0] Optiarc DVD RW AD-7190A 1.02 (D:) (ATA) I 10:51:04 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 10:51:04 Destination Media Sectors: 2,297,888 I 10:51:04 Write Mode: DVD I 10:51:04 Write Type: DAO I 10:51:04 Write Speed: MAX I 10:51:04 Link Size: Auto I 10:51:04 Test Mode: No I 10:51:04 OPC: Yes I 10:51:04 BURN-Proof: Enabled I 10:51:16 Filling Buffer... (40 MB) I 10:51:17 Writing LeadIn... I 10:51:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 2283399) I 10:51:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2283399) I 10:59:19 Synchronising Cache... I 10:59:33 Exporting Graph Data... I 10:59:33 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190A_1.02_MONDAY-FEBRUARY-18-2008_10-51_AM_TYG02_MAX.ibg I 10:59:33 Export Successfully Completed! I 10:59:33 Operation Successfully Completed! - Duration: 00:08:29 I 10:59:33 Average Write Rate: 9,906 KB/s (7.2x) - Maximum Write Rate: 11,211 KB/s (8.1x) I 10:59:33 Cycling Tray before Verify... W 10:59:40 Waiting for device to become ready... I 10:59:56 Device Ready! I 11:00:01 Operation Started! I 11:00:01 Source Device: [1:0:0] Optiarc DVD RW AD-7190A 1.02 (D:) (ATA) I 11:00:01 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 11:00:01 Image File: F:\CHARMED_S8_D3.iso I 11:00:01 Image File Sectors: 2,283,400 (MODE1/2048) I 11:00:01 Image File Size: 4,676,403,200 bytes I 11:00:01 Image File Volume Identifier: xxxxxx I 11:00:01 Image File Volume Set Identifier: 47A344AD________xxxxxxxx I 11:00:01 Image File Application Identifier: ELBY CLONEDVD I 11:00:01 Image File Implementation Identifier: ELABORATE BYTES I 11:00:01 Image File File System(s): ISO9660, UDF (1.02) I 11:00:01 Read Speed (Data/Audio): MAX / MAX I 11:00:01 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2283399) I 11:00:01 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2283399) I 11:04:58 Exporting Graph Data... I 11:04:58 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190A_1.02_MONDAY-FEBRUARY-18-2008_10-51_AM_TYG02_MAX.ibg I 11:04:58 Export Successfully Completed! I 11:04:58 Operation Successfully Completed! - Duration: 00:04:57 I 11:04:58 Average Verify Rate: 15,376 KB/s (11.1x) - Maximum Verify Rate: 22,309 KB/s (16.1x)
swany Posted February 18, 2008 Author Posted February 18, 2008 SATA failed again, but the IDE works just fine. Guess I will be using the SATA as a ripper and the IDE as a burner for now. I have posted the log below for the SATA. Let me know if you have any more ideas. I have tried numerous times to get the firmware to update with no success, almost wonder if the drive is bad. I 11:09:05 ImgBurn Version 2.4.0.0 started! I 11:09:05 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2) I 11:09:05 Total Physical Memory: 8,386,732 KB - Available: 7,353,528 KB I 11:09:05 Initialising SPTI... I 11:09:05 Searching for SCSI / ATAPI devices... I 11:09:16 Found 2 DVD±RW/RAMs! I 11:09:26 Operation Started! I 11:09:26 Source File: F:\xxxxxx.iso I 11:09:26 Source File Sectors: 2,283,123 (MODE1/2048) I 11:09:26 Source File Size: 4,675,835,904 bytes I 11:09:26 Source File Volume Identifier: xxxxxxxx I 11:09:26 Source File Volume Set Identifier: 47A337C0________xxxxxxxxxx I 11:09:26 Source File Application Identifier: ELBY CLONEDVD I 11:09:26 Source File Implementation Identifier: ELABORATE BYTES I 11:09:26 Source File File System(s): ISO9660, UDF (1.02) I 11:09:26 Destination Device: [2:1:0] Optiarc DVD RW AD-7190S 1.01 (E:) (ATAPI) I 11:09:26 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 11:09:26 Destination Media Sectors: 2,297,888 I 11:09:26 Write Mode: DVD I 11:09:26 Write Type: DAO I 11:09:26 Write Speed: MAX I 11:09:26 Link Size: Auto I 11:09:26 Test Mode: No I 11:09:26 OPC: Yes I 11:09:26 BURN-Proof: Enabled I 11:09:27 Filling Buffer... (40 MB) I 11:09:28 Writing LeadIn... I 11:10:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 2283122) I 11:10:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2283122) I 11:17:32 Synchronising Cache... W 11:17:47 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Write Error W 11:17:47 Synchronise Cache Failed! - Reason: Write Error W 11:17:47 Retrying (2 of 3)... I 11:17:48 Exporting Graph Data... I 11:17:48 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190S_1.01_MONDAY-FEBRUARY-18-2008_11-09_AM_TYG02_MAX.ibg I 11:17:48 Export Successfully Completed! I 11:17:48 Operation Successfully Completed! - Duration: 00:08:22 I 11:17:48 Average Write Rate: 10,124 KB/s (7.3x) - Maximum Write Rate: 11,263 KB/s (8.1x) I 11:17:48 Cycling Tray before Verify... I 11:17:48 Device Ready! I 11:17:48 Operation Started! I 11:17:48 Source Device: [2:1:0] Optiarc DVD RW AD-7190S 1.01 (E:) (ATAPI) I 11:17:48 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 11:17:48 Image File: F:\xxxxxx.iso I 11:17:48 Image File Sectors: 2,283,123 (MODE1/2048) I 11:17:48 Image File Size: 4,675,835,904 bytes I 11:17:48 Image File Volume Identifier: CHARMED_S8_D4 I 11:17:48 Image File Volume Set Identifier: 47A337C0________xxxxx I 11:17:48 Image File Application Identifier: ELBY CLONEDVD I 11:17:48 Image File Implementation Identifier: ELABORATE BYTES I 11:17:48 Image File File System(s): ISO9660, UDF (1.02) I 11:17:48 Read Speed (Data/Audio): MAX / MAX I 11:17:48 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2283122) I 11:17:48 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2283122) W 11:17:52 Failed to Read Sector 0 - Logical Block Address out of Range W 11:17:53 Failed to Read Sector 1 - Logical Block Address out of Range W 11:17:53 Failed to Read Sector 2 - Logical Block Address out of Range W 11:17:53 Failed to Read Sector 3 - Logical Block Address out of Range W 11:17:54 Failed to Read Sector 4 - Logical Block Address out of Range W 11:17:54 Failed to Read Sector 5 - Logical Block Address out of Range W 11:17:54 Failed to Read Sector 6 - Logical Block Address out of Range W 11:17:54 Failed to Read Sector 7 - Logical Block Address out of Range W 11:17:54 Failed to Read Sector 8 - Logical Block Address out of Range W 11:17:54 Failed to Read Sector 9 - Logical Block Address out of Range W 11:17:54 Failed to Read Sector 10 - Logical Block Address out of Range W 11:17:55 Failed to Read Sector 11 - Logical Block Address out of Range W 11:17:55 Failed to Read Sector 12 - Logical Block Address out of Range W 11:17:55 Failed to Read Sector 13 - Logical Block Address out of Range W 11:17:55 Failed to Read Sector 14 - Logical Block Address out of Range W 11:17:55 Failed to Read Sector 15 - Logical Block Address out of Range W 11:17:55 Failed to Read Sector 16 - Logical Block Address out of Range W 11:17:56 Failed to Read Sector 17 - Logical Block Address out of Range W 11:17:56 Failed to Read Sector 18 - Logical Block Address out of Range W 11:17:56 Failed to Read Sector 19 - Logical Block Address out of Range W 11:17:56 Failed to Read Sector 20 - Logical Block Address out of Range W 11:17:56 Failed to Read Sector 21 - Logical Block Address out of Range E 11:17:57 Failed to Read Sector 22 - Logical Block Address out of Range E 11:17:57 Failed to Verify Sectors! I 11:17:57 Exporting Graph Data... I 11:17:57 Graph Data File: C:\Documents and Settings\swansons\Application Data\ImgBurn\IBG Files\Optiarc_DVD_RW_AD-7190S_1.01_MONDAY-FEBRUARY-18-2008_11-09_AM_TYG02_MAX.ibg I 11:17:57 Export Successfully Completed! E 11:17:57 Operation Failed! - Duration: 00:00:08 I 11:17:57 Average Verify Rate: 5 KB/s (0.0x) - Maximum Verify Rate: 8 KB/s (0.0x)
dontasciime Posted February 18, 2008 Posted February 18, 2008 try changing the sata cable I had a writer that all of a sudden came up with that error and I swapped it for a brand new one and it still did it so figured had to be cable or loose connection.
Recommended Posts