Jump to content

Recommended Posts

Posted

I have done many, many copies to DVD5 but recently have been trying to get a good DVD9 burn that will play in a standalone player with no success.

 

Sony DVD RW DW-Q30A (YYS2)

Verbatim DVD+R DL (MKM001)

 

ripped using DVDFab Decrypter

ISO created and layer break set using PgcEdit

burn by ImgBurn

-invoked directly from PgcEdit

-no warning messages in the log

-verify successful

scanned disc using KProbe2

-showed a very good burn

-PI max 33

-PIF max 5

 

DVD plays perfectly on 3 different PC's

DVD will not play in a standalone player. I have tried 4 different players (all different brands). 2 would not play the disc at all. 2 appeared to play but produced only a blank grey screen.

 

None of this points to ImgBurn as the problem but I would appreciate any help you might be able to provide.

Posted
I have done many, many copies to DVD5 but recently have been trying to get a good DVD9 burn that will play in a standalone player with no success.

 

None of this points to ImgBurn as the problem but I would appreciate any help you might be able to provide.

It is possible that the stand alone player you are using is not set up to play either + discs or at least + DL discs. You could try bit-setting to see if that would work but what you might want to try first is, if you are close by a Circuit City, Best Buy, etc. to take the disc with you and try it in some of the newer DVD players to see if it will work in any of them. If it does then you know the problem is with your player and not the disc.
Posted

I'm quite sure Movie Junkie is talking about bitsetting your burner not a standalone player. Did you change the booktype to DVD-Rom?

Posted

No not bit set the player, but the disc itself. Also perhaps the movie in question is PAL and not NTSC? just something to think about.

 

 

MYM

Posted
I'm quite sure Movie Junkie is talking about bitsetting your burner not a standalone player. Did you change the booktype to DVD-Rom?
That is just what I was talking about. I should have been clearer on that.
Posted
The book type is set to DVD-ROM for the +R media types.
Then it is possible that your standalone player do not like recordable media in general, + recordable media or at least DL recordable media.
Posted

The book type is set to DVD-ROM for the +R media types.

 

Did you also set the book type for DVD+R DL's ? They are different..........

 

Yes, the book type for DVD+R DL is DVD-ROM.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.