Cue Sheet Bug

converter · February 18, 2008

Hi,

I'm building an XP cd were I've incorporated SP2. So far everything went good but when I try to burn the ISO file I can't, After i Press "write" I get an error message that says "SendCueSheet Bug! followed by"CueSheeVariant: 13"

I don't know how to correct the problem since I don't know what creates it.

In Windows the file name says .iso but under type it says WinRAR. Does that have anyting to do with it? I think it shouldn't...

Any suggestions would be greatfully accepted.

**LIGHTNING UK!** · February 18, 2008

Post the log please.

Oh and you might want to download ImgBurn again from the 'Mirror 7 - ImgBurn.com' link. You might have downloaded a version that was only up for a matter of minutes before I put up a fixed one.

EDIT: Scrap that, I found the reason for the error. It still doesn't explain why the previous 12 attempts failed though! You must have a very old/picky drive or there's some other issue (which hopefully the log will show us).

converter · February 18, 2008

Here it is. But it doesn't really tell me anythin, hopefully you can make something out of it!

Burn_XPsp2.log

**LIGHTNING UK!** · February 18, 2008

Ok, there's no reason for that to be failing like it is. The image is as basic as it could possibly be.

Please give it one more go but this time, press F8 before you press the Start button to enable I/O debug mode.

Save that new log and upload it just as you did the last one. Thanks

converter · February 18, 2008

It didn't work this time either.

for some reason i corldn't upload the file so i just copied and pasted:

W 20:52:41 I/O Interface 'Debug Mode' has been Enabled!

I 20:52:41 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:41 CDB: 00 00 00 00 00 00

I 20:52:41 CDB Interpretation: Test Unit Ready

I 20:52:42 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:42 CDB: 00 00 00 00 00 00

I 20:52:42 CDB Interpretation: Test Unit Ready

I 20:52:43 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:43 CDB: 00 00 00 00 00 00

I 20:52:43 CDB Interpretation: Test Unit Ready

I 20:52:44 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:44 CDB: 00 00 00 00 00 00

I 20:52:44 CDB Interpretation: Test Unit Ready

I 20:52:45 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:45 CDB: 00 00 00 00 00 00

I 20:52:45 CDB Interpretation: Test Unit Ready

I 20:52:46 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:46 CDB: 00 00 00 00 00 00

I 20:52:46 CDB Interpretation: Test Unit Ready

I 20:52:47 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:47 CDB: 00 00 00 00 00 00

I 20:52:47 CDB Interpretation: Test Unit Ready

I 20:52:48 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:48 CDB: 00 00 00 00 00 00

I 20:52:48 CDB Interpretation: Test Unit Ready

I 20:52:49 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:49 CDB: 00 00 00 00 00 00

I 20:52:49 CDB Interpretation: Test Unit Ready

I 20:52:50 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:50 CDB: 00 00 00 00 00 00

I 20:52:50 CDB Interpretation: Test Unit Ready

I 20:52:51 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:51 CDB: 00 00 00 00 00 00

I 20:52:51 CDB Interpretation: Test Unit Ready

I 20:52:52 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:52 CDB: 00 00 00 00 00 00

I 20:52:52 CDB Interpretation: Test Unit Ready

I 20:52:53 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:53 CDB: 00 00 00 00 00 00

I 20:52:53 CDB Interpretation: Test Unit Ready

I 20:52:54 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:54 CDB: 00 00 00 00 00 00

I 20:52:54 CDB Interpretation: Test Unit Ready

I 20:52:55 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:55 CDB: 00 00 00 00 00 00

I 20:52:55 CDB Interpretation: Test Unit Ready

I 20:52:56 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:56 CDB: 00 00 00 00 00 00

I 20:52:56 CDB Interpretation: Test Unit Ready

I 20:52:57 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:57 CDB: 00 00 00 00 00 00

I 20:52:57 CDB Interpretation: Test Unit Ready

I 20:52:58 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:58 CDB: 00 00 00 00 00 00

I 20:52:58 CDB Interpretation: Test Unit Ready

I 20:52:59 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:52:59 CDB: 00 00 00 00 00 00

I 20:52:59 CDB Interpretation: Test Unit Ready

I 20:53:00 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:00 CDB: 00 00 00 00 00 00

I 20:53:00 CDB Interpretation: Test Unit Ready

I 20:53:01 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:01 CDB: 00 00 00 00 00 00

I 20:53:01 CDB Interpretation: Test Unit Ready

I 20:53:02 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:02 CDB: 00 00 00 00 00 00

I 20:53:02 CDB Interpretation: Test Unit Ready

I 20:53:03 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:03 CDB: 00 00 00 00 00 00

I 20:53:03 CDB Interpretation: Test Unit Ready

I 20:53:04 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:04 CDB: 00 00 00 00 00 00

I 20:53:04 CDB Interpretation: Test Unit Ready

I 20:53:05 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:05 CDB: 00 00 00 00 00 00

I 20:53:05 CDB Interpretation: Test Unit Ready

I 20:53:07 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:07 CDB: 00 00 00 00 00 00

I 20:53:07 CDB Interpretation: Test Unit Ready

I 20:53:08 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:08 CDB: 00 00 00 00 00 00

I 20:53:08 CDB Interpretation: Test Unit Ready

I 20:53:09 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:09 CDB: 00 00 00 00 00 00

I 20:53:09 CDB Interpretation: Test Unit Ready

I 20:53:10 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:10 CDB: 00 00 00 00 00 00

I 20:53:10 CDB Interpretation: Test Unit Ready

I 20:53:11 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:11 CDB: 00 00 00 00 00 00

I 20:53:11 CDB Interpretation: Test Unit Ready

I 20:53:12 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:12 CDB: 00 00 00 00 00 00

I 20:53:12 CDB Interpretation: Test Unit Ready

I 20:53:13 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:13 CDB: 00 00 00 00 00 00

I 20:53:13 CDB Interpretation: Test Unit Ready

I 20:53:14 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:14 CDB: 00 00 00 00 00 00

I 20:53:14 CDB Interpretation: Test Unit Ready

I 20:53:15 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:15 CDB: 00 00 00 00 00 00

I 20:53:15 CDB Interpretation: Test Unit Ready

I 20:53:16 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:16 CDB: 00 00 00 00 00 00

I 20:53:16 CDB Interpretation: Test Unit Ready

I 20:53:17 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:17 CDB: 00 00 00 00 00 00

I 20:53:17 CDB Interpretation: Test Unit Ready

I 20:53:18 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:18 CDB: 00 00 00 00 00 00

I 20:53:18 CDB Interpretation: Test Unit Ready

I 20:53:19 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:19 CDB: 00 00 00 00 00 00

I 20:53:19 CDB Interpretation: Test Unit Ready

I 20:53:20 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:20 CDB: 00 00 00 00 00 00

I 20:53:20 CDB Interpretation: Test Unit Ready

I 20:53:21 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:21 CDB: 00 00 00 00 00 00

I 20:53:21 CDB Interpretation: Test Unit Ready

I 20:53:22 [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:22 CDB: 00 00 00 00 00 00

I 20:53:22 CDB Interpretation: Test Unit Ready

W 20:53:23 I/O Interface 'Debug Mode' has been Disabled!

I 20:53:26 Operation Started!

I 20:53:26 Source File: C:\WINXPSP2.iso

I 20:53:26 Source File Sectors: 295 091 (MODE1/2048)

I 20:53:26 Source File Size: 604 346 368 bytes

I 20:53:26 Source File Volume Identifier: WINXPSP2

I 20:53:26 Source File Application Identifier: CDIMAGE 2.47 (10/12/2000 TM)

I 20:53:26 Source File File System(s): ISO9660 (Bootable)

I 20:53:26 Destination Device: [1:0:0] SONY DVD RW DW-U14A 1.0d (E:) (ATA)

I 20:53:26 Destination Media Type: CD-R (Disc ID: 97m15s17f) (Speeds: 4x; 12x; 16x; 20x; 24x)

I 20:53:26 Destination Media Sectors: 359 843

I 20:53:26 Write Mode: CD

I 20:53:26 Write Type: SAO

I 20:53:26 Write Speed: MAX

I 20:53:26 Test Mode: No

I 20:53:26 OPC: Yes

I 20:53:26 BURN-Proof: Enabled

E 20:53:39 Failed to send Cue Sheet!

E 20:53:40 Operation Failed! - Duration: 00:00:14

I 20:53:40 Average Write Rate: N/A - Maximum Write Rate: N/A

**LIGHTNING UK!** · February 18, 2008

You turned debug OFF before pressing start!

I need it ON

I don't expect it to work btw, I just want to get to the root of the problem.

converter · February 18, 2008

My bad... Found some errors and started looking around. But I still need the help:)

ImgBurn_log4.log

**LIGHTNING UK!** · February 18, 2008

Ok, you're in luck!

I've dug out my old (understatement!) Sony DRU-500AX and it has the same problem.

It wants a field set to value that's clearly invalid going by the MMC v2... v6 specs.

I'll implement a workaround ready for 2.4.1.0.

**dontasciime** · February 18, 2008

Thanks 4 the reminder and the fix.

**LIGHTNING UK!** · February 18, 2008

Sorted...

I 21:36:05 Destination Device: [0:0:0] SONY DVD RW DRU-500A 2.1a (J:) (USB)
I 21:36:05 Destination Media Type: CD-RW (Disc ID: 97m17s00f) (Speeds: 4x)

I 21:36:05 Destination Media Sectors: 359,847

I 21:36:05 Write Mode: CD

I 21:36:05 Write Type: SAO

I 21:36:05 Write Speed: MAX

I 21:36:05 Test Mode: No

I 21:36:05 OPC: Yes

I 21:36:06 BURN-Proof: Enabled

I 21:39:05 Filling Buffer... (40 MB)

I 21:39:05 Writing LeadIn...

I 21:39:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 9624)

I 21:39:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 9624)

I 21:40:14 Synchronising Cache...

**dontasciime** · February 18, 2008

which enclosure you got that in, or is it not a pretty sight ?

**LIGHTNING UK!** · February 18, 2008

Just some super old firewire/usb thing from svp with and extended power cable and normal akasa rounded ide cable on it - to aid with quick removal. Obviously there's no lid - the IDE cable wouldn't fit.

The long pause before filling buffer was me in the debugger btw.

**dontasciime** · February 18, 2008

The long pause before filling buffer was me in the debugger btw.

The 3 minutes was not what prompted the question about enclosure it was because of the Sony draw/tray as I ain't got an enclosure it will fit in

You should have also seen me trying to fit that Sony drive and come to think of it a Pioneer A07_XLB to one of my Chenbro Gaming Bomb cases. It was like watching a 2 year old trying to fit the triangle into the circle and looking for the hammer.

DJShopper.net · February 29, 2008

I Have the same send cue sheet bug "Cue Sheet Bug Variant 13" using a Sony DRU 510A CD/DVD burner on a Vista system.

In case it is of any use I have attached the debug file. Have you any idea when the workaround fix will be available?

Kind regards

Mike Simpson

Ok, you're in luck!

I've dug out my old (understatement!) Sony DRU-500AX and it has the same problem.

It wants a field set to value that's clearly invalid going by the MMC v2... v6 specs.

I'll implement a workaround ready for 2.4.1.0.

ImgBurnLog_080229_1139.log

Cue Sheet Bug

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Important Information