JasonFriday13 Posted February 27, 2008 Posted February 27, 2008 I decided to create a coaster of one of my DVD+Rs to see if my drive will burn at 20x like the box says, which it did. I turned on exporting of graph data so I could show you the results. This is where the problem lies. Using discovery mode, after burning and verify, I expected two graph files, one for the burn, and one for the verify. But I only found one file. The log confirms that the burn graph was overwritten by the verify graph, and the last modified date on the file was 8:09 pm (same time shown in the log). Of course, I have attached my log: I 19:58:05 ImgBurn Version 2.4.0.0 started! I 19:58:05 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 19:58:05 Total Physical Memory: 1,048,044 KB - Available: 624,252 KB I 19:58:05 Initialising SPTI... I 19:58:05 Searching for SCSI / ATAPI devices... I 19:58:05 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 19:58:29 Operation Started! I 19:58:29 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 19:58:29 Source File Sectors: 2,295,104 (MODE1/2048) I 19:58:29 Source File Size: 4,700,372,992 bytes I 19:58:29 Source File Volume Identifier: DISCOVERY_IMAGE I 19:58:29 Source File File System(s): None I 19:58:29 Destination Device: [3:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.05 (D:) (ATA) I 19:58:29 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 8x, 12x, 16x, 18x, 20x) I 19:58:29 Destination Media Sectors: 2,295,104 I 19:58:29 Write Mode: DVD I 19:58:29 Write Type: DAO I 19:58:29 Write Speed: MAX I 19:58:29 Link Size: Auto I 19:58:29 Test Mode: No I 19:58:29 OPC: Yes I 19:58:29 BURN-Proof: Enabled I 19:58:29 Book Type Setting: DVD-ROM I 19:58:36 Filling Buffer... (40 MB) I 19:58:36 Writing LeadIn... I 19:59:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 2295103) I 19:59:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2295103) I 20:03:13 Synchronising Cache... I 20:03:29 Closing Track... I 20:03:30 Finalising Disc... I 20:03:38 Exporting Graph Data... I 20:03:38 Graph Data File: C:\Program Files\ImgBurn\HL-DT-ST_DVD-RAM_GSA-H55L_1.05_WEDNESDAY-27-FEBRUARY-2008_7-58_p.m._MCC-004-00_MAX.ibg I 20:03:38 Export Successfully Completed! I 20:03:38 Operation Successfully Completed! - Duration: 00:05:09 I 20:03:38 Average Write Rate: 19,046 KB/s (13.8x) - Maximum Write Rate: 27,951 KB/s (20.2x) I 20:03:38 Cycling Tray before Verify... W 20:03:50 Waiting for device to become ready... I 20:04:08 Device Ready! I 20:04:08 Operation Started! I 20:04:08 Source Device: [3:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.05 (D:) (ATA) I 20:04:08 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-004-00) (Speeds: 4x, 8x, 12x, 16x, 18x, 20x) I 20:04:08 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 20:04:08 Image File Sectors: 2,295,104 (MODE1/2048) I 20:04:08 Image File Size: 4,700,372,992 bytes I 20:04:08 Image File Volume Identifier: DISCOVERY_IMAGE I 20:04:08 Image File File System(s): None I 20:04:08 Read Speed (Data/Audio): MAX / MAX I 20:04:08 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2295103) I 20:04:08 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2295103) I 20:09:10 Exporting Graph Data... I 20:09:10 Graph Data File: C:\Program Files\ImgBurn\HL-DT-ST_DVD-RAM_GSA-H55L_1.05_WEDNESDAY-27-FEBRUARY-2008_7-58_p.m._MCC-004-00_MAX.ibg I 20:09:10 Export Successfully Completed! I 20:09:10 Operation Successfully Completed! - Duration: 00:05:02 I 20:09:10 Average Verify Rate: 15,199 KB/s (11.0x) - Maximum Verify Rate: 22,298 KB/s (16.1x) And I have attached the graph file in question (will probably be the verify graph): HL_DT_ST_DVD_RAM_GSA_H55L_1.05_WEDNESDAY_27_FEBRUARY_2008_7_58_p.m._MCC_004_00_MAX.ibg
cornholio7 Posted February 27, 2008 Posted February 27, 2008 both the burn and the verify are shown in your graph jason, the yellow is the write and the light blue the verify, this is normal if you want two separate just click on either verify on dvdip or write
JasonFriday13 Posted February 27, 2008 Author Posted February 27, 2008 That's normal?! I was busy panicking because I thought I had overwritten my burn graph with the verify graph. I don't have DVDinfo Pro so I had no idea that both graphs had merged. Thanks corny.
JasonFriday13 Posted February 27, 2008 Author Posted February 27, 2008 Just a small suggestion now, if you export to the same file again, maybe the log could show something like "Graph export merged successfully!". Anyway, I would have posted this in Imgburn general if I didn't have this misunderstanding.
mmalves Posted February 27, 2008 Posted February 27, 2008 Anyway, I would have posted this in Imgburn general if I didn't have this misunderstanding.
LIGHTNING UK! Posted February 27, 2008 Posted February 27, 2008 Technically it's not merging them. The file is not opened/read/added to/written back, it's simply overwritten by the new set of graph data that contains info from the entire process - i.e. Write and Verify - where it's all held in memory.
Recommended Posts