krash Posted February 28, 2008 Posted February 28, 2008 I was burning an ISO image to a cd but ImgBurn showed the cd Free Spaceas 512,655,360 bytes and Time as 55 something and the program said there was not enough room for the image. I told it to burn anyway and when it was done burning it's was fine and showed the infor below plus the next cd I put in displayed just fine as well. Was just wondering if this was my system or the program? Running Vista with SP1. TSSTcorp CD/DVDW TS-H652M 0414 (ATA) Current Profile: CD-R Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 337,960 Size: 692,142,080 bytes Time: 75:08:10 (MM:SS:FF) TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 337959) -> LeadOut (LBA: 337960)
LIGHTNING UK! Posted February 28, 2008 Posted February 28, 2008 It's just your drive not recognising / initialising the disc properly. See if there are any firmware updates available for it. If it's reporting the wrong size and you know for a fact that they're 80 min CD's etc, there should be no problem with burning them to that extent. It'll either work or error out - in your case it seems to work. Just make sure you enable the 'Verify' option to check everything is present and correct.
LOCOENG Posted February 29, 2008 Posted February 29, 2008 Here is a thread about your drive...apparently the 0414 firmware isn't the best. http://club.cdfreaks.com/f105/tsstcorp-ts-...h-s182m-223718/
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now