CaseyRoe Posted March 14, 2008 Share Posted March 14, 2008 Hi, please could someone help me! I am going stir crazy! I have to copy a load of sensitive data to dvd, and normally I have used Nero to do the job but it failed and another forum said that if I burned the image then used the wonderful imgburn to copy the img it would be ok. However, this fails too! The burner I am using has the most up to date drivers and the disks whilst not brilliant (Infiniti Professional DVD+R DL) have always worked before. The error file is below: ; //****************************************\\ ; ImgBurn Version 2.4.0.0 - Log ; Wednesday, 12 March 2008, 18:09:22 ; \\****************************************// ; ; I 17:45:39 ImgBurn Version 2.4.0.0 started! I 17:45:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 17:45:39 Total Physical Memory: 2,096,300 KB - Available: 1,549,192 KB I 17:45:47 Initialising SPTI... I 17:45:47 Searching for SCSI / ATAPI devices... I 17:45:47 Found 2 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 14, 2008 Share Posted March 14, 2008 Just click 'Ignore' / 'Continue' when it pops up. If you want it off forever, click Tools -> Settings -> Write tab -> Perform OPC Before Write. You might want to slow the burn speed down a bit if MAX (i.e. 8x) doesn't work. Also, check for firmware updates incase there are any. Link to comment Share on other sites More sharing options...
CaseyRoe Posted March 14, 2008 Author Share Posted March 14, 2008 Just click 'Ignore' / 'Continue' when it pops up. If you want it off forever, click Tools -> Settings -> Write tab -> Perform OPC Before Write. You might want to slow the burn speed down a bit if MAX (i.e. 8x) doesn't work. Also, check for firmware updates incase there are any. Thanks I will try that and pray that this time it works! Thanks for you time and help again. Link to comment Share on other sites More sharing options...
Recommended Posts