omgwtfbbq Posted March 16, 2008 Posted March 16, 2008 So I'm trying to put some DVD images onto some dual layer dvd's. Got me a new burner (old one wasnt detecting and form of disks (even verbatum). For these 2 logs I'm using TDK dual layer DVD+R dual layers, but i have tried verbatums. Log 1 I 15:49:32 ImgBurn Version 2.4.0.0 started! I 15:49:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:49:32 Total Physical Memory: 3,144,108 KB - Available: 2,375,896 KB I 15:49:34 Initialising SPTI... I 15:49:34 Searching for SCSI / ATAPI devices... I 15:49:44 Found 1 DVD-ROM and 1 DVD
LIGHTNING UK! Posted March 16, 2008 Posted March 16, 2008 You've got DMA issues. Change the cable going to the drive and make sure it's as short as possible - avoid connecting it to a jmicron controller if you can. Set the drive as master / slave, don't use cable select. Follow the DMA post in the FAQ to uninstall the IDE controller from device manager and reboot.
blutach Posted March 16, 2008 Posted March 16, 2008 I 15:55:54 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D02-00) (Speeds: 4x, 6x, 8x) You also have media issues. Change to Verbatims 2.4X, MKM-001s, Made in Singapore. Regards
Recommended Posts