juandan Posted March 23, 2008 Posted March 23, 2008 Hi, I got this error when trying burn a ISO image file, optimum power calibration failed reason no additional sence information here is the log thanks ; //****************************************\\ ; ImgBurn Version 2.4.0.0 - Log ; Sunday, 23 March 2008, 12:05:01 ; \\****************************************// ; ; I 12:01:21 ImgBurn Version 2.4.0.0 started! I 12:01:21 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 12:01:21 Total Physical Memory: 2,030,812 KB - Available: 1,437,996 KB I 12:01:21 Initialising SPTI... I 12:01:21 Searching for SCSI / ATAPI devices... I 12:01:22 Found 1 DVD-ROM and 1 DVD
Kenadjian Jr Posted March 23, 2008 Posted March 23, 2008 I think that the "Optimum Power Calibration Failed" is caused by shit disks but u have MCC which r A+++ try and burn at 4X rather then MAX and c if that changes anything
dontasciime Posted March 23, 2008 Posted March 23, 2008 Is the drive new ? Did it come with SB03 firmware or have you updated firmware ? If you updated firmware where did you get the firmware update from ? [edit forget about this bit as samsung odd have that firmware, Rpc1 still show SB02 for L version but SB03 for A version] Check out the FAQ about DMA issues as well maybe set master on a new 80 wire IDE cable. You could also untick Perform OPC Before Write in settings under write tab
juandan Posted March 24, 2008 Author Posted March 24, 2008 (edited) Is the drive new ? Did it come with SB03 firmware or have you updated firmware ? If you updated firmware where did you get the firmware update from ? [edit forget about this bit as samsung odd have that firmware, Rpc1 still show SB02 for L version but SB03 for A version] Check out the FAQ about DMA issues as well maybe set master on a new 80 wire IDE cable. You could also untick Perform OPC Before Write in settings under write tab I noticed on destination it had the right name of the dvd-rw drive but not the right letter, its got (E) it should be (D) E is my dvd-rom drive, Edited March 24, 2008 by juandan
juandan Posted March 24, 2008 Author Posted March 24, 2008 Is the drive new ? Did it come with SB03 firmware or have you updated firmware ? If you updated firmware where did you get the firmware update from ? [edit forget about this bit as samsung odd have that firmware, Rpc1 still show SB02 for L version but SB03 for A version] Check out the FAQ about DMA issues as well maybe set master on a new 80 wire IDE cable. You could also untick Perform OPC Before Write in settings under write tab I noticed on destination it had the right name of the dvd-rw drive but not the right letter, its got (E) it should be (D) E is my dvd-rom drive,
LIGHTNING UK! Posted March 24, 2008 Posted March 24, 2008 Your log clearly shows the burner with the 'D:' drive letter. I 09:31:35 Source Device: [0:0:0] TSSTcorp CD/DVDW SH-S183L SB03 (D:) (ATA)
LIGHTNING UK! Posted March 24, 2008 Posted March 24, 2008 Then you must have done something to make windows change the letters (uninstalled the IDE controller perhaps?) because if that pic is newer than the logs, your burner is now E:.
juandan Posted March 24, 2008 Author Posted March 24, 2008 I don't no whats going on all the optical drives have changed places, I just burned a video in nero no problem hear is snap shop of my computer [/img]
juandan Posted March 24, 2008 Author Posted March 24, 2008 I think the problem started when I was trying open an powerISO file I didn't no what I was doing so I clicked on mount and had the image mount in the f drive I could view all the powerISO files from there, I unmounted it so there's nothing in f drive now, but the dvd-rw still has the letter E and dvd-rom has D does it make any difference what letter it has?
LIGHTNING UK! Posted March 24, 2008 Posted March 24, 2008 Nope, none at all. Just so long as you know which is which when looking in Explorer / My Computer. Have you actually turned off the 'Perform OPC Before Write' option in the settings now as suggest earlier?
juandan Posted March 24, 2008 Author Posted March 24, 2008 Nope, none at all. Just so long as you know which is which when looking in Explorer / My Computer. Have you actually turned off the 'Perform OPC Before Write' option in the settings now as suggest earlier? I did as you suggested and I just burned the disk successfully thanks for your time and help and top man yourself, and to all for your help
Recommended Posts