Sliztzan Posted March 29, 2008 Posted March 29, 2008 (edited) I have the settings to split into 1GB sections when reading the DVD, but it makes a complete single file image. DVD Decrypter works ok. eg I01, I02, etc. Is there a setting I'm not seeing? thanks Edit: Ok I see the issue. This is a mounted image. It works from a physical DVD. Is there a work around? Edited March 29, 2008 by Sliztzan
LIGHTNING UK! Posted March 29, 2008 Posted March 29, 2008 Did you change the one on the Build tab instead of the Read tab by any chance? EDIT: Is the virtual drive showing as a CD-ROM?
Sliztzan Posted March 29, 2008 Author Posted March 29, 2008 (edited) No, I didn't change the one in the build tab, though I did try that one too just for grins and giggles. Edit: Yes all my DVD Drives show as CD Drive under the category 'Type' in My Computer The drive is Virtual CloneDrive Edited March 29, 2008 by Sliztzan
LIGHTNING UK! Posted March 29, 2008 Posted March 29, 2008 Sorry, I meant media wise. Post the log of the read. Splitting works fine for me from both a real drive and a virtual one. If the virtual drive reports the very large media as being a cd type disc then that's why splitting is failing. Splitting is always disabled for CD images.
Sliztzan Posted March 29, 2008 Author Posted March 29, 2008 I 14:37:06 ImgBurn Version 2.4.0.0 started! I 14:37:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 14:37:06 Total Physical Memory: 3,143,404 KB - Available: 2,423,312 KB I 14:37:06 Initialising SPTI... I 14:37:06 Searching for SCSI / ATAPI devices... I 14:37:06 Found 1 DVD-ROM, 1 DVD
LIGHTNING UK! Posted March 29, 2008 Posted March 29, 2008 I 14:37:30 Source Media Type: CD-ROM Elby should make it so images >= 1GB are emulated as DVD's in the same way DAEMON Tools does it.
Sliztzan Posted March 29, 2008 Author Posted March 29, 2008 I just switched to Elby yesterday. I'll try Daemon again.
Sliztzan Posted March 29, 2008 Author Posted March 29, 2008 It works ok with Daemon Tools. I just didn't need all of the emulation stuff with Daemon. Was hoping just to have a virtual drive mounter. Fyi, I tried reinstalling Elbys and it still didn't work. So I'll just stick with Daemon.
Cynthia Posted March 29, 2008 Posted March 29, 2008 Curious. Is it an old version you have installed? I 14:37:30 Source Device: [4:0:0] ELBY CLONEDRIVE 1.1 (J:) (SCSI) Virtual Clone Drive v5.2.0.2.
blutach Posted March 29, 2008 Posted March 29, 2008 And you can turn all the emulation off with DT and run just as a virtual drive. Regards
Sliztzan Posted March 30, 2008 Author Posted March 30, 2008 (edited) Curious. Is it an old version you have installed? I 14:37:30 Source Device: [4:0:0] ELBY CLONEDRIVE 1.1 (J:) (SCSI) Virtual Clone Drive v5.2.0.2. It's from Virtual Clone Drive v5.2.0.2. Different link but same file. I also noticed that ImgBurn pick up the actual drive name even though in Windows Explorer shows the Volume Label of the DVD in the drive. Edited March 30, 2008 by Sliztzan
Recommended Posts