omgwtfbbq Posted April 2, 2008 Share Posted April 2, 2008 (edited) Yet another problem, Burning a .MDS to a disk and E 21:34:15 Optimal L1 Data Zone Start LBA: None Found! (VTS_01) pops up, tried it with both drives, same stuff pops up. And the DL DvD's I'm using have worked on IB before (may get verbatums after i burn through these 20 odd DL DvD's I have left). Here be the log: I 21:33:52 ImgBurn Version 2.4.1.0 started! I 21:33:52 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 21:33:52 Total Physical Memory: 2,095,760 KB - Available: 1,539,956 KB I 21:33:52 Initialising SPTI... I 21:33:52 Searching for SCSI / ATAPI devices... I 21:33:54 Found 2 DVD Edited April 2, 2008 by omgwtfbbq Link to comment Share on other sites More sharing options...
mmalves Posted April 2, 2008 Share Posted April 2, 2008 That image was incorrectly authored. Have you by any chance used DVD Shrink to create it? Even if you didn't, try this: use Daemon Tools (or similar) to mount that image to a virtual drive then follow this guide (use the VIDEO_TS folder that's inside the virtual drive as the source). Link to comment Share on other sites More sharing options...
omgwtfbbq Posted April 2, 2008 Author Share Posted April 2, 2008 (edited) I used IMG Burn to make it along w/ Any DVD. Also it put out both a .ISO and .MDF so should I put both files in the VIDEO_TS folder? Edited April 2, 2008 by omgwtfbbq Link to comment Share on other sites More sharing options...
mmalves Posted April 2, 2008 Share Posted April 2, 2008 If I recall correctly AnyDVD used to remove the layer break information (don't ask me why because I don't know ), so that's probably why you're getting that message. Please read again my post above: when you mount that image to a virtual drive, it'll act like just like a real drive from which you'll be able to add its VIDEO_TS folder to ImgBurn, pick a layer break and then burn your disc Link to comment Share on other sites More sharing options...
blutach Posted April 2, 2008 Share Posted April 2, 2008 I 21:34:08 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D02-00) (Speeds: 4x, 6x, 8x) And, as you have observed, you should get rid of this junk and get some Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore. I doubt AnyDVD would kill the info in the MDS. Something's NQR. Regards Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 2, 2008 Share Posted April 2, 2008 PTP source probably. Rebuild it. Link to comment Share on other sites More sharing options...
omgwtfbbq Posted April 2, 2008 Author Share Posted April 2, 2008 Actually using a virtual driv fixed the problems. Didn't use Daemon Tools since I've heard its riddled w/ viruses so i got Virtual Clone Drive. Worked perfectly. Thanks for the help Mmalves. And the TDK DL DVD+R disks really aren't that bad, got 25 for $10 (I get a discount at Bestbuy. Link to comment Share on other sites More sharing options...
blutach Posted April 2, 2008 Share Posted April 2, 2008 Where'd you hear that? It is not riddled with anything!!! It works very well and is totally free! It does offer some google bar on installation, but just say no. Regards Link to comment Share on other sites More sharing options...
Recommended Posts