slothman Posted April 5, 2008 Posted April 5, 2008 Hello, I have stumbled upon some weirdness in imgburn's cuesheet stuffs. When I try to burn a cuesheet that was generated from imgburn using the read mode, it acts real funky. I'd attach a log, but there's no info that would be of any use. I even tried regmon and filemon on it, still can't see any file it's complaining about. Basically the error that comes up says this: Cannot open file: Reason: The system cannot find the path specified. Retry Cancel Well looking at that I just realized it is looking for a path, but I'm sure that would've come up somehow as well. I'm fairly certain this is not intended program behavior.
blutach Posted April 5, 2008 Posted April 5, 2008 Irrespective of what you think, please post a log. Help --> ImgBurn logs Regards
LIGHTNING UK! Posted April 5, 2008 Posted April 5, 2008 Posting a copy of the cuesheet would help too.
slothman Posted April 5, 2008 Author Posted April 5, 2008 Ok, here's a copy of the log: ; //****************************************\\ ; ImgBurn Version 2.4.1.0 - Log ; Saturday, 05 April 2008, 14:03:07 ; \\****************************************// ; ; I 14:02:41 ImgBurn Version 2.4.1.0 started! I 14:02:41 Microsoft Windows 2000 Professional (5.0, Build 2195 : Service Pack 4) I 14:02:41 Total Physical Memory: 490,852 KB - Available: 333,120 KB I 14:02:41 Initialising SPTI... I 14:02:41 Searching for SCSI / ATAPI devices... I 14:02:41 Found 1 DVD
LIGHTNING UK! Posted April 6, 2008 Posted April 6, 2008 Ok now I need all the info from the panel on the right when you're in Read mode and that problem source disc is in the drive.
slothman Posted April 8, 2008 Author Posted April 8, 2008 Ok Lightning UK, i got the 411 for you LITE-ON DVDRW SOHW-1673S JS0D (ATA) Current Profile: CD-R Disc Information: Status: Complete Erasable: No Sessions: 2 Sectors: 300,186 Size: 614,780,928 bytes Time: 66:44:36 (MM:SS:FF) TOC Information: Session 1... -> Track 01 (Mode 2, Form 1, LBA: 0 - 253574) -> LeadOut (LBA: 253575) Session 2... -> Track 02 (Mode 1, LBA: 260850 - 300185) -> LeadOut (LBA: 300186) Track Information: Session 1... -> Track 01 (LTSA: 0, TS: 253573, LRA: 253572) Session 2... -> Track 02 (LTSA: 264975, TS: 35209, LRA: 300183) ATIP Information: Start Time of LeadIn (MID): 97m24s01f Last Possible Start Time of LeadOut: 79m59s72f Btw just fyi: This was a multisession disc created with cdrtfe 1.3 I haven't been able to copy this disc with anything except for commercial cd burning progs like nero/clonecd/alcohol. I have spent many long hours trying to figure out why it is not possible.
blutach Posted April 8, 2008 Posted April 8, 2008 TRACK 02 MODE1/2352 Shouldn't this be mode 2? Regards
slothman Posted April 8, 2008 Author Posted April 8, 2008 TRACK 02 MODE1/2352 Shouldn't this be mode 2? Regards Yes probably, but I didn't have much of a hand in that, talk to cdrtfe about it. I simply selected the correct options to make a multisession disc and that's the mode it selected. The disc is properly recognized in windows though, even though isobuster can't see any of the files on the second session (very strange).
blutach Posted April 8, 2008 Posted April 8, 2008 Maybe try to burn it again, but change the cuesheet. Regards
slothman Posted April 8, 2008 Author Posted April 8, 2008 Maybe try to burn it again, but change the cuesheet. Regards Well I have done that and much much more. No go. As I've said, it's basically impossible to try to copy this cd I've created with free or open source tools. I've also created multisession cd's with infrarecorder which does properly set the mode, but the same problem. No way to copy. I think I may have a way to do it though, there's a program which creates images which have "weak sectors", basically unreadable sectors. I'm sure it would be a simple matter to take the unreadable sectors which are marked by isobuster and turn them into weak sectors. That *may* produce a correct copy. Still can't believe I have to do all this to copy a multisession cd though
LIGHTNING UK! Posted April 8, 2008 Posted April 8, 2008 The cue sheet:FILE "Image.bin" BINARY REM SESSION 01 TRACK 01 MODE2/2352 INDEX 01 00:00:00 POSTGAP 00:00:02 REM LEAD-OUT 56:21:00 REM SESSION 02 TRACK 02 MODE1/2352 INDEX 00 58:52:73 INDEX 01 57:58:00 I expect these are what's causing the problem. Index 0 coming after Index 1, but I'm not really sure why! I even tried recreating the disc and reading it back but I still didn't get an index 0. I can try some other stuff now I have the disc info. If windows can see all the files on the disc I'd probably just use Build mode, point it at the disc and have it create a new image.
LIGHTNING UK! Posted April 8, 2008 Posted April 8, 2008 Ah ok, I've had a closer look now... TOC Information:Session 1... -> Track 01 (Mode 2, Form 1, LBA: 0 - 253574) -> LeadOut (LBA: 253575) Session 2... -> Track 02 (Mode 1, LBA: 260850 - 300185) -> LeadOut (LBA: 300186) Track Information: Session 1... -> Track 01 (LTSA: 0, TS: 253573, LRA: 253572) Session 2... -> Track 02 (LTSA: 264975, TS: 35209, LRA: 300183) The two numbers in bold should be the same. Do you have any other drives you could try and read that disc in? (because it looks like a firmware bug - either in writing or in reading) I really just need to see the same 'Disc Information' as you posted last time.
slothman Posted April 9, 2008 Author Posted April 9, 2008 Doh! It was a problem on my end. I just tried another drive on another computer, and it read the cd and wrote another copy fine. But the copy of the cd was wack. But I guess that's ok, at least imgburn tried to make a copy. Which is much better than the result on this computer. I also took the drive from this computer and tried it on the other computer. No problems again. So that means this computer itself has some kind of issue. Really sorry to bother you with a problem that only existed in my machine.
LIGHTNING UK! Posted April 9, 2008 Posted April 9, 2008 I've worked around it anyway incase it happens again sometime.
Recommended Posts