MaxPayne Posted April 16, 2008 Posted April 16, 2008 Greetings, i have found a reproducible error while veryfing Verbatim +r dual layer disk, burned both with Plextor 760a drive and Pioneer A08 I burn the disks with clone cd and when i verify them using ImgBurn, the verify always fail at the layer break ( always 51% of the verification process,, when the layer break occur) I verify them comparing the hard disk Iso to the disk, inserted into a DVD-rom pioneer drive, or LG DVD-rom drive ( i don't verify from the same burner usually,, to 'save' the drive mechanism ) All this doesn't happen in the previous version 2.3.2, it only happen on 2.4 and later If i verify the Iso to the disk inserted into the same dvd-recorder i burned the disk.. the verification process is fine But anyway.. ImgBurn doesn't verify correctly anymore the iso to the disk inserted into any DVD-rom drive ( while version 2.3.2 did it perfectly ) There is some kind of bug in the layer break switch or something in my opinion Best Regards, Alex
LIGHTNING UK! Posted April 16, 2008 Posted April 16, 2008 If you've got a problem, post the log. I've done a few DL burns today and they've all written / verified perfectly.
MaxPayne Posted April 17, 2008 Author Posted April 17, 2008 Hi, yes i will post all the logs, no problem As i said, if i verify the hard disk iso to the disk inserted into the same dvd recorder i used for burning that disk, verification process will be fine If i test the same Hard disk iso to the same disk, but inserted into a Pioneer DVDrom reader, or LG dvdrom reader,, verification fail at 51% ( layerbreak ) It doesn't happen with version 2.3.2, only in 2.4 and later Tomorrow i'll post the logs
LIGHTNING UK! Posted April 17, 2008 Posted April 17, 2008 No offence, but I very much doubt this is happening as you say it is. I couldn't make that happen even if I wanted to. The drive is in complete control of the burning so the software version used makes no difference. All I do is provide it with data.
MaxPayne Posted April 20, 2008 Author Posted April 20, 2008 Hi, i will post my logs, sorry i couln't do it before It may be a problem related only to my computers, who knows Anyway it doesn't happen with 2.3.2, only happen with 2.4 Also, it doesn't happen if i verify from the same dvd-recorder i burned the disk with, only happen when i test it from my DVD-rom Pioneer or LG to the iso image The computer i'm doing the test with is a old Pentium 4 with Intel 845PE chipset motherboard wich i use mostly to burn disks,latest intel chipset drivers used, Xp professional SP2 I'll post the logs today, just a bit patience
Recommended Posts