Lunki Posted May 28, 2008 Posted May 28, 2008 (edited) I had problem with -R DL while ago and now accepted that this drive doesnt even support it. But now I got some Verbatim +R DL (made in singapore) and they only seem to come up as normal +R HL-DT-ST DVD-RAM GSA-H20L 1.02 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2 228 225 Free Space: 4 563 404 800 bytes Free Time: 495:11:50 (MM:SS:FF) Supported Write Speeds: 2,4x Physical Format Information (Last Recorded): Book Type: DVD-ROM Part Version: 0 Disc Size: 120mm Maximum Read Rate: 2.52Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 0 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 Theres the disc info, shows size only as 4gb~ but write speed still is 2.4x for the DL. So wonder if there is something I'm missing and could be fixed? =============================================== Filter Driver Load Order - ImgBurn v2.4.1.0 =============================================== Upper Device Filter: redbook Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: [None Found] Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\System32\DRIVERS\redbook.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: Redbook Audio Filter Driver Product Name: Microsoft Edited May 28, 2008 by Lunki
dontasciime Posted May 28, 2008 Posted May 28, 2008 whats the reorder code on tub of 10, 25 etc Or switch to write mode and put another one in drive and paste info from right pane
LIGHTNING UK! Posted May 28, 2008 Posted May 28, 2008 Did you buy the 8x verbatims? You might be better off with the 2.4x ones. At the moment the drive doesn't appear to be initialising them properly - meaning it doesn't fully support them. I certainly wouldn't try burning to them.
Lunki Posted May 28, 2008 Author Posted May 28, 2008 (edited) And yes, these are pure 2.4x verbatims Write mode has samething, tried swapping blanks also HL-DT-ST DVD-RAM GSA-H20L 1.02 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2 228 225 Free Space: 4 563 404 800 bytes Free Time: 495:11:50 (MM:SS:FF) Supported Write Speeds: 2,4x Physical Format Information (Last Recorded): Book Type: DVD-ROM Part Version: 0 Disc Size: 120mm Maximum Read Rate: 2.52Mbps Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 0 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 Also I had this same thing few months ago, but then I had shitty media so burn failed. I 14:24:25 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H20L 1.02 (D:) (ATA) I 14:24:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 4x) So driver does support this media. Edited May 28, 2008 by Lunki
dontasciime Posted May 28, 2008 Posted May 28, 2008 I 14:24:25 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H20L 1.02 (D:) (ATA)I 14:24:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 4x) Those are Ritek and LUK meant your drive does not support / or even recognise 8x Verbatim MKM-003-00
dontasciime Posted May 28, 2008 Posted May 28, 2008 Although DVD+R9 supported media types: 22 ------------------------------------------ CMC MAG D01 4x,2.4x CMC MAG D03 8x,4x,2.4x CMC MAG D04 4x,2.4x DEFAULT1 6 4x,2.4x DEFAULT2 P4 2.4x DEFAULT4 4x,2.4x DEFAULT6 4x,2.4x DEFAULT8 4x,2.4x INFOME D01 2.4x KIC00000 D20 2.4x MBIPG101 R10 4x,2.4x MKM 001 6x,4x,2.4x MKM 002 4x,2.4x MKM 003 8x,4x,2.4x PHILIPS CD2 4x,2.4x PHILIPS PD2 2.4x PRODISC D01 4x,2.4x RICOHJPN D00 2.4x RICOHJPN D01 8x,4x,2.4x RICOHJPN D01 8x,4x,2.4x RITEK D01 4x,2.4x RITEK S04 4x,2.4x Is listed in firmware
dontasciime Posted May 28, 2008 Posted May 28, 2008 Have you flashed the drive recently. Maybe try flashing again with 1.02 if it allows you to
Lunki Posted May 28, 2008 Author Posted May 28, 2008 This is what I'm wondering, since now it sees those RITEK ones too as normal +R. Going to try flashing again later and see if that helps.
Lunki Posted May 29, 2008 Author Posted May 29, 2008 Flashed the drive again now, still same problem.
dontasciime Posted May 29, 2008 Posted May 29, 2008 disable alcohol 120 or anything similar. Then test drive in anther computer before returning it as faulty
Recommended Posts