alawck Posted June 10, 2008 Share Posted June 10, 2008 This is my first time to use Imgburn to burn DVD. When I started all procedures, burning did not start. And it came out an error message as below: Failed to set L0 Data Zone Capacity. Reason: Unknown (Internal Target Failure) (0x44,0x45) How can I solve this problem? Thanks. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 10, 2008 Share Posted June 10, 2008 Please post the log. Link to comment Share on other sites More sharing options...
alawck Posted June 10, 2008 Author Share Posted June 10, 2008 Hi, below is the log of the failure. Thanks ; //****************************************\\ ; ImgBurn Version 2.4.1.0 - Log ; Tuesday, 10 June 2008, 21:41:56 ; \\****************************************// ; ; I 20:51:14 ImgBurn Version 2.4.1.0 started! I 20:51:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 20:51:14 Total Physical Memory: 1,965,484 KB - Available: 1,421,748 KB I 20:51:14 Initialising SPTI... I 20:51:14 Searching for SCSI / ATAPI devices... I 20:51:14 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 10, 2008 Share Posted June 10, 2008 Update your drives firmware and try again. http://wwwbsc.pioneer.co.jp/cgi-bin/www1/d...109_FW158EU.EXE Link to comment Share on other sites More sharing options...
alawck Posted June 10, 2008 Author Share Posted June 10, 2008 Hi LIGHTNING UK. Thanks for your advise. I can burn the DL disk successfully now. Link to comment Share on other sites More sharing options...
Recommended Posts