mima Posted June 19, 2008 Share Posted June 19, 2008 If I get an error message and try to cancel the program, it will not close. If I hit "cancel" a second time, it tells me to "be patient" but after waiting. literally, hours, it still wont close. I have to re-boot my computer to make it let go. Is there something I can do? Many thanks for any help.... Link to comment Share on other sites More sharing options...
dontasciime Posted June 19, 2008 Share Posted June 19, 2008 List your hardware, post a log, post filter driver load order as well Look at imgburn help menu for logs and tools for filter driver Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 19, 2008 Share Posted June 19, 2008 That means the drive is probably still busy processing a command. ImgBurn isn't in control at this point, hence you can't quit. What you need to figure out is why your drive / machine is getting stuck like that. Is the firmware on the drive up-to-date? Are you using decent Verbatim/Taiyo Yuden media? Do you have the drive setup properly on the correct controller and with the correct/up-to-date drivers? Link to comment Share on other sites More sharing options...
mima Posted June 20, 2008 Author Share Posted June 20, 2008 List your hardware, post a log, post filter driver load order as well Look at imgburn help menu for logs and tools for filter driver Thanks for the suggestions -- I appreciate your taking the time to reply. Link to comment Share on other sites More sharing options...
Recommended Posts