Fail to read sector when verifiring

[plauge]

Hello

 

Im getting this error pretty often. Sometimes a reboot helps sometimes not, cant really figure out why im getting this error. anyways here is the log

 

I 17:20:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2269145)

I 17:25:47 Synchronising Cache...

I 17:25:49 Closing Track...

I 17:25:50 Finalising Disc...

I 17:26:02 Exporting Graph Data...

I 17:26:02 Graph Data File: C:\Users\chr\AppData\Roaming\ImgBurn\Graph Data Files\LITE-ON_DVDRW_LH-20A1S_9L09_19-JULI-2008_17-20_MCC-004-00_MAX.ibg

I 17:26:03 Export Successfully Completed!

I 17:26:03 Operation Successfully Completed! - Duration: 00:05:51

I 17:26:03 Average Write Rate: 15.436 KB/s (11.1x) - Maximum Write Rate: 22.266 KB/s (16.1x)

I 17:26:03 Cycling Tray before Verify...

W 17:26:12 Waiting for device to become ready...

I 17:26:24 Device Ready!

I 17:26:24 Operation Started!

I 17:26:24 Source Device: [1:0:0] LITE-ON DVDRW LH-20A1S 9L09 (I:) (ATA)

I 17:26:24 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-004-00) (Speeds: 2,4x; 4x; 6x; 8x; 12x; 16x)

I 17:26:24 Image File: H:\x.iso

I 17:26:24 Image File Sectors: 2.269.146 (MODE1/2048)

I 17:26:24 Image File Size: 4.647.211.008 bytes

I 17:26:24 Image File Volume Identifier: THE_HISTORY_BOYS

I 17:26:24 Image File Volume Set Identifier: 4697E97A0000001E

I 17:26:24 Image File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 17:26:24 Image File Implementation Identifier: mkisofs

I 17:26:24 Image File File System(s): ISO9660; UDF (1.02)

I 17:26:24 Read Speed (Data/Audio): MAX / MAX

I 17:26:24 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2269145)

I 17:26:24 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2269145)

E 17:32:07 Failed to Read Sector 1123328 - Reason: L-EC Uncorrectable Error

E 17:32:07 Sector 1123328 maps to File: \VIDEO_TS\VTS_01_3.VOB

E 17:32:07 Failed to Verify Sectors!

I 17:32:07 Exporting Graph Data...

I 17:32:07 Graph Data File: C:\Users\chr\AppData\Roaming\ImgBurn\Graph Data Files\LITE-ON_DVDRW_LH-20A1S_9L09_19-JULI-2008_17-20_MCC-004-00_MAX.ibg

I 17:32:07 Export Successfully Completed!

E 17:32:07 Operation Failed! - Duration: 00:05:42

I 17:32:07 Average Verify Rate: 6.569 KB/s (4.7x) - Maximum Verify Rate: 16.343 KB/s (11.8x)

 

Im using Verbertim DVD+R 16x and my burner is a LITE-ON DVDRW LH-20A1S 9L09 (ATA)

 

Best regards

Christian

[LIGHTNING UK!]

Try slowing the burn down to 8x or 12x.

 

As you have a liteon, use cdspeed or dvdinfopro to perform a disc quality test / PIPO scan on that disc and see how well your drive burnt it.

 

Have you already tried looking for firmware updates?

[plauge]

  LIGHTNING UK! said:

Try slowing the burn down to 8x or 12x.

 

As you have a liteon, use cdspeed or dvdinfopro to perform a disc quality test / PIPO scan on that disc and see how well your drive burnt it.

 

Have you already tried looking for firmware updates?

 

Cheers for the fast reply

 

Yes the firmware is up to date. I will try to make a scan, should i just post the log here, dont really have a clue what to look for in such a log.

[LIGHTNING UK!]

It'll be a screenshot rather than a log, but yeah just post it here.

 

Basically, green = good, other colours are bad.

 

The lower the PI and PO errors the better.

[plauge]

oki tryed to run the scan with a ISO i burned succesfully yesterday

 

Hope that i did it the right way.

[LIGHTNING UK!]

That looks pretty damn perfect so now verify the disc again within ImgBurn using the standalone 'Verify' mode.

 

It might just be heat related or something.

[plauge]

Maybe i should just try lower speed like you suggested, try a couple of burns with 8 and 12x to see if that fixed the problem.

[Cynthia]

A tips is to scan it at 4x in that Lite-On. Gives a little more accurate results.

[plauge]

  Cynthia said:

A tips is to scan it at 4x in that Lite-On. Gives a little more accurate results.

 

Hehe oki gonna try that, but dosent that take like forever ?

 

Cheers for the fast replys again

[plauge]

Oki scanned at 4x hope thats better

[Cynthia]

Sorry. I expressed my self bad. It's not the verify speed in ImgBurn that 'needs' to be set to 4x. It was the read speed in DVDInfoPro when you did a scan by using that program on its own.

[plauge]

ah oki gonna try that later on. First im gonna try to burn a ISO on 12x to see if that solves the problem

[plauge]

Oki tryed to make another run with the same ISO as i got the read error on this time with 10x. The burn was succesfull according to Imgburn. I then ran DVDINFO at 4x like you Cynthia recommended and here is the result

 

*Edit* Could this just be a error in the ISO. Considering trying with a 8x burn just for the hell of it, maybe i get a different result.

Edited July 19, 2008 by plauge

[Cynthia]

  Quote

I 17:26:24 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-004-00) (Speeds: 2,4x; 4x; 6x; 8x; 12x; 16x)

10X is not a 'supported' write speed in your firmware, might be the reason for the failure.

 

I write my discs at 8x with my Lite-On as that gives the best results.

 

There are some advanced settings for Lite-On writers.

 

Does your log include this row, with these settings enabled?

 

  Quote

I 00:00:00 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

[plauge]

Oh snap did not know about the 10x thing gonna try with 8 speed and check if that works. Will post results when im done

 

Jups those settings is on

I 19:51:07 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

[plauge]

Burn at 8x with the same ISO again. seemed like speed was the problem overall