IMGBURN Disc error

[fredb]

I tried Imgburn to copy a Video_TS folder to a DVD Disc. All went well as far as speed but the Disc will only play on three out of five DVD players. The two that won't work just gives me a "disk error". I tried the same Video_TS Folder using ConvertX to DVD and although it is as slow as molasses it worked. The disk will play on all DVD Players.

Is their something I can do to make Imgburn work as I really like the program.

[LIGHTNING UK!]

Are you sure your source VIDEO_TS folder had all the right files in it and that the DVD Video structure was valid?

 

i.e. It would need a bunch of IFO/BUP/VOB files in it.

 

ImgBurn is not a conversion tool so it'll only work if the files are in the correct format for your player.

[fredb]

Are you sure your source VIDEO_TS folder had all the right files in it and that the DVD Video structure was valid?

 

i.e. It would need a bunch of IFO/BUP/VOB files in it.

 

ImgBurn is not a conversion tool so it'll only work if the files are in the correct format for your player.

I looked at the folder and yes it has a bunch of IFO/BUP/VOB. Both IMGBURN and ConvertX to DVD do the job as far as putting the files on the disc but the problem is the IMGBURN disc will only play on a few of our DVD players, and the ConvertX to DVD will play on all the DVD players. That's what I don't understand. Why some and not all. I like IMGBURN as it is about four time faster than the other but if it won't work not sure what to do.

Edited August 3, 2008 by fredb

[Cynthia]

Could you post the log from that burn that will not play in your players?

 

You'll find it here:

 

Main Menu -> Help -> ImgBurn Logs

 

[fredb]

Could you post the log from that burn that will not play in your players?

 

You'll find it here:

 

Main Menu -> Help -> ImgBurn Logs

 

 

Is this what you are looking for?

//****************************************\\

; ImgBurn Version 2.4.2.0 - Log

; Saturday, 02 August 2008, 23:09:33

; \\****************************************//

;

;

I 22:56:05 ImgBurn Version 2.4.2.0 started!

I 22:56:05 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 22:56:05 Total Physical Memory: 1,963,788 KB - Available: 1,103,028 KB

I 22:56:05 Initialising SPTI...

I 22:56:05 Searching for SCSI / ATAPI devices...

I 22:56:05 Found 2 DVD

[Cynthia]

I like IMGBURN as it is about four time faster than the other but if it won't work not sure what to do.

I 23:03:56 Average Write Rate: 15,451 KB/s (11.2x) - Maximum Write Rate: 22,270 KB/s (16.1x)

Could it be that you are writing at a lower speed in the other programs?

[fredb]

I like IMGBURN as it is about four time faster than the other but if it won't work not sure what to do.

I 23:03:56 Average Write Rate: 15,451 KB/s (11.2x) - Maximum Write Rate: 22,270 KB/s (16.1x)

Could it be that you are writing at a lower speed in the other programs?

At looked at the log from the other program and it say the default speed setting is X4

Here is a copy of the log from the other program. I can't understand it but it might answer you question

 

 

8/3/2008 3:21:24 PM info Folder C:\Users\Fred\Documents\ConvertXtoDVD\VTS_01_0\ has been removed

8/3/2008 3:21:24 PM info BURN: WRITE SUCCESS: Disc written

8/3/2008 3:21:24 PM info BURN: Finalization Time 00:00:39 - Total completion time 00:14:45

8/3/2008 3:20:45 PM info BURN: Write finished in 00:14:06 - Finalization start here. Avg. burn rate 4.16

8/3/2008 3:06:59 PM info BURN: Lead-in burning time (mS) 21275

8/3/2008 3:06:38 PM info BURN: Write started 2168176 sectors to write

8/3/2008 3:06:38 PM info BURN: Init success: DVD-R DAO

8/3/2008 3:06:38 PM info BURN: Writing speed requested x4.0, effective x4.0

8/3/2008 3:06:37 PM info BURN: Available write speed: 16x, 12x, 8x, 6x, 4x, 2x

8/3/2008 3:06:37 PM info BURN: Media ID: MBI 01RG40

8/3/2008 3:06:37 PM info BURN: Media type: DVD-R

8/3/2008 3:06:37 PM info BURN: Ultra DMA mode 2 (ATA33)

8/3/2008 3:06:35 PM info BURN: Scanned files #14, folder #2 - total size 4439318528 b. (4.13 Gb.)

8/3/2008 3:06:35 PM info BURN: Inserted media type : DVD-R

8/3/2008 3:06:35 PM info BURN: Write started

8/3/2008 3:06:33 PM info --------------Encoding end--------------

8/3/2008 3:06:33 PM info Disc name: "My DVD"

8/3/2008 3:06:33 PM info Burned folder: "C:\Users\Fred\Documents\ConvertXtoDVD\VTS_01_0\"

8/3/2008 3:06:28 PM info BURN: New media (DVD-R) inserted. Burning layer is ready to write

8/3/2008 3:06:25 PM info BURN: Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R

8/3/2008 3:06:25 PM info BURN: Drive has IDE-ATAPI physical interface

8/3/2008 3:06:25 PM info BURN: New Drive selected : 0:1:0 - ATAPI DVD A DH20A4H QP53 [E] (Ide)

8/3/2008 3:06:25 PM info Total size 4233 Mb., Target size DVD5 4300 Mb., Occupation 98.46%

8/3/2008 3:06:25 PM info Conversion completed in 00:59:16

8/3/2008 3:06:24 PM info Rendering rate: 2.97 x Realtime

8/3/2008 3:06:24 PM info DVD duration (incl. menus) 02:55:52 (~ 10552 sec.) - rendering time 00:59:16

8/3/2008 3:05:51 PM info Generated duration 102.72 sec., expected 102.80 sec.

8/3/2008 3:04:14 PM info 0 subtitles frames encoded in subtitle stream #4

8/3/2008 3:04:14 PM info 0 subtitles frames encoded in subtitle stream #3

8/3/2008 3:04:14 PM info 0 subtitles frames encoded in subtitle stream #2

8/3/2008 3:04:14 PM info 0 subtitles frames encoded in subtitle stream #1

8/3/2008 3:04:14 PM info P-SDT buffer Underflow 1 times, 1350 bytes peak

8/3/2008 3:04:14 PM info 2 frames dropped

8/3/2008 3:04:14 PM info 4 frames duplicated

8/3/2008 3:04:10 PM info File #1 Stream #4 Sync. delay : 0.00 ms

8/3/2008 3:04:10 PM info File #1 Stream #3 Sync. delay : 0.00 ms

8/3/2008 3:04:10 PM info File #1 Stream #2 Sync. delay : 0.00 ms

8/3/2008 3:04:10 PM info File #1 Stream #1 Sync. delay : 0.00 ms

8/3/2008 3:04:10 PM info Starting at 00:00:00.000 (0

[Cynthia]

8/3/2008 3:06:38 PM info BURN: Writing speed requested x4.0, effective x4.0

Try to slow down the write speed in ImgBurn to 8x or 12x, to see if those discs can be read by your player.

[fredb]

8/3/2008 3:06:38 PM info BURN: Writing speed requested x4.0, effective x4.0

Try to slow down the write speed in ImgBurn to 8x or 12x, to see if those discs can be read by your player.

 

Can you tell me how to change the write speed?

[Cynthia]

Change it in this box in the Write mode.

 

[fredb]

Change it in this box in the Write mode.

 

 

Didn't work. Just not mint to be. Took it down to 8x but DVD player says its not playable. Did check it out on one of the players that worked and it played fine.

 

Not sure what Convertx to DVD has that makes it work on all players but it does. Just very slow but when thats all you got what are you going to do. Thanks for the help.

[blutach]

8/3/2008 3:06:37 PM info BURN: Media ID: MBI 01RG40

Here's yourt main trouble Fred. This media is pretty shabby and many players will reject it. Get better media - we recommend Verbatim or Taiyo Yuden. If you must stick with these cheap discs from India, slow the burn down.

 

Regards

[fredb]

8/3/2008 3:06:37 PM info BURN: Media ID: MBI 01RG40

Here's yourt main trouble Fred. This media is pretty shabby and many players will reject it. Get better media - we recommend Verbatim or Taiyo Yuden. If you must stick with these cheap discs from India, slow the burn down.

 

Regards

 

I see what you are saying but why will it work with one program and not the other. The player doesn't reject it with ConvertX. Do you think ConvertX makes up for the shabby cheap disc?

[mmalves]

ConvertX burned your disc at 4x, so try that speed with ImgBurn