pmfago Posted September 8, 2008 Share Posted September 8, 2008 Help me please! I don't know what to do. I can't burn my double layer DVD. Here is the log. I 22:00:38 ImgBurn Version 2.4.2.0 started! I 22:00:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 22:00:39 Total Physical Memory: 1.179.120 KB - Available: 707.124 KB I 22:00:39 Initialising SPTI... I 22:00:39 Searching for SCSI / ATAPI devices... I 22:00:39 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 8, 2008 Share Posted September 8, 2008 It doesn't look like your burner supports those discs. Try hunting down a firmware update for the drive, that may fix the problem. Link to comment Share on other sites More sharing options...
mmalves Posted September 8, 2008 Share Posted September 8, 2008 I 22:02:41 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H50L 1.00 (D:) (ATA) There's firmware 1.02 available for your burner at http://au.lgservice.com/ (it's in Device Driver -> DVD-ROM(Writer) -> page 2). remove any disc and close the tray before updating. Reboot after the update has finished. Link to comment Share on other sites More sharing options...
lfcrule1972 Posted September 9, 2008 Share Posted September 9, 2008 Personally speaking I would stay away from DVD-R DL's, the -R Dual Layer discs seem to be very problematic. All my dual layer burns are on Verbatim DVD+R DLs, the plus format is accepted by all my players in the house and has never given me any problems. Link to comment Share on other sites More sharing options...
pmfago Posted September 10, 2008 Author Share Posted September 10, 2008 Thanks to everyone who tried to help me. I've upgraded the firmware. But I still have problems... Do you think my drive is defective? As you can see... I 20:01:02 ImgBurn Version 2.4.2.0 started! I 20:01:02 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 20:01:02 Total Physical Memory: 1.179.120 KB - Available: 727.560 KB I 20:01:02 Initialising SPTI... I 20:01:02 Searching for SCSI / ATAPI devices... I 20:01:02 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted September 10, 2008 Share Posted September 10, 2008 Try with Verbatim DVD+R Dual Layer 2.4x (MKM-001-00 dye) Made in Singapore blanks and it should work As lfcrule1972 said above, DVD-R DL media isn't as reliable as DVD+R DL media Link to comment Share on other sites More sharing options...
lfcrule1972 Posted September 11, 2008 Share Posted September 11, 2008 Unless you have seen problems like this with the drive before I would bet that it's the DVD-R DL discs, I only have one burner that liked them enough to complete the burn and even then I wouldn't use them for anything as my DVD players won't play them..... Link to comment Share on other sites More sharing options...
Recommended Posts