allenlindley Posted September 15, 2008 Share Posted September 15, 2008 will decreasing write speed help with shaky picture problem? Link to comment Share on other sites More sharing options...
mmalves Posted September 15, 2008 Share Posted September 15, 2008 If you use high quality media, such as Verbatim and Taiyo Yuden blanks, you won't have problems regardless of burn speed Ensuring your burner has the latest firmware available also helps burn quality on all types of media. Link to comment Share on other sites More sharing options...
blutach Posted September 15, 2008 Share Posted September 15, 2008 Post a burn log, so we can see what media and firmware you have please. Regards Link to comment Share on other sites More sharing options...
dontasciime Posted September 15, 2008 Share Posted September 15, 2008 will decreasing write speed help with shaky picture problem? No: Moving it off the top of washing machine might. Check your source files, PAL or NTSC and playback device PAL NTSC compatibility Link to comment Share on other sites More sharing options...
hollerith Posted September 16, 2008 Share Posted September 16, 2008 If you use high quality media, such as Verbatim and Taiyo Yuden blanks, you won't have problems regardless of burn speed Ensuring your burner has the latest firmware available also helps burn quality on all types of media. i undersandf this. i use tdk and verbs when burning. the burn is excellent qualiy bt on playback in dvd player the dvd stops and returns to the start. ex. dvd plays then at one point,it differs, will revert back as when the dvd is iniatly inserted and starts all over. after this the dvd plays fine. is this still a media problem or something else. Drive E: Description CD-ROM Drive Media Loaded No Media Type UNKNOWN Name HL-DT-ST DVDRRW GSA-H20L ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRRW_GSA-H20L________________S853____\5&1800DCAB&0&0.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.0.6001.18000, 65.50 KB (67,072 bytes), 5/6/2008 10:11 PM) Drive F: Description CD-ROM Drive Media Loaded No Media Type UNKNOWN Name HL-DT-ST DVD-RAM GSA-H55N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 1 PNP Device ID IDE\CDROMHL-DT-ST_DVD-RAM_GSA-H55N_______________1.05____\5&1800DCAB&0&0.1.0 Driver c:\windows\system32\drivers\cdrom.sys (6.0.6001.18000, 65.50 KB (67,072 bytes), 5/6/2008 10:11 PM) hopes this might help. noobie. if wrong forum pls advise. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 16, 2008 Share Posted September 16, 2008 The burn + verify log would still help. Burning the verbatims at 8x or 12x should give you a disc that works just fine. If it's not then maybe it's the standalone that has the problem? Link to comment Share on other sites More sharing options...
Recommended Posts