stix Posted October 1, 2008 Posted October 1, 2008 (edited) Trying to make a back up copy of a disc and need some ideas. I've made three coasters @ 1x and one coaster @ 8x. I've made two ISOs. The second was read at 1x and verified. Here is the log I 20:46:26 ImgBurn Version 2.4.2.0 started!I 20:46:26 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 20:46:26 Total Physical Memory: 3,405,372 KB - Available: 1,920,404 KB I 20:46:26 Initialising SPTI... I 20:46:26 Searching for SCSI / ATAPI devices... I 20:46:27 Found 1 DVD Edited October 1, 2008 by stix
mmalves Posted October 1, 2008 Posted October 1, 2008 I 21:17:36 Destination Media Type: DVD+R (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x)I 21:17:36 Destination Media Sectors: 16,384,000 Upgrade your burner's firmware to the latest version SB03 and try again. Remove any disc and close the tray before updating the firmware. Reboot after it has finished.
LIGHTNING UK! Posted October 1, 2008 Posted October 1, 2008 The first error you get is the real one, the ones from retries don't always mean anything. So in your case, this is the real error... W 21:28:38 Failed to Write Sectors 2537792 - 2537823 - Reason: Write Error Basically, your drive is saying it can't write to the media (for whatever reason). Hopefully the SB03 firmware mmalves mentioned will sort it out, but if it doesn't you should try to find some MKM-001-00 verbatims instead (the 2.4x ones).
stix Posted October 1, 2008 Author Posted October 1, 2008 Loaded the new firmware to the drive, rebooted and burned @ 4x. Sucess! Thanks for your help! I 17:00:07 ImgBurn Version 2.4.2.0 started!I 17:00:07 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 17:00:07 Total Physical Memory: 3,405,372 KB - Available: 2,201,304 KB I 17:00:07 Initialising SPTI... I 17:00:07 Searching for SCSI / ATAPI devices... I 17:00:07 Found 1 DVD
Recommended Posts