ally009 Posted October 9, 2008 Posted October 9, 2008 (edited) can anyone tell me why out of 10 disks (VERBATIM) ONLY ! HAS BURNED below is log Thanks I 15:30:00 ImgBurn Version 2.4.2.0 started! I 15:30:00 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 15:30:00 Total Physical Memory: 2,096,620 KB - Available: 1,354,920 KB I 15:30:00 Initialising SPTI... I 15:30:00 Searching for SCSI / ATAPI devices... I 15:30:04 Found 2 DVD-ROMs and 2 DVD Edited October 9, 2008 by ally009
dontasciime Posted October 9, 2008 Posted October 9, 2008 They are only really rated at 2.4 so burning them at 8x is not always a good idea Try burning 1 @ 2.4x after making sure your using the latest firmware for your pioneer Also fix why your hard drive is slow maybe look at FAQ and follow the DMA help. Scan the hard drive for errors and defrag it also and if you are using your computer to download or scan for viruses or spyware whilst trying to burn, STOP IT. leave it to burn the disc.
ally009 Posted October 9, 2008 Author Posted October 9, 2008 They are only really rated at 2.4 so burning them at 8x is not always a good idea Try burning 1 @ 2.4x after making sure your using the latest firmware for your pioneer Also fix why your hard drive is slow maybe look at FAQ and follow the DMA help. Scan the hard drive for errors and defrag it also and if you are using your computer to download or scan for viruses or spyware whilst trying to burn, STOP IT. leave it to burn the disc. have updated drivers and burned other nine at x2 all same
LIGHTNING UK! Posted October 9, 2008 Posted October 9, 2008 Why on earth would you burn so many if they're failing?! 1 failure... try again 2 failures... hmm bit pissed off 3 give up If your drive won't burn to the discs then you've either got a really bad batch (i.e. Verbs that aren't from Singapore) or your drive has gone south. You can get a new one for
dainese954 Posted October 9, 2008 Posted October 9, 2008 (edited) i have about 9 verbatim coasters aswell. i need to find the problem becuase 2 out of 11 is not a good ratio please someone help p.s. i just noticed that we were both trying to burn the same file error_.bmp I 23:43:25 ImgBurn Version 2.4.2.0 started! I 23:43:25 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 23:43:25 Total Physical Memory: 2,879,916 KB - Available: 2,035,676 KB I 23:43:25 Initialising SPTI... I 23:43:25 Searching for SCSI / ATAPI devices... I 23:43:55 Found 1 DVD Edited October 9, 2008 by dainese954
dontasciime Posted October 9, 2008 Posted October 9, 2008 i have about 9 verbatim coasters aswell. i need to find the problem becuase 2 out of 11 is not a good ratio please someone help p.s. i just noticed that we were both trying to burn the same file error_.bmp I 23:43:25 ImgBurn Version 2.4.2.0 started! I 23:43:25 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 23:43:25 Total Physical Memory: 2,879,916 KB - Available: 2,035,676 KB I 23:43:25 Initialising SPTI... I 23:43:25 Searching for SCSI / ATAPI devices... I 23:43:55 Found 1 DVD
dainese954 Posted October 9, 2008 Posted October 9, 2008 (edited) Your layerbreak is wrong for starters & get yourself and external usb burner how do i change layerbreak? Edited October 9, 2008 by dainese954
dontasciime Posted October 9, 2008 Posted October 9, 2008 You should not need to alter layerbreak as it should be in the .DVD file And ImgBurn should be left to calculate optimal from write settings when used with .dvd file 1913760 is the correct value enter this as value when you have no .dvd and tick user specified and then put it back and use the proper function only with .dvd .mds etc so as too avoid mistakes.
Recommended Posts