Nurface Posted October 24, 2008 Posted October 24, 2008 Have tried many types of media and followed the golden rules of imgburn... But still after the image is burnt and the session is trying to close the disc out, I get the error of session fixation error writing lead out. Every time after completion, it will get to aroung 95% then the error and of course the sytem retries 3 times to finalize and this is the ending result every time. Probably been asked a million times but searched and tried solutions and need help
LOCOENG Posted October 24, 2008 Posted October 24, 2008 It would help us help you if you'd post a burn log
Nurface Posted October 25, 2008 Author Posted October 25, 2008 I 16:49:07 ImgBurn Version 2.4.1.0 started! I 16:49:07 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 16:49:07 Total Physical Memory: 981,480 KB - Available: 405,412 KB W 16:49:07 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 16:49:07 Drive F:\ (FAT32) does not support single files > 4 GB in size. I 16:49:08 Initialising SPTI... I 16:49:08 Searching for SCSI / ATAPI devices... I 16:49:08 Found 1 DVD
volvofl10 Posted October 25, 2008 Posted October 25, 2008 I 16:49:07 ImgBurn Version 2.4.1.0 started!I 16:50:36 Destination Device: [2:0:0] TSSTcorp CD/DVDW TS-H552L 0614 (E:) (ATA) I 16:50:36 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 16:50:36 Write Speed: 4x UPDATE to ImgBurn v 2.4.2.0 for a start, your behind the times with your version change to verbatim 2.4x media with ID of MKM-001 made in Singapore, there the best for DL as we recomend set your write speed to one thats listed in the speeds part of the log, you had 4x for discs that your drive can only write to at 2.4x check for firmware updates for your drive
Nurface Posted October 25, 2008 Author Posted October 25, 2008 TSSTcorp CD/DVDW TS-HS552L is my drive... How do I find a firmware update for it
LIGHTNING UK! Posted October 25, 2008 Posted October 25, 2008 Normally you go to the website of whoever makes your PC. Don't forget to update ImgBurn. This covers something else volvofl10 mentioned - http://forum.imgburn.com/index.php?showtopic=8000
Recommended Posts