Error when burning .ISO file

[Martijn423]

I tried to burn an Xbox 360 game for the first time. I have no experience doing this so I'm probably asking a dumb question. I tried to burn Fable 2 but I got this error:

 

http://img395.imageshack.us/my.php?image=imgburn3mt1.jpg

 

Can anyone help me?

 

PS: For some reason I cannot post the image, sorry for that.

Edited October 26, 2008 by Martijn423

[Martijn423]

Posted wrong image

[Cynthia]

Hi and welcome to the forum, Martijn423!

 

No problems to post that image if you use this syntax:

 

[IMG=http://img510.imageshack.us/img510/3030/imgburnof3.jpg]

 

Looks as the writer can't read the burned disc. A verify fail.

 

Can you post the full log from that failed burn? You'll find it here: Main Menu -> Help -> ImgBurn Logs

[Martijn423]

I can only copy it when i press 'continue' but within a second it pops back up. This is the biggest piece I could copy:

 

I 11:20:31 Device Ready!

I 11:20:31 Operation Started!

I 11:20:31 Source Device: [1:0:0] ASUS DRW-1608P2S 1.37 (H:) (ATA)

I 11:20:31 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 2,4x)

I 11:20:31 Image File: G:\Grabit downloads\Fable2 region free - NeMeHoB-3\Fable2 region free - NeMeHoB\Fable2-NeMeHoB.dvd

I 11:20:31 Image File Sectors: 3.825.924 (MODE1/2048)

I 11:20:31 Image File Size: 7.835.492.352 bytes

I 11:20:31 Image File Volume Identifier: XGD2DVD_NTSC

I 11:20:31 Image File Volume Set Identifier: 34672923

I 11:20:31 Image File Implementation Identifier: Sonic Scenarist 3.1

I 11:20:31 Image File File System(s): ISO9660; UDF (1.02)

I 11:20:31 Read Speed (Data/Audio): MAX / MAX

I 11:20:31 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 11:20:31 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 11:20:31 Verifying Layer 0... (LBA: 0 - 1913759)

I 11:29:34 Verifying Layer 1... (LBA: 1913760 - 3825923)

[LIGHTNING UK!]

READ -> http://forum.imgburn.com/index.php?showtopic=8000

[Cynthia]

There is a later firmware version for that writer, it might give you a better burn.

 

ASUS DRW-1608P2S firmware version 1.41

 

ASUS_DRW_1608P2S_FW141EU.ZIP

 

No disc in the burner and the tray closed while you update it.

 

The DL media you are using is not the of the highest quality so it could be the reason for the write error.

 

The version 1.39 added a lot of new stuff:

 

ASUS DRW-1608P2S firmware version 1.39

Support new DVD-R media.

Support new DVD-R (DL) media.

Support new DVD-RW media.

Support new DVD+R media.

Support new DVD+R (DL) media.

Improve writing quality.

[Martijn423]

I left Imgburn open. So I should close it now, then update the firmware and try again with a new disc?

[Cynthia]

Yes. Don't forget to remove the disc before flashing it.

[Martijn423]

Why is that?

 

So I can throw this disc away? Bummer

[Cynthia]

If the disc can't be read - I wouldn't keep it. Also restart the computer after the flash.

[Martijn423]

I updated my drive with the patch cynthia posted, but I still get the same error.

 

Can anyone help me?

[mmalves]

Please read again post #5 from this thread

[Martijn423]

I use Philips dvd's

 

Are those bad?

[LIGHTNING UK!]

Being branded by 'Philips' doesn't mean anything, it's the dye that's important and yours are using the 'RITEK-S04-66' one.

 

The best / most compatible one is 'MKM-001-00' and you'll only find that on Verbatim DVD+R DL 2.4x speed discs.