mourningstar625 Posted October 28, 2008 Posted October 28, 2008 Hello All, A very recent frustration has me very confused as to what my problem is. I bought some Memorex +R DL 8x to make backups of game discs. At first I tried Nero to make a UDF disc with the ISO and I got a write failed just as it switched to the second layer of the disc, coaster. Repeat process several times and get same error at the same place, more coasters. Do some research about error message on google, no real clear definition to what the problem could be from drive, media, vista. Download the better program, imgburn , remake image try and burn again and get the same error when it switches from layer 1 to layer 2, more coasters and pulling hair out at this point. Try one more for shits and giggles in nero and one finally burned all the way through. Try again, error in the same spot. Try Imgburn again, error in the same spot. Proceed to rip hair out. Anyway, here is my log. Also, this drive will burn any other media just fine, single layer DVDs and CDs in all kinds of ways. So what is my problem, bad drive? bad media? Vista ? I 17:13:18 ImgBurn Version 2.4.2.0 started! I 17:13:18 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1) I 17:13:18 Total Physical Memory: 4,191,824 KB - Available: 2,992,592 KB I 17:13:18 Initialising SPTI... I 17:13:18 Searching for SCSI / ATAPI devices... I 17:13:19 Found 1 DVD
techman Posted October 28, 2008 Posted October 28, 2008 I have a simulator setup and was having problems until i changed write speed to 4x. It worked for the 1 DVD I had time to make will try more burns later.
LIGHTNING UK! Posted October 28, 2008 Posted October 28, 2008 http://forum.imgburn.com/index.php?showtopic=8000
mourningstar625 Posted October 28, 2008 Author Posted October 28, 2008 so you think its just the media, and not OS or drive problems?
LIGHTNING UK! Posted October 28, 2008 Posted October 28, 2008 Your drive returned the error codes consistent with the error 'Write Error' - meaning it had problems writing to the disc. The cause for that can only be related to the drive, its firmware version and the media you're using. If those 3 aren't a good combo you'll get a duff burn - as you did. The most obvious fix is to use better media, hence the reason for the 'Verbatim 2.4x DVD+R DL disc' thread.
lfcrule1972 Posted October 29, 2008 Posted October 29, 2008 Given the amount of Memorex DL's you have lost in this process it must now be worth your while buying Verb DVD+R DLs with the MKM-001 dye (if you can find them)
Recommended Posts