v0id Posted October 29, 2008 Posted October 29, 2008 Hi, I just bought a new Pioneer dvr-216d burner which worked fine for the first DVD I burnt but the last two have given me this error: 12:58:35 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Protected 12:59:10 Finalise Disc Failed! - Reason: Write Protected 12:59:10 Retrying (1 of 3)... 12:59:10 Retry Failed - Reason: No Additional Sense Information 12:59:10 Retrying (2 of 3)... 12:59:10 Retry Failed - Reason: No Additional Sense Information 12:59:10 Retrying (3 of 3)... 12:59:10 Retry Failed - Reason: No Additional Sense Information 14:50:48 Retrying (4)... 14:50:48 Retry Failed - Reason: No Additional Sense Information 14:50:56 Failed to Write Image! The discs appear to play fine, the image file I'm burning isn't write protected and I've been using the same batch of good quality verbatims I always use. So whats causing this error? Thanks.
v0id Posted October 29, 2008 Author Posted October 29, 2008 Yes it is, DFI Lanparty Ultra-D NF4 to be exact. Why?
LIGHTNING UK! Posted October 29, 2008 Posted October 29, 2008 Because the new NVIDIA drivers are rubbish and return bogus error codes to ImgBurn - they corrupt the real ones. Older versions of the driver are fine.
techman Posted October 29, 2008 Posted October 29, 2008 Because the new NVIDIA drivers are rubbish and return bogus error codes to ImgBurn - they corrupt the real ones. Older versions of the driver are fine. so what versions are considered safe and which versions to avoid. Also using the generic driver removes this problem?
v0id Posted October 29, 2008 Author Posted October 29, 2008 (edited) Thanks Lightning So as the disc plays ok should I just ignore these 'bogus' errors? Also is there a reason why my first burn was fine and the next two gave the errors? Edited October 29, 2008 by v0id
dontasciime Posted October 29, 2008 Posted October 29, 2008 Because the new NVIDIA drivers are rubbish and return bogus error codes to ImgBurn - they corrupt the real ones. Older versions of the driver are fine. so what versions are considered safe and which versions to avoid. Also using the generic driver removes this problem? standard ms ones are better on all my nforce boards [6.53 works ok for opticals nforce 3/4]
techman Posted October 29, 2008 Posted October 29, 2008 Because the new NVIDIA drivers are rubbish and return bogus error codes to ImgBurn - they corrupt the real ones. Older versions of the driver are fine. so what versions are considered safe and which versions to avoid. Also using the generic driver removes this problem? standard ms ones are better on all my nforce boards [6.53 works ok for opticals nforce 3/4] I use a 680i chipset what best for it?
dontasciime Posted October 29, 2008 Posted October 29, 2008 for me just standard ms driver at op install.
v0id Posted November 2, 2008 Author Posted November 2, 2008 (edited) Are these bogus errors worth worrying about? Do they affect the burn quality in any way? Because apart from this problem I'm quite happy with the new nforce drivers. Edited November 2, 2008 by v0id
Recommended Posts