Petinho Posted November 1, 2008 Posted November 1, 2008 Evening Been backing up my xbox360 games abit now but needed to format as windows went nuts yesterday. just trying to back up antoher game now and for some reason its having none of it, getting the "Failed to set L0 Data Zone Capacity, Reason: Power Calibration Area Error" as i said i've been backing up fow abit now so its not the media as i've used the same all the time. I have the latest firmware for my Song DW-Q30A burner (YYS7) so i'm just stuck for idea's now as this is the 1st time it's happened. LOG I 18:11:28 ImgBurn Version 2.4.2.0 started! I 18:11:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 18:11:28 Total Physical Memory: 3,668,396 KB - Available: 3,047,964 KB I 18:11:28 Initialising SPTI... I 18:11:28 Searching for SCSI / ATAPI devices... I 18:11:28 Found 1 DVD-ROM/CD-RW and 1 DVD
dontasciime Posted November 1, 2008 Posted November 1, 2008 Change to verbatim and it is your media also 4x is the lowest you can use on those disc's you have You can argue as much as you want about not having any trouble previously. You were lucky thats all, as the media is so inconsistent as has just been proved, it no longer works for you. Get some verbatim MKM-001-00 and burn @2.4x and use a .dvd file instead of specifying layerbreak and let IB do it from calculate optimal
Kenadjian Jr Posted November 2, 2008 Posted November 2, 2008 I dont no if this is useful but you have 1x selected and those disks only support 4x, 6x, 8x and it is best to burn at 2.4x for DL media but your disks dont support that ether
Petinho Posted November 10, 2008 Author Posted November 10, 2008 sorted the problem and as i said nothing to do with the media. The drive had died. put a pioneer 216D in and all is fine now
LIGHTNING UK! Posted November 10, 2008 Posted November 10, 2008 Had it died for all media (including single layer) or just that one? Anyway, enjoy burning to your Ricoh's!
Petinho Posted November 10, 2008 Author Posted November 10, 2008 it was burning afew single layers fine and giving errors on some so got rid
dontasciime Posted November 10, 2008 Posted November 10, 2008 Lets hope your 360 drive does not break and any replacement drive/repair from M$ still likes the Ricoh disc's you have already wasted I mean burnt.
Recommended Posts