ella2 Posted November 3, 2008 Posted November 3, 2008 Hi, My first post!!! I have been getting an i/o error for my last 5 attempts! I read the forum and thought that the media i had was not good enough so went and paid for sony discs, the first one worked so i thought i had cracked it but the rest have had an i/o error below is the log of the latest failure, any help in what the problem is would be appreciated as i have gone through enough discs and do not want to give up!!!!! Thanks! I 19:04:59 ImgBurn Version 2.4.2.0 started! I 19:04:59 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 19:04:59 Total Physical Memory: 2,086,164 KB - Available: 987,924 KB I 19:04:59 Initialising SPTI... I 19:04:59 Searching for SCSI / ATAPI devices... I 19:05:02 Found 1 DVD
LIGHTNING UK! Posted November 3, 2008 Posted November 3, 2008 Check with your laptop manufacturer to see if there are any firmware updates available for your drive. Being 'Sony' discs doesn't really mean anything, you need to pay attention to the dye they use - in your case that's 'OPTODISCW004'. Your drive must have a problem burning them as it's unable to read back what it just wrote. Get yourself some decent *write once* (i.e. not rewritable!) discs made by Verbatim or Taiyo Yuden and you should be ok.
ella2 Posted November 3, 2008 Author Posted November 3, 2008 Get yourself some decent *write once* (i.e. not rewritable!) discs made by Verbatim or Taiyo Yuden and you should be ok. Hi, I tried it also with a decent disc though not the type you mentioned, it was a 'write once' + it was with these discs that it worked once only so after wasting a pack of 5 i then went onto the rewritable, which has worked twice? but failed the last 5 attempts here is the log for the one i tried with the 'write once' disc. Also just to say even though i am getting the i/o error the disc does still play on my laptop though not on my dvd player or ps3. I 08:00:14 ImgBurn Version 2.4.2.0 started! I 08:00:14 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 08:00:14 Total Physical Memory: 2,086,164 KB - Available: 830,548 KB I 08:00:14 Initialising SPTI... I 08:00:14 Searching for SCSI / ATAPI devices... I 08:00:14 Found 1 DVD
LIGHTNING UK! Posted November 3, 2008 Posted November 3, 2008 Unless it's using the MCC or TY dye, I don't consider it 'decent' I'm afraid. Try cleaning the lense on your laptop drive, they're not exactly well designed and it's easy for it to get dirty.
ella2 Posted November 28, 2008 Author Posted November 28, 2008 Unless it's using the MCC or TY dye, I don't consider it 'decent' I'm afraid. Try cleaning the lense on your laptop drive, they're not exactly well designed and it's easy for it to get dirty. Hi, I have purchased some verbatim media, and cleaned the lens on both my player and writer, the I/O error has gone and the dvds burn without any problems, however out of the last 3 i have played 2 of them are skipping freezing and pixelating......???? i am stumped now as they play fine on the laptop , can anyone give me any idea what to do next???? Thanks for all help so far
Cynthia Posted November 28, 2008 Posted November 28, 2008 Computer drivers are often better at reading burned discs. Your stand alone player might not like burned discs?
ella2 Posted November 28, 2008 Author Posted November 28, 2008 Computer drivers are often better at reading burned discs. Your stand alone player might not like burned discs? Would it play two fine and two badly? it played one for 1hr then started jumping so i did the lens clean and it played the rest fine, so i thought that was the problem until today when we just sat down to watch another one at 45mins in it started going wrong, here is the log for the one that jumped just in case there is something i am missing? feel really frustrated by this as i am new to this burning and want to get it right rather than give up!!!! I am getting a new burner soon as i am relying on my laptop which is new but realise that it is not the best thing for burning. Could it be something to do with the speed i am writing at, the burner is 8x and the discs i am using are 4x ???? Thanks jue ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Monday, 24 November 2008, 12:44:03 ; \\****************************************// ; ; I 12:13:20 ImgBurn Version 2.4.2.0 started! I 12:13:20 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 12:13:20 Total Physical Memory: 2,086,164 KB - Available: 863,468 KB I 12:13:20 Initialising SPTI... I 12:13:20 Searching for SCSI / ATAPI devices... I 12:13:20 Found 1 DVD
Cynthia Posted November 28, 2008 Posted November 28, 2008 Do a disc scan in DVDInfoPro or Nero Discspeed to see how good the burn was. It might be that even if the verify was ok - there are weak points on the disc. http://www.cdspeed2000.com/ http://www.dvdinfopro.com/
ella2 Posted November 28, 2008 Author Posted November 28, 2008 Do a disc scan in DVDInfoPro or Nero Discspeed to see how good the burn was. It might be that even if the verify was ok - there are weak points on the disc. http://www.cdspeed2000.com/ http://www.dvdinfopro.com/ Hi again, I have done the scan and it showed no read errors, all green......does that mean its the dvd player??? it is old and they are cheap is it worth buying a new one? jue
ella2 Posted November 28, 2008 Author Posted November 28, 2008 Heres a print screen of my scan, Thanks again, Jue
Cynthia Posted November 28, 2008 Posted November 28, 2008 Try to press the 'Scan' icon and run it with 4x in speed.
Cynthia Posted November 29, 2008 Posted November 29, 2008 Looks as there is a problem after 3/4 of the disc. You have another media you could try to write with and see if it plays back better. Could be a scratch on the surface on the RW disc that makes the play back problems for you.
LIGHTNING UK! Posted November 29, 2008 Posted November 29, 2008 I did mention in post number 2 not to use rewritable discs, the burn is never as good as one you'd get from write once media.
ella2 Posted November 29, 2008 Author Posted November 29, 2008 I did mention in post number 2 not to use rewritable discs, the burn is never as good as one you'd get from write once media. Hi, I know about the RW discs but until i get the hang of burning and not making mistakes then i am going to stick with them, i have wasted so many discs now, the disc above was new and had not been used before. I did a scan of the disc that worked perfectly and that came in at 96% quality. Will run scans on my other discs now. So just to understand then the jumping and pixelating is still because of the media?? Thanks so far J
Cynthia Posted November 29, 2008 Posted November 29, 2008 You have another stand alone player that you can try to play the discs in?
ella2 Posted November 29, 2008 Author Posted November 29, 2008 Hi again, I have re burned the dvd using a different disc that had been used once before and played perfectly, i did the scan prior to playing and it came up 74% quality so thought i would give it a go and watch it, after 60mins it started pixelating and freezing again, here is the log of the scan i did prior to watching it. What next?
Cynthia Posted November 29, 2008 Posted November 29, 2008 In post #3 you used this media I 08:09:47 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 3x, 4x, 6x, 8x) Seems others have problems with the same media and this writer. http://www.computerhope.com/forum/index.php?topic=69745.0 http://forum.imgburn.com/index.php?showtopic=8334
ella2 Posted November 29, 2008 Author Posted November 29, 2008 (edited) Hi cynthia, The computer hope post was my husband before i posted on here, he did not get any replies so i posted here. I gave up with the sony discs after going through the whole pack and lightning said they were no good. The verbatim has been better as they have stopped the i/o errors, so its just the pixelating that is the problem now with some burns. I just need to identify what it is that is causing it, as its so frustrating!! I will be buying a new dvd player but not sure why the one i have is playing some perfect and other with pixelation. julie Edited November 29, 2008 by ella2
volvofl10 Posted November 29, 2008 Posted November 29, 2008 Hi cynthia, The computer hope post was my husband before i posted on here, he did not get any replies so i posted here. I gave up with the sony discs after going through the whole pack and lightning said they were no good. The verbatim has been better as they have stopped the i/o errors, so its just the pixelating that is the problem now with some burns. I just need to identify what it is that is causing it, as its so frustrating!! I will be buying a new dvd player but not sure why the one i have is playing some perfect and other with pixelation. julie Not all dvd players will play all brands of discs, i know, youd expect themt o eb able to , but they cant. You now have to find a brand of disc ( and format of disc) that your PC,writer, and dvd players all like. The suggestion to you would be Taiyo yuden 8x TYG02 -R discs.usually only available online as opposed to normal stores/shops. Where in the world are you ? if your UK, then svp.co.uk is your best bet. they also do trial packs of a few differant makes of disc.
Recommended Posts