richmoral Posted November 11, 2008 Share Posted November 11, 2008 This doesn't happen all the time but for some reason after DVD burn completes and the tray recycles. It will go into Verification and then the time left remaining will change to unknown and my whole system becomes idle. I'll open up Task Manager and it shows that ImgBurn is still running but for some reason I can't close it, using from with ImbBurn or using end task in task manager. Also under task manager - system idle - cpu would be at like 99. I'm using Windows XP Pro with a NEC 1320AW. I've noticed that it happens some times and other times it finishes verification and will say completed successfully. I'm not getting any verification errors in the log or anything of that nature. The program just hangs. Also it doesn't seem to be hanging the same point each time just seems like it's happening random or what not. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 11, 2008 Share Posted November 11, 2008 It'll be waiting for some I/O to complete - during this time ImgBurn is not in control, your OS is. Update your motherboard chipset/controller drives, remove any dodgy fiter drivers. Update motherboard bios, drive firmware. Link to comment Share on other sites More sharing options...
richmoral Posted November 11, 2008 Author Share Posted November 11, 2008 It'll be waiting for some I/O to complete - during this time ImgBurn is not in control, your OS is. Update your motherboard chipset/controller drives, remove any dodgy fiter drivers. Update motherboard bios, drive firmware. I just updated the firmware are the burner. Thing is I never had problems with it before doing this when I used Nero. I just successful burned another copy of what I was trying to burn and this time it went through the whole thing successfully. If it's drivers or what not wouldn't it mess up like almost all the time. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 11, 2008 Share Posted November 11, 2008 Who knows. ImgBurn is only a tiny part of what it takes to burn a disc successfully. It relies upon good comms to the drive and the success / failure of a burn (burn quality) comes down to the drive / media / firmware. If your system works well, so will ImgBurn. Link to comment Share on other sites More sharing options...
richmoral Posted November 19, 2008 Author Share Posted November 19, 2008 (edited) That's odd because I never had freezing problems when using Nero. The only reason I switched was because Nero would chop the Volume Label down to so many characters. Also I'm using Write files/folders to disc mode. I'm using Verbatim 16X DVD+R blank media but I'm burning at 2.4X. Also just now for the first time it stopped while still in the middle of burning where as before it was during the verification process. Edited November 19, 2008 by richmoral Link to comment Share on other sites More sharing options...
Recommended Posts