crazybrain18 Posted December 2, 2008 Share Posted December 2, 2008 Hey all, I'm a relative newbie and this has got me stumped. I keep trying to burn a DVD and keep getting the same error message about 2 minutes in. Here's my log: I 21:05:09 ImgBurn Version 2.4.2.0 started! I 21:05:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:05:09 Total Physical Memory: 720,368 KB - Available: 312,496 KB W 21:05:09 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 21:05:09 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 21:05:09 Initialising SPTI... I 21:05:09 Searching for SCSI / ATAPI devices... I 21:05:19 Found 1 CD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
Cynthia Posted December 2, 2008 Share Posted December 2, 2008 Hi and welcome to the forum, crazybrain18! Tried to burn at 4x speed? Link to comment Share on other sites More sharing options...
crazybrain18 Posted December 2, 2008 Author Share Posted December 2, 2008 Hi and welcome to the forum, crazybrain18! Tried to burn at 4x speed? Well I set the write speed to AUTO, so I don't know what it chose. Hope that helps... Link to comment Share on other sites More sharing options...
Cynthia Posted December 2, 2008 Share Posted December 2, 2008 AUTO is if you have set a certain write speed with the feature 'Automatic Write Speed'. If no value is set - it will go for MAX speed. You can read about it here: http://forum.imgburn.com/index.php?showtopic=4249 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 2, 2008 Share Posted December 2, 2008 Is the value to the right in brackets when you've got it set to 'AUTO' really not at all obvious? What do people think it is if not the speed? Link to comment Share on other sites More sharing options...
Datore Posted December 3, 2008 Share Posted December 3, 2008 (edited) I got the same error several times "tracking servo failure" on my PX-755A, I used it yesterday with same brand of media, and today I got that error, My solution was this: I used compressed air, and blowed into the recorder while the slide was out, then there was no "tracking servo failure" or any other error! I have burned a few DVD+R now without problems. Edited December 3, 2008 by Datore Link to comment Share on other sites More sharing options...
Recommended Posts