bter128 Posted December 5, 2008 Posted December 5, 2008 (edited) Hello! I've been experiencing problems when I'm trying to burn BD-R DL discs with my brand new LG bluray burner (GGW-H20L with the latest -YL05- firmware). I tried several Panasonic BD-R DL (MEI T01-001) and in every occasion the writing process fails at about 50%.. I also tried TDK's BD-R DL (TDKBLD-RFB-00), however the problem remains, the discs turn to useless coasters.. In the meantime the burner writes flawlessly any BD-R 25GB, DVDs and CDs that I throw in, even my TDK BD-RE DL (50GB) (TDKBLD-wfa-00). Is there an incompatibility with the above mentioned media or is there a problem with my burner? Has anyone used them succesfully? I would be obliged if you could help.. Here is the log: I 12:51:01 ImgBurn Version 2.4.2.0 started! I 12:51:01 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 12:51:01 Total Physical Memory: 3.405.948 KB - Available: 1.347.520 KB I 12:51:01 Initialising SPTI... I 12:51:01 Searching for SCSI / ATAPI devices... I 12:51:10 Found 1 BD-ROM and 1 BD-RE/HD DVD-ROM! I 12:51:45 Operation Started! I 12:51:45 Source File: E:\D.iso I 12:51:45 Source File Sectors: 18.324.832 (MODE1/2048) I 12:51:45 Source File Size: 37.529.255.936 bytes I 12:51:45 Source File Volume Identifier: DAT I 12:51:45 Source File Volume Set Identifier: 3958A54901179C3F I 12:51:45 Source File Application Identifier: ImgBurn v2.4.2.0 I 12:51:45 Source File Implementation Identifier: ImgBurn I 12:51:45 Source File File System(s): UDF (2.50) I 12:51:45 Destination Device: [7:0:0] HL-DT-ST BD-RE GGW-H20L YL05 (G:) (ATA) I 12:51:45 Destination Media Type: BD-R (Disc ID: TDKBLD-RFB-00) (Speeds: 2x; 4x) I 12:51:45 Destination Media Sectors: 24.438.784 I 12:51:45 Write Mode: BD I 12:51:45 Write Type: DAO I 12:51:45 Write Speed: MAX I 12:51:45 BD-R FastWrite: No I 12:51:45 Link Size: Auto I 12:51:45 Test Mode: No I 12:51:45 OPC: No I 12:51:45 BURN-Proof: Enabled I 12:53:01 Filling Buffer... (40 MB) I 12:53:01 Writing LeadIn... I 12:53:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 18324831) I 12:53:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 18324831) W 14:37:21 Failed to Write Sectors 5619840 - 5619871 - Reason: Power On, Reset, or Bus Device Reset Occurred W 14:37:21 Retrying (1 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (2 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (3 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (4 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (5 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (6 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (7 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (8 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (9 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (10 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (11 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (12 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (13 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (14 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (15 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (16 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (17 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (18 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (19 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write W 14:37:21 Retrying (20 of 20)... W 14:37:21 Retry Failed - Reason: Invalid Address For Write E 14:38:40 Failed to Write Sectors 5619840 - 5619871 - Reason: Power On, Reset, or Bus Device Reset Occurred I 14:38:41 Synchronising Cache... W 14:38:41 Synchronise Cache Failed! - Reason: Medium Not Present - Tray Closed W 14:38:41 Retrying (1 of 3)... W 14:38:41 Retry Failed - Reason: Medium Not Present - Tray Closed W 14:38:41 Retrying (2 of 3)... W 14:38:41 Retry Failed - Reason: Medium Not Present - Tray Closed W 14:38:41 Retrying (3 of 3)... W 14:38:41 Retry Failed - Reason: Medium Not Present - Tray Closed E 14:38:43 Synchronise Cache Failed! - Reason: Medium Not Present - Tray Closed I 14:38:44 Closing Track... W 14:38:44 Close Track Failed! - Reason: Medium Not Present - Tray Closed W 14:38:44 Retrying (1 of 3)... W 14:38:44 Retry Failed - Reason: Medium Not Present - Tray Closed W 14:38:44 Retrying (2 of 3)... W 14:38:44 Retry Failed - Reason: Medium Not Present - Tray Closed W 14:38:44 Retrying (3 of 3)... W 14:38:44 Retry Failed - Reason: Medium Not Present - Tray Closed E 14:38:46 Close Track Failed! - Reason: Medium Not Present - Tray Closed I 14:38:46 Finalising Disc... W 14:38:46 Finalise Disc Failed! - Reason: Medium Not Present - Tray Closed W 14:38:46 Retrying (1 of 3)... W 14:38:46 Retry Failed - Reason: Medium Not Present - Tray Closed W 14:38:46 Retrying (2 of 3)... W 14:38:46 Retry Failed - Reason: Medium Not Present - Tray Closed W 14:38:46 Retrying (3 of 3)... W 14:38:46 Retry Failed - Reason: Medium Not Present - Tray Closed E 14:38:48 Failed to Write Image! I 14:38:48 Exporting Graph Data... I 14:38:48 Graph Data File: C:\Users\Bill\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_GGW-H20L_YL05_ΠΑΡΑΣΚΕΥΉ-5-ΔΕΚΈΜΒΡΙΟΣ-2008_12-51_μμ_TDKBLD-RFB-00_MAX.ibg I 14:38:48 Export Successfully Completed! E 14:38:48 Operation Failed! - Duration: 01:47:02 I 14:38:48 Average Write Rate: 1.773 KB/s (0.4x) - Maximum Write Rate: 9.692 KB/s (2.2x) I 14:38:50 Close Request Acknowledged I 14:38:50 Closing Down... I 14:38:50 Shutting down SPTI... I 14:38:50 ImgBurn closed! Edited December 5, 2008 by bter128
LIGHTNING UK! Posted December 5, 2008 Posted December 5, 2008 It would appear your drive is resetting itself or the drivers are issuing a bus reset, I've no idea why that would be happening. Which controller is your drive attached to?
bter128 Posted December 5, 2008 Author Posted December 5, 2008 It would appear your drive is resetting itself or the drivers are issuing a bus reset, I've no idea why that would be happening. Which controller is your drive attached to? It's a SATA drive, attached to INTEL ICH10 6 port SATA AHCI controller. Here's the Nero log if it is of any help.. Windows Vista 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 9.0.9.100 Internal Version: 9, 0, 9, 100 Recorder: <HL-DT-ST BD-RE GGW-H20L>Version: YL05 - HA 1 TA 0 - 9.0.9.100 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <ELBY CLONEDRIVE >Version: 1.2 - HA 1 TA 1 - 9.0.9.100 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : ELBY CLONEDRIVE 1.2 VClone Port 9 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST BD-RE GGW-H20L G: CdRom0 ELBY CLONEDRIVE H: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1922MB (1968448kB) Memory in use : 42 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.12.2008 Burn BD Image 7:17:37 μμ #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 7:17:37 μμ #2 Text 0 File Burncd.cpp, Line 3563 Turn on Disc-At-Once, using Blu-ray Disc media 7:17:37 μμ #3 Text 0 File DlgWaitCD.cpp, Line 312 Last possible write address on media: 23652351 (5256:04.51, 46195MB) Last address to be written: 18324831 (4072:11.06, 35790MB) 7:17:37 μμ #4 Text 0 File DlgWaitCD.cpp, Line 324 Write in overburning mode: NO (enabled: CD) 7:17:37 μμ #5 Text 0 File DlgWaitCD.cpp, Line 2951 Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-R (seq) 7:17:37 μμ #6 Text 0 File DlgWaitCD.cpp, Line 499 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:17:37 μμ #7 Text 0 File ThreadedTransferInterface.cpp, Line 756 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1) 2 indices, index0 (150) not provided original disc pos #0 + 18324832 (18324832) = #18324832/4072:11.7 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 18324832 blocks [G: HL-DT-ST BD-RE GGW-H20L] -------------------------------------------------------------- 7:17:37 μμ #8 Text 0 File ThreadedTransferInterface.cpp, Line 958 Prepare [G: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 37529255936, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 18324832 | 18324832 | 0x00 18324832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 7:17:37 μμ #9 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 7:17:37 μμ #10 Text 0 File Burncd.cpp, Line 4362 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 7:17:37 μμ #11 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 7:17:37 μμ #12 Text 0 File Burncd.cpp, Line 4484 Cache writing successful. 7:17:37 μμ #13 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 7:17:37 μμ #14 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 4x (17.980 KB/s) 7:17:38 μμ #15 Text 0 File ThreadedTransferInterface.cpp, Line 2675 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:17:38 μμ #16 Text 0 File Cdrdrv.cpp, Line 10187 ---- Disc Structure (BD): Disc Information on BD (00h) ---- Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098 --- Header --- Disc Information Identifier: <DI> Disc Information Format: 01 h Number of DI Units/Aux Frames in each DI block: 8 Number of (recording) layer to which this DI Unit applies: 0 DI unit Sequence Number in DI Block: 0 Continuation flag: Next DI Unit is the start of a new set of parameters (0) Number of DI bytes in use in this DI unit: 98 --- Body --- Disc Type Identifier: <BDR> Disc Size/Class/Version: 1 DI Unit Format dependent contents: BD Structure: 34 (22 h): 2 recording layer (DL), BD-R Hybrid Disc identifier/Channel bit length: 1 (1 h): no DVD layer present, no CD layer present channel bit length of 74,5 nm (25.0 GB max. per layer) Push-Pull polarity flag bits: 00 h Recorded mark polarity flag bits: 00 h BCA descriptor: BCA-code present (1) Maximum transfer rate needed by the application: 0 Mbit/s Data zone allocation: First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072) Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494) Recording velocities: Nominal Recording Velocity: 4.92 m/s (1EC h) Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1 Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1 ... 22 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00 00 19 4E 7E 01 EC 64 64 - 46 46 46 46 3C 3C 3C 3C 00 00 00 00 AA 60 6A 05 - 05 36 1C 80 90 20 20 20 20 20 20 20 20 30 30 30 - 30 70 00 70 00 70 00 70 00 68 00 68 00 68 00 68 - 00 68 00 68 00 68 00 68 00 90 90 C0 C0 C0 00 00 --- Trailer --- Disc Manufacturer ID: 54 44 4B 42 4C 44 h <TDKBLD> Media Type ID: 52 46 42 <RFB> Time Stamp [m:y]: 0 : 0000 (00 00 h) Product Revision Number: 0 7:21:41 μμ #17 SPTI -1169 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x04 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80 Buffer x0550d780: Len x20 7:21:41 μμ #18 SPTI -1169 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0xAD 01 00 00 00 00 00 0A 08 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x04 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80 Buffer x0806f440: Len x800 7:21:41 μμ #19 Text 0 File BD.cpp, Line 520 Format BD-R with Format Type 0h, sub-type 1, spare area size 0 -> return code 0 Allocated spare area size on disc 0 BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0), spare area allocation: allocation (1), Stream recording: NO (0); return code -1169 7:21:41 μμ #20 CDR -1169 File ThreadedTransferInterface.cpp, Line 1682 Logical unit not ready, operation in progress G: HL-DT-ST BD-RE GGW-H20L 7:21:41 μμ #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682 Could not perform start of Disc-at-once 7:21:41 μμ #22 SPTI -1169 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x04 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80 Buffer x0802c880: Len x48 7:21:41 μμ #23 Text 0 File DVDPlusDualLayer.cpp, Line 1424 SetDriveCaps: Set LAST LBA of layer 1 to 0 7:21:41 μμ #24 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 83836800 7:21:41 μμ #25 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 4x (17.980 KB/s) 7:21:42 μμ #26 SPTI -1169 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x04 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80 7:21:42 μμ #27 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:21:42 μμ #28 SPTI -1169 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x04 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80 7:21:42 μμ #29 SPTI -1169 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x04 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80 7:21:42 μμ #30 SPTI -1169 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x04 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 D4 04 04 00 80 7:21:42 μμ #31 Text 0 File Cdrdrv.cpp, Line 11444 DriveLocker: UnLockVolume completed 7:21:42 μμ #32 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
mmalves Posted December 5, 2008 Posted December 5, 2008 No, it doesn't help as this is ImgBurn Support Forum, not Ner0. Anyway, make sure you have the latest Intel Matrix Storage drivers.
bter128 Posted December 5, 2008 Author Posted December 5, 2008 No, it doesn't help as this is ImgBurn Support Forum, not Ner0. Anyway, make sure you have the latest Intel Matrix Storage drivers. Thanks anyway, I pinpointed the problem to the presence of Virtual Clone Drive. I removed it and everything is fine now..
LIGHTNING UK! Posted December 5, 2008 Posted December 5, 2008 Are you using the latest beta version? v5.4.1.3 or something Lots of people use it without any problems.
bter128 Posted December 5, 2008 Author Posted December 5, 2008 Are you using the latest beta version? v5.4.1.3 or something Lots of people use it without any problems. Nope, I was using 5.3.1.2. I'll give it a try, many thanks!!
Recommended Posts