resident037 Posted January 6, 2009 Share Posted January 6, 2009 I have the latest ImgBurn and the latest firmware 1.09 on my Pioneer 116 drive. I have always used ImgBurn and I use TY Dvd-R I have the right drive selected and its not a bad disc because I try others and the same thing happens. Even if I switch drives and put the blank in the other drive I still get the same thing. My Dvd Rom Drives are G: and E: Once I restart my computer it works properly, but I get this every so often. It has to be something wrong with my computer and not ImgBurn I 14:05:03 ImgBurn Version 2.4.2.0 started! I 14:05:03 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 14:05:03 Total Physical Memory: 2,029,440 KB - Available: 1,365,656 KB I 14:05:03 Initialising SPTI... I 14:05:03 Searching for SCSI / ATAPI devices... I 14:05:03 Found 1 DVD-ROM, 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 6, 2009 Share Posted January 6, 2009 Eject the disc and reinsert it. Does the message in the status bar change at all... even for a second? You can also eject the disc, press F8 and then insert it again. ImgBurn polls the drive every second and you'll see debug I/O commands scrolling in the log window reporting the status code of the drive. If you don't get anything in the log when you press F8 it probably means the bus has crashed/got stuck and it needs resettings - which is what would happen when you reboot. What type/make of controller is your drive connected to? Do you have an intel chipset motherboard? an nvidia one? Link to comment Share on other sites More sharing options...
resident037 Posted January 6, 2009 Author Share Posted January 6, 2009 W 14:44:29 I/O Interface 'Debug Mode' has been Enabled! I 14:44:29 [0:1:0] PIONEER DVD-RW DVR-116D 1.09 (G:) (ATA) I 14:44:29 CDB: 00 00 00 00 00 00 I 14:44:29 CDB Interpretation: Test Unit Ready E 14:44:29 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 E 14:44:29 SENSE Interpretation: Medium Not Present I have NVIDIA GeForce 6100 nForce 405 (Microsoft Corporation - WDDM) Link to comment Share on other sites More sharing options...
resident037 Posted January 6, 2009 Author Share Posted January 6, 2009 I just noticed that when this problem occurs that my computer won't even read any disc .. It thinks that the drive is empty and ejects .... What could this be.... Link to comment Share on other sites More sharing options...
resident037 Posted January 6, 2009 Author Share Posted January 6, 2009 Now I restarted and it works These are the settings I have, any good ? PIONEER DVD-RW DVR-116D 1.09 (ATA) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2,297,888 Free Space: 4,706,074,624 bytes Free Time: 510:40:38 (MM:SS:FF) Supported Write Speeds: 4x, 6x, 8x, 12x Pre-recorded Information: Manufacturer ID: TYG02 Recording Management Area Information: PIONEER DVD-RW DVR-116D Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 Link to comment Share on other sites More sharing options...
Recommended Posts