Pudah Posted January 14, 2009 Posted January 14, 2009 (edited) My brother-in-law sent me a DVD of pictures of my nieces and nephew. However I was not able to read it in Explorer. The disc shows as "incomplete" in ImgBurn and "open" in Nero CD-DVD Speed: PIONEER DVD-RW DVR-115D 1.18 (ATA) Current Profile: DVD-R Disc Information: Status: Incomplete Erasable: No Sessions: 1 Free Sectors: 2,204,032 Free Space: 4,513,857,536 bytes Free Time: 489:49:07 (MM:SS:FF) Supported Write Speeds: 4x, 6x, 8x, 12x, 16x, 18x Pre-recorded Information: Manufacturer ID: CMC MAG. AM3 Recording Management Area Information: HL-DT-ST DVDRRW GSA-H30L Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 Nero CD-DVD Speed: Disc Info Basic Information Disc type: : DVD-R Book Type : DVD-R Manufacturer: : CMC MID : CMC MAG. AM3 Write speeds: : 4 X - 6 X - 8 X - 12 X - 16 X - 18 X Blank Capacity : 4.38 GB : 4489 MB : 4707319808 bytes Extended Information Layers : 1 Usage : General Copyright protection : n/a Recorder information : recorded with HL-DT-ST DVDRRW GSA-H30L Disc Status : Open Raw Data Pre-recorded Information in Lead-in (0Eh) 0000 - 01 40 C1 FD 9E D8 52 00 02 84 0D 12 98 99 90 00 - .@....R......... 0010 - 03 43 4D 43 20 4D 41 00 04 47 2E 20 41 4D 33 00 - .CMC.MA..G..AM3. 0020 - 05 88 80 00 00 00 02 00 FF FF FF FF C2 4C D5 77 - .............L.w 0030 - F2 4A D5 77 00 00 00 00 78 01 11 00 CC 4B D5 77 - .J.w....x....K.w 0040 - D0 02 91 00 03 00 00 00 00 00 00 00 0A 00 1D 00 - ................ 0050 - 01 00 00 00 FC 01 11 00 9D 75 D5 77 00 00 00 00 - .........u.w.... 0060 - F1 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 - ................ Is there any way I can close this disc, or do I need to tell BIL to make a new one? I did try Tools->Drive->Close, but it didn't seem to do anything. Edited January 14, 2009 by Pudah
LIGHTNING UK! Posted January 14, 2009 Posted January 14, 2009 Did you try all 3 of the things under the 'Close' option? Do them one after the other starting at the top ('Track' I believe).
Pudah Posted January 14, 2009 Author Posted January 14, 2009 I think I did Close Disc earlier. Unfortunately I can't remember. I just now tried Close Track and got a pop-up error message that said I/O Error! ScsiStatus: 0x02 Interpretation: Check Condition CDB: 5B 00 01 00 00 01 00 00 00 00 Intrpretation: Close Track/Session Sense Area: 70 00 25 00 00 00 00 0E 0000 00 00 64 00 00 00 00 00 00 00 00 00 Interpretation: Illegal Mode For This Track I get the same thing when I do Close Session, and again when I do Close Disc. Not sure why I didn't get that pop-up message earlier. All of that was on my Pio DVR-115D burner. On a whim I tried the same on my Optiarc AD-7190 (which I think is really a Litey). No error messages this time. And, after doing Close track, then Session, and then Disc, followed by a Refresh on the drive now shows the disc as Complete: Optiarc DVD RW AD-7190A 1.05 (ATA) Current Profile: DVD-R Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2,297,888 Size: 4,706,074,624 bytes Time: 510:40:38 (MM:SS:FF) Supported Write Speeds: 4x, 6x, 8x, 12x, 16x TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 2297887) -> LeadOut (LBA: 2297888) Pre-recorded Information: Manufacturer ID: CMC MAG. AM3 Recording Management Area Information: HL-DT-ST DVDRRW GSA-H30L Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,494,495 Last Physical Sector in Layer 0: 0 But I still can't read the disc in Explorer. I'll have to get the BIL to burn another disc.
mmalves Posted January 14, 2009 Posted January 14, 2009 Try IsoBuster for extracting the contents of that disc.
Pudah Posted January 15, 2009 Author Posted January 15, 2009 I did give IsoBuster a try. I let it run all night long and it only got thru 12%. Not worth the hassle. I'll just ask my brother-in-law to burn another disc. Thanks for the tips.
Recommended Posts