Ken604 Posted January 23, 2009 Posted January 23, 2009 (edited) Error_Messages.doc Hello Everyone, I am trying to burn an Xbox360 (.iso) game and I recieve error Finalise Disc Failed! Reason: Peripheral Device Write Fault Device: [1:0:0] Matshita DVD-RAM UJ-850s 1.10(E:) (ATA). I have successfully burned 1 game, but now I am suddenly receiving this error when I attempt to burn the second game. I am using DL Verbatum Discs (made in Singapore), ImgBurn Write Speed 2.4x and Windows Vista. I was unsuccessful at manually closing the disc. Please refer to the attached screen prints above for more information. Thanks, I 21:03:22 ImgBurn Version 2.4.2.0 started! I 21:03:22 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 21:03:22 Total Physical Memory: 1,037,760 KB - Available: 450,948 KB I 21:03:22 Initialising SPTI... I 21:03:22 Searching for SCSI / ATAPI devices... I 21:03:22 Found 1 DVD Screen_Prints.doc Edited January 23, 2009 by Ken604
LOCOENG Posted January 23, 2009 Posted January 23, 2009 You might look for a firmware update for your drive, good luck with that. But honestly I would look for another drive as the Matshita drives are notoriously bad.
Ken604 Posted January 23, 2009 Author Posted January 23, 2009 My computer is only a year old. Thus, my firmware should be ok. Could there be any other reasons.
LIGHTNING UK! Posted January 23, 2009 Posted January 23, 2009 Not really, no. The drive had a problem writing to the media so the issue is somewhere between your drive, its firmware and the media you're using. Nothing else really comes into the equation. You could try using a cleaning disc on the drive in case the lense is a tiny bit dirty.
Recommended Posts