shen293 Posted January 23, 2009 Posted January 23, 2009 From what I have read so far... I've noticed that people say to burn a DVD at a really fast speed, ex:16x would result in a blurry/bad playback and that burning at 2x speed is much safer and the results are clearer in a way Are both of these true? And also considering that some people may burn a DVD in like a matter of 5 minutes... And since my burning takes like about an hour to an hour and a half and that everytime when I try to burn a DVD with a speed greater than 2x I get a problem... anyone have any solutions to this problem.. it would be appreciated thanks..
Cynthia Posted January 23, 2009 Posted January 23, 2009 Hi and welcome to the forum, shen293! The 'best' speed is a combination of the right media/burner/firmware. For a 16x rated disc, I find that the best result is either 8x or 12x. You need to burn some discs at various speeds and then compare the results from a disc scan done by Nero DiscSpeed/DVDInfoPro. The tricky thing is that not all writers are good for scanning purpose. Your slow speed sounds as DMA is not enabled. In the FAQ section of the forum, there is an entry on how to fix that. I assume you have an internal writer and not an external USB writer that could have been connected to a slow 1.1 USB connection. Can you post a log from one of your burns? You'll find it here: Main Menu -> Help -> ImgBurn Logs
volvofl10 Posted January 23, 2009 Posted January 23, 2009 There both partially true, based on wether your using a laptop or a desktop, what your drive is,(wether old or new) , your system ( high/middle/low spec), your media ( what choice you made, if its recognised as top quality or garbage) , How upto date your drives firmware is, how old your dvd player is and what formats it will play comfortably ect , ect , ect Post a log file of one of 'your' burns and lets see if we can improve your write speeds for you EDIT . Pipped to the post by Cynthia
mmalves Posted January 23, 2009 Posted January 23, 2009 Luckily I've used the Preview button, or we'd have 3 answers all at the same time
Cynthia Posted January 23, 2009 Posted January 23, 2009 Luckily I've used the Preview button Aha, this one.
shen293 Posted January 24, 2009 Author Posted January 24, 2009 Thank you so much guys As for the log I'll post up a couple as soon as I stock up on more blank DVD-R I'm planning to get Verbatim as I heard that that was like one of the best media Previously I used Sony DVD-R and recently I wasted like about 25 dvd's or maybe more(which pissed me off) ... as I keep getting an I/O error... I'll post up a log for that too.. so whenever I burn ..its like I'm taking a risk... so I wanna change that too.. I'll keep you guys updated..thanks so much
mmalves Posted January 24, 2009 Posted January 24, 2009 Cynthia's post tells where to find the old logs so you don't have to burn again to get the log
shen293 Posted January 24, 2009 Author Posted January 24, 2009 Yea that too..thanks and btw... what is DMA ? heard about it somewhere and have no idea to it... how do I enable it to? thanks loads
Cynthia Posted January 24, 2009 Posted January 24, 2009 DMA http://forum.imgburn.com/index.php?s=&...dpost&p=967
shen293 Posted January 24, 2009 Author Posted January 24, 2009 Hey guys..ok I went through the logs that I have and I realized that I have 2 different errors... This is one of them: I 09:23:34 ImgBurn Version 2.4.2.0 started! I 09:23:34 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 09:23:34 Total Physical Memory: 981,480 KB - Available: 502,424 KB W 09:23:34 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 09:23:34 Initialising SPTI... I 09:23:34 Searching for SCSI / ATAPI devices... I 09:23:34 Found 1 DVD-ROM and 1 DVD
LIGHTNING UK! Posted January 24, 2009 Posted January 24, 2009 Log 1. Try burning at a more sensible speed. Log 2. Read the FAQ.
shen293 Posted January 24, 2009 Author Posted January 24, 2009 I was burning at 2x speed.. I'm wondering if 8x speed would be more sensible?
LIGHTNING UK! Posted January 24, 2009 Posted January 24, 2009 That's the speed everyone here recommends 2x isn't even an option on those discs with your drive/firmware so it would have been using 4x (as that's the first one it supports). Look at the 'Supported Write Speeds' in the disc info on the right.
shen293 Posted January 25, 2009 Author Posted January 25, 2009 LIGHTNING UK, So For Log 1: I would try to burn at 8x speed and post up the results as For Log 2: I don't get what I'm really supposed to do.. I read it up on FAQ and did as what you say.. except when I search up "E:" on Process Explorer, I get 36 matching items ( after clicking 'Find' -> 'Find Handle') as when I search up "cdrom" on Process Explorer, I get 0 matching items And you said to click search on it... which I did and understood it too.. But Should I like terminate all '36 matching items' or not? cause I'm worried that it would corrupt or maybe disrupt my entire computer system Is it safe and would cause no harm? thanks...
mmalves Posted January 25, 2009 Posted January 25, 2009 Are you getting the unable to lock volume message when trying to burn? You only need to do what the FAQ says when you're getting that message and don't know which program is holding the drive.
shen293 Posted January 28, 2009 Author Posted January 28, 2009 Are you getting the unable to lock volume message when trying to burn? You only need to do what the FAQ says when you're getting that message and don't know which program is holding the drive. I am getting the ubable to lock volume message.. and currently I am trying to fix it through the FAQ if anything I'll post it up...thanks
shen293 Posted January 29, 2009 Author Posted January 29, 2009 I have tried burning another DVD at a more sensible speed which was 8x... however, I'm still using the same media DVD-R Sony 4.7gb and not Verbatim yet.. just to see what would be the outcome and this was what I got: I 20:32:14 ImgBurn Version 2.4.2.0 started! I 20:32:14 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 20:32:14 Total Physical Memory: 981,480 KB - Available: 393,604 KB W 20:32:14 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 20:32:14 Initialising SPTI... I 20:32:14 Searching for SCSI / ATAPI devices... I 20:32:14 Found 1 DVD-ROM and 1 DVD
mmalves Posted January 29, 2009 Posted January 29, 2009 I 21:34:17 Average Write Rate: 838 KB/s (0.6x) - Maximum Write Rate: 1,155 KB/s (0.8x) Did you follow the post about DMA and removed your controllers? If you did, do it again as it's back to PIO mode.
shen293 Posted January 29, 2009 Author Posted January 29, 2009 (edited) I read the FAQ.. and under my Device Manager I found my Primary and Secondary IDE channel not under IDE Controllers branch but under an unknown section The name of the section is "Unknown" (which I doubt really matter... does it?) And under that, I have 2 primary IDE controllers and 2 secondary IDE controllers and only the 1st primary controller of the 2 and the 2nd secondary controller of the 2 has a scroll under 'Transfer Mode' which was under the category of 'Advanced Setting' that gives me the option to choose "DMA if available" or "PIO Only" both my primary and secondary are on "DMA if available" The 'Transfer Mode' on my secondary IDE channel IS on DMA if available but the 'Current Transfer Mode' is on PIO mode Btw I have a Windows xp I'm a little lost to what I'm suppose to do now Edited January 29, 2009 by shen293
mmalves Posted January 29, 2009 Posted January 29, 2009 Use SIW (look in Hardware -> Motherboard/BIOS/PCI/etc) or similar tool to find out which chipset you have then use Google to find the latest drivers for your chipset. I know this sounds difficult but this is needed to make your computer work in an optimal manner. It is also possible that this may help with your burning problems.
shen293 Posted January 29, 2009 Author Posted January 29, 2009 I tried using SIW as you said... but its a hassle...havta go through many procedures.. and my computer is at least 4 years old so do you think that may be the problem to why I always fail burning.. I probably would have to get a new driver yea? my current one is HP DVD Writer 740b ED24
mmalves Posted January 29, 2009 Posted January 29, 2009 Driver isn't the same thing as drive (e.g. the burner itself).
shen293 Posted January 29, 2009 Author Posted January 29, 2009 I'm so sorry.. I meant drive* XD I'm also guessing that my drive doesn't like the media I'm using So I'll be testing it out with Verbatim to see what happens.. I'll post up the results too
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now