anobeak Posted January 25, 2009 Posted January 25, 2009 (edited) I have burnt multiple backups on Memorex discs, and each time my 360 reads the disc for about ten seconds, and then goes back to saying "open tray." However, I got no errors when making the dics, and at the end ImgBurn tells me everything was completed, and further more the computer will load the disc and tell me to put it into a 360 console in order to run it. The machine is properly prepared to read good backups, though, because I do have a backup disc produced by a third-party that the system reads just fine. I have some Verbatim DVD+R DL's coming in the mail, and will see if that fixes the problem. In the meantime, I wanted some advice if there someone out there who can help me. I am curious as to the importance of changing the bitsetting/booktype when burning a 360 game. My Toshiba Satellite's burner either doesn't support bitsetting/booktype change, or does not work with ImgBurn to do it. Al least not in a way I can figure out. Is it necessary to do this in order to produce a working 360 backup, or do you think the Verbatim over the Memorex is my only real issue? Thanks in advance for your reply. Edited January 25, 2009 by anobeak
LIGHTNING UK! Posted January 25, 2009 Posted January 25, 2009 This isn't a 360 support forum, it's for people having problems burning with ImgBurn. If you get an error trying to use the program, post a copy of the log (like it says to do in the pink bar at the top). Remember to Verify your burns and pay attention to the 'sticky' threads at the top of the forum too.
Recommended Posts