error when burning dual layer xbox 360 backup

[prikprikprik]

if i have a backup of an xbox 360 game, xxxx.iso and xxxx.dvd everything works fine.

if i only have the xxxx.iso file and set the layer break at 1913760 and start burning i keep getting this error if the process is at exactly 50%

 

can you help me with this??

 

 

; //****************************************\\

; ImgBurn Version 2.4.2.0 - Log

; zondag, 25 januari 2009, 23:11:52

; \\****************************************//

;

;

I 22:50:50 ImgBurn Version 2.4.2.0 started!

I 22:50:50 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 22:50:50 Total Physical Memory: 1.046.620 KB - Available: 501.672 KB

I 22:50:50 Initialising SPTI...

I 22:50:50 Searching for SCSI / ATAPI devices...

I 22:50:50 Found 1 DVD

[LIGHTNING UK!]

The difference between having the .dvd and not having it is fluke.

 

Update your firmware - http://www.sony-optiarc.eu/supportservice/...cs/ad7200s.html

 

You're using cheapo media, read this: http://forum.imgburn.com/index.php?showtopic=8000

[prikprikprik]

The difference between having the .dvd and not having it is fluke.

 

Update your firmware - http://www.sony-optiarc.eu/supportservice/...cs/ad7200s.html

 

You're using cheapo media, read this: http://forum.imgburn.com/index.php?showtopic=8000

 

 

Thanks

 

So if i use verbatim, it should work? Now i am using Atita The shop where i bought my dvd recorder advised me to use these. they said it was almost as good als the verbatim, only half the price...

[LIGHTNING UK!]

Of course they said that, they want to sell them

 

If the Verbs detailed in that thread don't work then your drive is probably faulty.

[prikprikprik]

Of course they said that, they want to sell them

 

If the Verbs detailed in that thread don't work then your drive is probably faulty.

 

 

i've ordered some verbatim disks, should be delivered somewhere this week.

 

So if my drive doesn't work properly, i shoul use another drive. but what drive shold be a good one to use?

[prikprikprik]

the firmware upgrade doesn't work, ik says update doesn;t work

[Cynthia]

It should say something more specific if it doesn't work. Perhaps the download got corrupt?

 

[prikprikprik]

it says: update failed.

 

thats all...

[LIGHTNING UK!]

Try using binflash.

 

http://binflash.cdfreaks.com/

 

Get the Win32 gui one, load it up and click 'Flash'. Point it to the 'AD7200S_1090W_1531.exe' file and see if that works.

[prikprikprik]

Try using binflash.

 

http://binflash.cdfreaks.com/

 

Get the Win32 gui one, load it up and click 'Flash'. Point it to the 'AD7200S_1090W_1531.exe' file and see if that works.

 

this doesn't word either, how do i know if ive got the right firmware? This is the firmware that i have downloaded from the sony-optiarc site...

[LIGHTNING UK!]

AD-7200S is what you've got and AD-7200S is the firmware you've downloaded.

 

So really there shouldn't be any problem flashing the drive.

 

Do you have another PC you could connect the drive to and try it in there?

[Cynthia]

There is an even later version here - version 1.0A.

 

http://www.sony-optiarc.us/en/support-serv...-ad-series.html

 

[prikprikprik]

There is an even later version here - version 1.0A.

 

http://www.sony-optiarc.us/en/support-serv...-ad-series.html

 

 

 

the newer version doesn't work either.

[LIGHTNING UK!]

It's probably due to the controller your drive is connected to and the mode it's in / driver that's in use.

 

Do you have access to any other PC's you could try it in?

[prikprikprik]

It's probably due to the controller your drive is connected to and the mode it's in / driver that's in use.

 

Do you have access to any other PC's you could try it in?

 

 

no i only have 1 PC