elite gm Posted January 31, 2009 Posted January 31, 2009 I've backed up a few xbox 360 games just fine, and with the last 2 I tried to burn, i've created 4 coasters...this is the error message: I 19:10:16 ImgBurn Version 2.4.2.0 started! I 19:10:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 19:10:16 Total Physical Memory: 2,882,012 KB - Available: 2,379,164 KB I 19:10:16 Initialising SPTI... I 19:10:16 Searching for SCSI / ATAPI devices... I 19:10:16 Found 1 DVD
Cynthia Posted January 31, 2009 Posted January 31, 2009 Hi and welcome to the forum, elite gm! Disc ID: RITEK-S04-66 Based on other posts it seems that some Lite-On writers have problems with these discs. It's not the best quality on those discs. You also have the latest firmware installed. Have you tried some other speeds - like 4x or 8x?
LIGHTNING UK! Posted January 31, 2009 Posted January 31, 2009 Do you have an NVIDIA chipset on your motherboard? If not, which one do you have? Or at least, which controller is the drive connected to?
elite gm Posted January 31, 2009 Author Posted January 31, 2009 (edited) Do you have an NVIDIA chipset on your motherboard? If not, which one do you have? Or at least, which controller is the drive connected to? Yes it is an NForce XFX 790i Ultra. I actually have everything up to date and had bios version 1 installed and was burning games on these memorex discs perfectly fine. I only noticed this error after 2 things (the issue could be either one of them or neither, could be unrelated)... 1. Installed bios ver. 8 2. These new games are 7.05 GB, the largest games I've tried to burn. But #2 doesnt make much sense. I know the discs are capable of 8.5GB so idk if thats the problem. And as for #1, I dont know how that could effect it, but maybe???? Otherwise, Ive burnt 5-6 games perfectly fine...and they work perfect. Edited January 31, 2009 by elite gm
elite gm Posted January 31, 2009 Author Posted January 31, 2009 (edited) Something I just noticed, all the backups that I have successfully burned are 7.29GB. The ones I cannot burn are 7.05. Is this the issue? Bad iso's? Edited January 31, 2009 by elite gm
mmalves Posted January 31, 2009 Posted January 31, 2009 The latest Nvidia drivers are buggy and give that error. The next ImgBurn version (release date unknown) will have a workaround for this. In the meantime, try using another I/O interface (Tools -> Settings -> I/O tab) and it should work
elite gm Posted February 1, 2009 Author Posted February 1, 2009 The latest Nvidia drivers are buggy and give that error. The next ImgBurn version (release date unknown) will have a workaround for this. In the meantime, try using another I/O interface (Tools -> Settings -> I/O tab) and it should work Okay I just tried another game that Ive never burned before, this one 7.29GB. It burned perfectly fine with the memorex disc and loads perfect. I have narrowed this down to the 7.05GB ISO's being the problem. I havent proven this beyond a doubt, but pretty close. I have it set on the SPTI interface. Maybe it needs a differnt interface for the smaller images????
Cynthia Posted February 1, 2009 Posted February 1, 2009 I doubt that ISOs of certain sizes should need a different interface.
elite gm Posted February 1, 2009 Author Posted February 1, 2009 I doubt that ISOs of certain sizes should need a different interface. Again, burnt yet another backup 7.29GB that worked perfect. Something is up with me not being able to burn the 7.05GB backups...I am now almost completely sure that this is the issue.
Cynthia Posted February 1, 2009 Posted February 1, 2009 Curious. Those that could be burned without issues. Did you have the 'Verify' option enabled on those ones?
LIGHTNING UK! Posted February 1, 2009 Posted February 1, 2009 You're getting issues because the nvidia drivers don't return the correct status codes from the drive if the calling application asks for more than 18 bytes of sense area data. This has been talked about several times recently, do a quick search. Using a different I/O interface should work around the issue because they seem to impose their own 18 byte limit and ImgBurn's request for more is ignored.
elite gm Posted February 1, 2009 Author Posted February 1, 2009 You're getting issues because the nvidia drivers don't return the correct status codes from the drive if the calling application asks for more than 18 bytes of sense area data. This has been talked about several times recently, do a quick search. Using a different I/O interface should work around the issue because they seem to impose their own 18 byte limit and ImgBurn's request for more is ignored. Okay I tried it again on the 7.05 backup with the different interface and copied WNASPI32.dll to my imgburn directory and it failed again on closing, but this time when i hit try again, it gave me 'waiting for device to become ready..." for 5 minutes and right about when I was gonna kill the app, it went 'Device ready, verifying'. I never got this far before... Now I put it in the 360 and it plays fine...
LIGHTNING UK! Posted February 1, 2009 Posted February 1, 2009 Did it fail with 'No Additional Sense Information' again or something different?
elite gm Posted February 2, 2009 Author Posted February 2, 2009 (edited) Did it fail with 'No Additional Sense Information' again or something different? It failed with no additional sense information, just as it always does. And I just burned another game 7.05gb and it did the same exact thing, then when I click try again it goes to the verify step and verifies successfully. Edited February 2, 2009 by elite gm
Recommended Posts