joe2dee Posted February 6, 2009 Posted February 6, 2009 Hi all , i have a sony vaio laptop and iam using a TTST corp CDDVDW SH-S202J USB EXTERNAL WRITER and iam using verbatim 2x4 dvd+r dl disks my laptop is USB 2.0 but i keep getting this log. any ideas????? cheers guys I 18:06:42 ImgBurn Version 2.4.2.0 started! I 18:06:42 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 18:06:42 Total Physical Memory: 523,056 KB - Available: 265,568 KB I 18:06:42 Initialising SPTI... I 18:06:42 Searching for SCSI / ATAPI devices... I 18:06:42 Found 1 DVD
volvofl10 Posted February 6, 2009 Posted February 6, 2009 I'd try changing the usb cable first , see if thats the problem. if its a faulty lead in the cable, when it breaks contact your laptop will think the external drive has been disconnected.
joe2dee Posted February 6, 2009 Author Posted February 6, 2009 I'd try changing the usb cable first , see if thats the problem. if its a faulty lead in the cable, when it breaks contact your laptop will think the external drive has been disconnected. i managed to burn some pics to a cd-r on it no problem though so i doubt its the cable?????
Cynthia Posted February 6, 2009 Posted February 6, 2009 Some other program running at the same time that takes over the burner/connection?
joe2dee Posted February 7, 2009 Author Posted February 7, 2009 Does the same thing on my desktop , tried a differant usb cable also , cant work this one out????? maybe i just got to buy another burner????? what one would be recommended for xbox360 games?????
mmalves Posted February 7, 2009 Posted February 7, 2009 I've seen that happen when the external enclosure's power supply was giving up.
joe2dee Posted February 7, 2009 Author Posted February 7, 2009 I've seen that happen when the external enclosure's power supply was giving up. Thing is its brand new and i have burnt cds on it no problem thats why iam so confused
LIGHTNING UK! Posted February 8, 2009 Posted February 8, 2009 W 18:07:33 Failed to set L0 Data Zone Capacity!W 18:07:33 Reason: The semaphore timeout period has expired. This is the important bit. Your usb controller and the enclosure controller are clashing in some way which is causing the device to timeout far too early and basically get 'ejected' from the system.
dontasciime Posted February 8, 2009 Posted February 8, 2009 Try a different usb port and also switch I/O to wnaspi32 If still the same research the chipset in your enclosure and buy a different enclosure with a different chipset you may also have to buy another writer, or if you have another writer try that with the enclosure you have at the minute as usb chipset mainboard > I/o > usb chipset enclosure > writer chipset are not getting on so change the combination of these eg new writer in the enc you have may cure, it is very hit and miss but your chances increase the more writers you own versus the more enclosures you have (the weak link will be the mainboard if thats constant and the occurrence of STO keeps happening)
Recommended Posts