Jump to content

problem


robertguero

Recommended Posts

I am having same issue but mine burn almost all the way then comes back with the "power calibration" error.

 

Just odered Verbs from Singapor. Does that matter?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=280311052661

 

Also ordered lens cleaner. Cheapest i could find was Target so bought this one.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=110293503861

 

Heres log file. But I was using Memorex that I have used before without a prob.

 

I 01:34:41 ImgBurn Version 2.4.2.0 started!

I 01:34:41 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 01:34:41 Total Physical Memory: 1,038,764 KB - Available: 628,052 KB

I 01:34:41 Initialising SPTI...

I 01:34:41 Searching for SCSI / ATAPI devices...

I 01:34:41 Found 1 DVD-ROM and 1 DVD

Link to comment
Share on other sites

You can get an updated firmware here:

 

http://www.firmwarehq.com/download_989-fil...SG_174.zip.html

 

Put the write type back on 'SAO/DAO' and try burning at all the speeds the drive says it actually supports on those discs.

 

I 01:35:12 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)
Link to comment
Share on other sites

Did not notice the Ritek when I read thru the log. So are all Memorex Ritek?

 

Also what does it matter where the Verbs were made?

 

Got Memorex lens brush disc today. First time I used it there was a thick line of dust left on the disc behind the brush. Used it again and it was less but just did not expect that.

 

Thanks for your help. Was looking for the firmware update for about 2 days. only could find the Sony Optec update that i could not get to work.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.