DOINKS Posted February 11, 2009 Share Posted February 11, 2009 Hi I am using VERBATIM DVD+R DL DISKS, WITH A NEC ND 3530A (DRIVERS uPDATED) and have done everything I know to solve the problem!!! So could one of you enlightened people help? LOG BELOW: I 22:22:30 ImgBurn Version 2.4.2.0 started! I 22:22:30 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 22:22:30 Total Physical Memory: 521,560 KB - Available: 147,600 KB I 22:22:30 Initialising SPTI... I 22:22:30 Searching for SCSI / ATAPI devices... I 22:22:30 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 11, 2009 Share Posted February 11, 2009 You need the 2.4x speed verbatims (MKM-001-00 dye) and not the 8x ones. What make is your PC? Link to comment Share on other sites More sharing options...
DOINKS Posted February 11, 2009 Author Share Posted February 11, 2009 You need the 2.4x speed verbatims (MKM-001-00 dye) and not the 8x ones. What make is your PC? DELL DIMENSION 3000, THANKS 4 QUICK REPLY! DOES ANYONE WANT 2 BUY SOME VERBATIM X8 DISCS LOL Link to comment Share on other sites More sharing options...
DOINKS Posted February 11, 2009 Author Share Posted February 11, 2009 You need the 2.4x speed verbatims (MKM-001-00 dye) and not the 8x ones. What make is your PC? DELL DIMENSION 3000, THANKS 4 QUICK REPLY! DOES ANYONE WANT 2 BUY SOME VERBATIM X8 DISCS LOL Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 11, 2009 Share Posted February 11, 2009 Hmm that's weird firmware to have on a Dell ND-3530A drive, their site only lists 103C and 104C firmware. Link to comment Share on other sites More sharing options...
DOINKS Posted February 11, 2009 Author Share Posted February 11, 2009 Hmm that's weird firmware to have on a Dell ND-3530A drive, their site only lists 103C and 104C firmware. I changed the firmware to liggy & dees etc. If i change my firmware do i still require X2.4 disks?? Thanks again for your help Link to comment Share on other sites More sharing options...
DOINKS Posted February 11, 2009 Author Share Posted February 11, 2009 Hmm that's weird firmware to have on a Dell ND-3530A drive, their site only lists 103C and 104C firmware. I CHANGED FIRMWARE DO LIGGY & DEES 3.01 TO ALLOW BOOKTYPE SETTINGS, IF I GET X2.4 DISKS WILL THESE WORK? Link to comment Share on other sites More sharing options...
Cynthia Posted February 12, 2009 Share Posted February 12, 2009 One hint if it will work or not is to insert the empty disc and use the Write mode of ImgBurn and see if there are any supported speeds listed. PIONEER DVD-RW DVR-115D 1.22 (ATA)Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4 Link to comment Share on other sites More sharing options...
DOINKS Posted February 12, 2009 Author Share Posted February 12, 2009 THANKS BUT ALL I GET IS: _NEC DVD_RW ND-3530A 3.01 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 3,827,520 Free Space: 7,838,760,960 bytes Free Time: 850:35:45 (MM:SS:FF) DVD Link to comment Share on other sites More sharing options...
Cynthia Posted February 12, 2009 Share Posted February 12, 2009 Then the media you inserted is not supported in the firmware. Link to comment Share on other sites More sharing options...
DOINKS Posted February 12, 2009 Author Share Posted February 12, 2009 THERE IS OTHER FIRMWARE THAT I HAVE BEEN TRYING WITH NO LUCK, OH WELL BACK TO THE DRAWING BOARD. PERHAPS THE CORRECT DISCS WILL SOLVE MY PROBLENS Link to comment Share on other sites More sharing options...
Cynthia Posted February 12, 2009 Share Posted February 12, 2009 Looking at this table there is no later strategy added an in your currently flashed firmware. http://liggydee.cdfreaks.com/stratinfo/en/4/0 I guess the 8x labeled Verbatims were released after 2005-07-01 and therefore not added in the firmware. Link to comment Share on other sites More sharing options...
colli003 Posted February 13, 2009 Share Posted February 13, 2009 i had one of these drives in my computer and have never been able to get it to burn the second layer of verb dl 2.4x dvd's at 2.4x. please let me know if you figure out how to make this drive work, because i bought another drive to replace it and cant get it to work either shoot me an email please (email removed) Link to comment Share on other sites More sharing options...
DOINKS Posted February 14, 2009 Author Share Posted February 14, 2009 i had one of these drives in my computer and have never been able to get it to burn the second layer of verb dl 2.4x dvd's at 2.4x. please let me know if you figure out how to make this drive work, because i bought another drive to replace it and cant get it to work either shoot me an email please (email removed) Sorry man, have had no joy so far, tried all 10 Verbatim at X2.4 using Imgburn AND cdcopy. 8 out of 10 disks didn't even start and the other 2 only got to 2%. I have seen that other people have had success with this drive after updating Firmware (Liggy & Dees3.01). Thanks to everyone for help but methinks a new burner is needed. D. Link to comment Share on other sites More sharing options...
Recommended Posts