Problem burning Dual-Layer ISO

[sariel]

I'm using Memorex DVD+R DL disks. I read forums about the recomended disks but could someone look at the below log to see if its is really the disk or something else causing the issue?

 

Thanks.

 

 

I 10:20:44 ImgBurn Version 2.4.2.0 started!

I 10:20:44 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2)

I 10:20:44 Total Physical Memory: 4,192,516 KB - Available: 3,417,976 KB

I 10:20:44 Initialising SPTI...

I 10:20:44 Searching for SCSI / ATAPI devices...

I 10:20:44 Found 1 DVD

[mmalves]

I 10:22:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)

I 10:22:44 Write Speed: 2.4x

Try the other available write speeds. Also make sure you have the latest drivers for your motherboard's chipset (use SIW/Sandra/similar programs to identify the chipset).

[sariel]

I tried 4x to now made 4 coasters so far . I think i'm up to date with all the firmware/drivers will have to doublecheck.

[LIGHTNING UK!]

It looks a lot like another nvidia driver issue.

[sariel]

It looks a lot like another nvidia driver issue.

 

ARG!!! Any known fixes?

[mmalves]

Using the ASPI interface (ImgBurn's settings -> I/O tab) seems to work for now, until the next ImgBurn version is released.

[sariel]

Using the ASPI interface (ImgBurn's settings -> I/O tab) seems to work for now, until the next ImgBurn version is released.

 

It said i'm missing the APSI manager so I downloaded the Adaptec one but i'm using XP64 and it doesn't seem to like that for some reason. Know of an xp64 version of this?

[mmalves]

Try Ner0 ASPI. You could also try the other interfaces available in the I/O tab.