Omnikill Posted February 16, 2009 Posted February 16, 2009 Please forgive my noobiness, everything seems to be working properly, I don't receive any error codes and Imgburn says that the process was completed successfully, and yet when I place the disc in my 360 the pretty little graphics play and then it tells me that this disc needs to be played in an xbox360 console. If necessary I can repeat the process and then post the log...
spinningwheel Posted February 16, 2009 Posted February 16, 2009 The log should be saved in: Help>ImgBurn logs
Omnikill Posted February 16, 2009 Author Posted February 16, 2009 The log should be saved in: Help>ImgBurn logs ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Monday, 16 February 2009, 03:06:26 ; \\****************************************// ; ; I 12:37:34 ImgBurn Version 2.4.2.0 started! I 12:37:34 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 12:37:34 Total Physical Memory: 3,536,516 KB - Available: 1,688,192 KB I 12:37:34 Initialising SPTI... I 12:37:34 Searching for SCSI / ATAPI devices... I 12:37:34 Found 1 DVD
LIGHTNING UK! Posted February 16, 2009 Posted February 16, 2009 You can't use ImgBurn to read your original xbox discs, they're protected against casual copying.
Omnikill Posted February 16, 2009 Author Posted February 16, 2009 The log should be saved in: Help>ImgBurn logs ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Monday, 16 February 2009, 03:06:26 ; \\****************************************// ; ; I 12:37:34 ImgBurn Version 2.4.2.0 started! I 12:37:34 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 12:37:34 Total Physical Memory: 3,536,516 KB - Available: 1,688,192 KB I 12:37:34 Initialising SPTI... I 12:37:34 Searching for SCSI / ATAPI devices... I 12:37:34 Found 1 DVD
LIGHTNING UK! Posted February 16, 2009 Posted February 16, 2009 No, ImgBurn is a burning tool and won't get around any form of copy protection.
Omnikill Posted February 16, 2009 Author Posted February 16, 2009 The log should be saved in: Help>ImgBurn logs ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Monday, 16 February 2009, 03:06:26 ; \\****************************************// ; ; I 12:37:34 ImgBurn Version 2.4.2.0 started! I 12:37:34 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 12:37:34 Total Physical Memory: 3,536,516 KB - Available: 1,688,192 KB I 12:37:34 Initialising SPTI... I 12:37:34 Searching for SCSI / ATAPI devices... I 12:37:34 Found 1 DVD
LIGHTNING UK! Posted February 16, 2009 Posted February 16, 2009 ImgBurn isn't advertised as anything. If some other site ripped you off by taking your money and providing you with my FREEWARE program, I'm afraid that's a problem between you and them. Oh and for the love of God, stop quoting your post with the log in it and wasting space on the forum server.
mmalves Posted February 16, 2009 Posted February 16, 2009 Look on the bright side: I 12:44:42 Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00) (Speeds: 6x, 8x)At least you didn't spend expensive discs as other people did. By the way... I 12:44:42 Destination Device: [1:0:0] ATAPI DVD A DH16AYH YH13 (E:) (ATA)I 12:52:48 Destination Device: [1:1:0] SONY DVD RW DRU-800A KY01 (F:) (ATA) There are firmware YH14 and KY06 (respectively) available for your burners. Remove any disc and close the tray before updating. Reboot after updating each one.
angeltreacys Posted June 10, 2009 Posted June 10, 2009 Hello everyone, I am also having anissue with the XBox360 disks I burn. I did eveything as required and it seem to do everything right. When I put it into the XBox360 Console it gives me the "Put this disk into an XBox360 console etc, etc........" issue. I have posted the log file pertaining to what I burned. It would be very helpful if anyone can explain why it does not run past that point. Thanks in advance. ; //****************************************\\ ; ImgBurn Version 2.4.4.0 - Log ; Wednesday, 10 June 2009, 09:11:42 ; \\****************************************// ; ; I 08:09:04 ImgBurn Version 2.4.4.0 started! I 08:09:04 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 08:09:04 Total Physical Memory: 1,048,048 KB - Available: 444,212 KB W 08:09:05 DVD43 can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 08:09:05 Initialising SPTI... I 08:09:05 Searching for SCSI / ATAPI devices... I 08:09:05 Found 1 CD-RW, 1 DVD-ROM and 1 DVD
mmalves Posted June 10, 2009 Posted June 10, 2009 From the log it seems to be a good burn that should work. You do know that your x360 needs a modification in order to run backups, right? Anyway, if it's not a problem with the burning then we can't help you By the way... I 08:10:20 Destination Device: [1:0:0] _NEC DVD_RW ND-3550A 1.05 (D:) (ATA) There's newer firmware available for your burner (remove any disc and close the tray before updating then reboot after it's finished).
angeltreacys Posted June 10, 2009 Posted June 10, 2009 Thanks for the fast respone. I had heard about it but did not know what it contains. Could you please point me in the direction of where I can find this information at. Thanks again.
Recommended Posts