error messages when trying to burn

[jcleav]

i posted on here a week or two ago and it was decided that my old dvd burner was toast, and i needed to get a new one. i got the new drive, but now i'm having different problems trying to burn...

 

(see attached image for error message)

 

even though this just happened 5 minutes ago (wednesday), my imgburn log doesn't have anything in it in the last week...so i don't have a log for this particular error.

 

thanks!

[LIGHTNING UK!]

Open the log window (or rather, stop closing it!) and then copy + paste from it.

[aun4649]

Hi! jcleav.

 

I had same problem.

 

You try burn at maximum speed supported by the media.

 

My case:

Writer: Pioneer DVR-116L (FW 1.09)

Media: Mitsubishi DVD+R DL (x2.4 - x8)

Burn x2.4 => NG(same problem )

Burn x8 => Good

[jcleav]

here's the most recent log

 

; //****************************************\\

; ImgBurn Version 2.2.0.0 - Log

; Wednesday, 18 February 2009, 11:46:33

; \\****************************************//

;

;

I 11:00:15 ImgBurn Version 2.2.0.0 started!

I 11:00:15 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 11:00:15 Total Physical Memory: 915,944 KB - Available: 524,904 KB

I 11:00:15 Initialising SPTI...

I 11:00:15 Searching for SCSI / ATAPI devices...

I 11:00:15 Found 1 DVD

[Cynthia]

Looks to me as that media (RITEK-S04-66) is not very well supported by that writer.

 

According to some posts there should be a 1.01 firmware version for that writer (a rebadged ASUS). I failed to find it.

 

http://forum.rpc1.org/viewtopic.php?f=2&am...p;sk=t&sd=a

 

You might get better chances with Verbatim 2.4x rated media.

[mmalves]

I 11:00:15 ImgBurn Version 2.2.0.0 started!

I 11:18:30 Destination Device: [1:0:0] PIONEER DVR-113NP 1.00 (D:) (ATA)

I 11:18:30 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)

I 11:18:30 Write Speed: 2.4x

Try the 1.01 firmware available in this page under the DVR-113KG series and maybe it works on your burner. You may also want to try burning at 6x or 8x to see if you get it to burn, but your media is low quality anyway.

 

Also please update ImgBurn to the latest version as you're way behind

[LIGHTNING UK!]

That firmware is now available here - http://www.firmwarehq.com/download_1146-fi...G_X152.zip.html