alloutwillie Posted February 26, 2009 Share Posted February 26, 2009 Hey, my burner burns disks fine up to 100% and then when the disk is to be finalized it usually fails at about 77% of this last process. I use Memorex disks; but I have not had this problem ever before and I have burned about 15 memorex disks or so. At this point I have tried about 10 other memorex disks that have all failed, again due to the same problem of disk finalization. I woudl think that out of ten at least one should have worked. I have tried deleting imgburn and reinstalling it and all that jazz, but to no avail. The error code I recieved before was "session fixation error writing lead out" The last three times that I have tried to burn, my burner gets stuck at the syncronizing cache stage and I can hear my disk reader continually spinning. On a side note, I can burn normal music dicks fine without any problems. Here is the last log. I 00:23:34 ImgBurn Version 2.4.2.0 started! I 00:23:34 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6001 : Service Pack 1) I 00:23:34 Total Physical Memory: 6,281,484 KB - Available: 4,456,692 KB I 00:23:34 Initialising SPTI... I 00:23:34 Searching for SCSI / ATAPI devices... I 00:23:34 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 26, 2009 Share Posted February 26, 2009 If 6x and 8x don't work either, read this http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
Recommended Posts