kcfried Posted March 4, 2009 Posted March 4, 2009 I recently reloaded windows on my PC and I'm having major issues with ImgBurn. I use it with DVDFlick, and it's always been fantastic in the past. I'm also running PowerISO with no problems and CD Burner XP works very well also. I've got an NEC DVD RW, and an Optiarc DVD. I've been using WinData DVD -R's with no issues for a long time. Here's teh error that occurs immedaitely: I/O Error! Device: [3:0:0]_NEC DVD +-RW ND-3650A 108C (D:) (SCSI) ScsiStatus 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10) - Sectors: 0-31 Sense Area: F0 02 00 00 00 00 00 0B A8 90 D4 87 00 00 00 00 00 00 00 00 10 00 00 C4 Interpretation: No Additional Sense Information ImgBurn used to work flawlessly - what happened?
Cynthia Posted March 5, 2009 Posted March 5, 2009 Hi and welcome to the forum, kcfried! Can you post the full log?
mmalves Posted March 5, 2009 Posted March 5, 2009 Until the next version of ImgBurn is released, use the ASPI interface (Tools menu -> Settings -> I/O tab). If it says you don't have ASPI, get Ner0 ASPI from ImgBurn's Download page.
kcfried Posted March 7, 2009 Author Posted March 7, 2009 Ok, I installed the ASPI drivers, and it's still a no-go. Attached is the log: *********************************************************** BEGIN LOG *********************************************************** I 07:57:16 ImgBurn Version 2.4.2.0 started! I 07:57:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 07:57:16 Total Physical Memory: 3,142,940 KB - Available: 2,515,212 KB I 07:57:16 Initialising ASPI... I 07:57:16 WNASPI32.DLL - Adaptec's ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.71.2.0 I 07:57:16 Searching for SCSI / ATAPI devices... I 07:57:16 Found 2 DVD
LIGHTNING UK! Posted March 7, 2009 Posted March 7, 2009 Wrong ASPI. Take that one off again and just use the nero aspi dll as mentioned in an earlier post.
kcfried Posted March 11, 2009 Author Posted March 11, 2009 Wrong ASPI.Take that one off again and just use the nero aspi dll as mentioned in an earlier post. that got it fixed - gracias!
Recommended Posts