thedp87 Posted March 6, 2009 Posted March 6, 2009 when i try to burn an iso to a dvd, i get this error message at the bottom of the window: Device Not Ready (Tracking Servo Failure). i searched but it did not turn up any results. heres the log I 00:56:17 ImgBurn Version 2.4.2.0 started! I 00:56:17 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 00:56:17 Total Physical Memory: 1,048,096 KB - Available: 576,332 KB I 00:56:17 Initialising SPTI... I 00:56:17 Searching for SCSI / ATAPI devices... I 00:56:19 Found 1 CD-RW, 1 DVD-ROM and 1 DVD
LIGHTNING UK! Posted March 6, 2009 Posted March 6, 2009 Is the firmware on that drive up-to-date? It would appear it doesn't support the discs you're trying to use.
thedp87 Posted March 6, 2009 Author Posted March 6, 2009 The firmware on the disk driveis up to date. The disks that i am using are dynex dvd-r 16X/120 min 4.7g. i guess that could be it cause those disks are best buy brand.
Shamus_McFartfinger Posted March 6, 2009 Posted March 6, 2009 The disk name or brand means nothing. Toss a blank into your burner and select WRITE MODE from the menu. Copy and paste the text from the window on the right to this forum. It'll look something like this: TSSTcorp CD/DVDW TS-H552U US08 (ATA) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2,298,496 Free Space: 4,707,319,808 bytes Free Time: 510:48:46 (MM:SS:FF) Supported Write Speeds: 2x, 4x, 6x, 8x Pre-recorded Information: Manufacturer ID: TYG02 Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 The Manufacturer ID is what we're interested in.
Recommended Posts