Danne Posted March 7, 2009 Posted March 7, 2009 Hey, Ive been using imgburn for quiet some time now, worked excellent with XP. I recentlly bought a new laptop with Vista 64bit and I keep getting this error. The burning process frezes at 1-4% then after about 30 minutes I get this message: I tried to brun the same files with other programs and it works fine. I belive its software problem, but Im not sure. Help greatly appreciated, thanks in advance.
Danne Posted March 7, 2009 Author Posted March 7, 2009 Right, sorry: ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; l
cornholio7 Posted March 7, 2009 Posted March 7, 2009 please read this http://forum.imgburn.com/index.php?showtopic=8000
Danne Posted March 7, 2009 Author Posted March 7, 2009 I wasn't trying to burn duble layer, just the regular 4.4gig-something IMG files. I use the same TDK+R discs as I always have and they never failed me once on my other computer with XP. Now I failed 4-5 times with Imgburn. Is it possible that imgburn doesnt work well with Vista 64bit?
LIGHTNING UK! Posted March 7, 2009 Posted March 7, 2009 The OS doesn't really come into it. ImgBurn sends an I/O command to the drive, the drive processes it and returns either 'success' or 'failure'... or at least that's how it's supposed to work. For whatever reason, yours has got stuck and then 1.5 hours later the command has 'timed out' - resulting in a bus reset. Issues like this are likely to be caused by dodgy drivers more than anything else. What controller does your motherboard use?
Cynthia Posted March 7, 2009 Posted March 7, 2009 This program (free) should be able to show you the info about drivers. http://www.gtopala.com/
Danne Posted March 7, 2009 Author Posted March 7, 2009 Got SIW, could you be a bit more specific where I find the controllers in question?
Cynthia Posted March 7, 2009 Posted March 7, 2009 Hardware -> Mother board and there should be something about a bridge. Property ValueManufacturer ASUSTeK Computer INC. Model P5W DH Deluxe Version Rev 1.xx Serial Number MB-1234567890 North Bridge Intel i975X Revision C0 South Bridge Intel 82801GB (ICH7/R) Revision C0 CPU Intel® Core2 Quad CPU @ 2.40GHz Cpu Socket Socket 775 LGA System Slots 7 PCI Memory Summary Maximum Capacity 4096 MBytes Maximum Memory Module Size 1024 MBytes Memory Slots 4 Error Correction None Varning Accuracy of DMI data cannot be guaranteed In my case it's Intel based.
Danne Posted March 7, 2009 Author Posted March 7, 2009 Property Value Manufacturer Compal Model 30F8 Version 99.87 Serial Number CND8453NLF North Bridge Intel PM45 Revision 07 South Bridge Intel 82801IM (ICH9-M) Revision 07 CPU Intel® Core2 Duo CPU P8400 @ 2.26GHz Cpu Socket Socket P (478) System Slots 6 PCI Memory Summary Maximum Capacity 8192 MBytes Memory Slots 2 Error Correction None Warning! Accuracy of DMI data cannot be guaranteed _____ Hope that helps.
LIGHTNING UK! Posted March 7, 2009 Posted March 7, 2009 These will (both?) apply to you then. http://www.intel.com/support/chipsets/inf/ http://support.intel.com/support/chipsets/imsm/
Danne Posted March 7, 2009 Author Posted March 7, 2009 It works now. It seems to be a bit slow, only writes with ~2x til 7% then ~4x til 40% then 6-8x til its complete. I'll try with an other brand of discs although these support up to 16x. Thanks alot, you guys are the best!
LIGHTNING UK! Posted March 7, 2009 Posted March 7, 2009 I 12:28:37 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2,4x; 4x; 6x; 8x) They're only supported up to 8x on your burner.... and the CMC dye really isn't all that good.
Recommended Posts